[Mon Sep  3 21:57:12 2012] Detection parameters:
  Position = (303.0, 234.8) = 12 58 45.59 -1 47 50.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 469.7 +/- 36.1
  Background counts = 360.6
  Rate = 0.02 +/- 0.001

[Mon Sep  3 21:57:13 2012] Off-axis axis estimate = 4.63'
[Mon Sep  3 22:01:17 2012] Using EEF radius (= 8.74 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 22:01:17 2012] Initial guess for spatial extent in simple fitting = 8.74"
[Mon Sep  3 22:01:17 2012] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.953
[Mon Sep  3 22:01:17 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.74"
[Tue Sep  4 02:08:44 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src29.ximg exists
[Tue Sep  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src29.csv
[Tue Sep  4 02:08:44 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue Sep  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src29.csv
[Tue Sep  4 02:08:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 02:08:46 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue Sep  4 02:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Tue Sep  4 02:08:46 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Sep  4 02:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Tue Sep  4 02:08:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 05:11:40 2012] Source 32 is offset by -1.637465 and -5.625749 pixels which is larger than
2 X fitted extent = 0.950363 x 0.950363, not incorporating fit results
[Tue Sep  4 05:11:40 2012] Source 32 is offset by -6.566937 and -5.153312 pixels which is larger than
2 X fitted extent = 5.389058 x 5.389058, not incorporating fit results
[Tue Sep  4 05:11:40 2012] Spatial fit model total counts = 4630.010000, observed total counts = 4441.000000
[Tue Sep  4 05:11:40 2012] Offset between fit and detection position for source 32 = 4.511490 pixels
[Tue Sep  4 05:11:40 2012] Warning, changing simple spatial fit ID from 29 to 39
[Tue Sep  4 05:11:40 2012] 4591.029290 total counts/ 4589.170000 bgd. counts: snr = 0.027446
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 4.511490 pixels
  Position = (307.5, 234.5) = 12 58 44.29 -1 47 53.5
  Extent = 18.6" x 18.6", rotation angle = 0
  Source counts = 1.9 +/- 67.8
  Background counts = 4589.2
  Rate = 5e-05 +/- 0.002
  Deleting source due to low Poisson probability