[Mon Sep  3 21:57:12 2012] Detection parameters:
  Position = (297.5, 286.0) = 12 58 47.20 -1 44 9.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 697.6 +/- 47.4
  Background counts = 436.1
  Rate = 0.02 +/- 0.001

[Mon Sep  3 21:57:13 2012] Off-axis axis estimate = 0.90'
[Mon Sep  3 22:01:17 2012] Using EEF radius (= 6.88 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 22:01:17 2012] Initial guess for spatial extent in simple fitting = 6.88"
[Mon Sep  3 22:01:17 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.154
[Mon Sep  3 22:01:17 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 6.88"
[Tue Sep  4 02:08:44 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src23.ximg exists
[Tue Sep  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src23.csv
[Tue Sep  4 02:08:44 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src23_1.ximg exists
[Tue Sep  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src23.csv
[Tue Sep  4 02:08:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 02:08:46 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Tue Sep  4 02:08:46 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Tue Sep  4 02:08:46 2012] Fit fullrun_pn_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Tue Sep  4 05:11:40 2012] Spatial fit model total counts = 8733.360000, observed total counts = 8723.000000
[Tue Sep  4 05:11:40 2012] Offset between fit and detection position for source 26 = 7.941639 pixels
[Tue Sep  4 05:11:40 2012] 8779.961000 total counts/ 8423.660000 bgd. counts: snr = 3.882099
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 7.941639 pixels
  Position = (303.3, 280.7) = 12 58 45.49 -1 44 32.8
  Extent = 13.8 (13.7-27.5)", rotation angle = 0
  Source counts = 356.3 +/- 93.7
  Background counts = 8423.7
  Rate = 0.01 +/- 0.003
[Tue Sep  4 05:11:40 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 05:11:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 05:11:40 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 05:11:40 2012] Source does appear to be extended
[Tue Sep  4 05:11:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 05:11:40 2012] Source is confused with source 64
[Tue Sep  4 05:12:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep  4 05:12:14 2012] Initial guess for spatial extent in simple fitting = 13.76"
[Tue Sep  4 05:12:14 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.913
[Tue Sep  4 05:12:14 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 13.76"
[Tue Sep  4 07:26:56 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src23.ximg exists
[Tue Sep  4 07:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src23.csv
[Tue Sep  4 07:26:56 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src23_1.ximg exists
[Tue Sep  4 07:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src23.csv
[Tue Sep  4 07:26:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 07:26:57 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Tue Sep  4 07:26:57 2012] fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Tue Sep  4 07:26:57 2012] Fit fullrun_pn_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Tue Sep  4 09:12:55 2012] Spatial fit model total counts = 27576.000000, observed total counts = 18963.000000
[Tue Sep  4 09:12:55 2012] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Sep  4 09:12:56 2012] Warning, spatial fit 23 centroid is now closest to src. 2
[Tue Sep  4 09:12:56 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 09:12:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 09:12:56 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 09:12:56 2012] Source does appear to be extended
[Tue Sep  4 09:12:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 09:13:18 2012] XMMSAS src. selection expression = ellipse(26340.922000, 24370.078000, 825.630024, 825.630024, 0.000000, X, Y)
[Tue Sep  4 09:13:18 2012] Writing source region out to fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src26_src.reg
[Tue Sep  4 09:13:18 2012] Extracting stamp from image fullrun_pn_xmm0093200101_pi300-10000_cl_sm2.00.img.gz, (256, 233) - (351, 328)
[Tue Sep  4 09:13:18 2012] XMMSAS bgd. selection expression = annulus(26340.922000, 24370.078000, 1376.050040, 2752.100079, X, Y) && !ellipse(27525.951140, 22982.865200, 3765.600108, 3765.600108, 0.000000, X, Y) && !ellipse(27423.173096, 24237.076874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25028.150800, 26142.508400, 426.578412, 407.506412, 0.000000, X, Y) && !ellipse(28238.591003, 24641.026306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29217.688812, 24194.713226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24672.958000, 22982.312000, 692.743220, 692.743220, 0.000000, X, Y) && !ellipse(25570.079468, 22030.227142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29925.824951, 22250.987518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25828.618256, 21501.328049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27257.780701, 26752.085236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29061.076599, 26321.423553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25266.861847, 24305.287231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25110.419556, 21358.199402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25846.752106, 20917.088852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28083.417816, 27071.721558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24667.481018, 21784.400635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27516.515961, 27268.204346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28671.960815, 27277.090729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29019.166962, 26829.553680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26026.781677, 26644.394592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24729.462000, 24899.724000, 2261.792065, 525.765615, 89.900879, X, Y) && !ellipse(24027.656128, 23275.966888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26235.948000, 19347.770000, 2867.648083, 1629.216047, 90.000000, X, Y)
[Tue Sep  4 09:13:18 2012] Writing fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src26.gif
[Tue Sep  4 09:44:22 2012] Mean detx,y = (-853.23, -229.68) 
[Tue Sep  4 09:44:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 09:44:36 2012] grppha failed
[Tue Sep  4 09:44:36 2012] Setting source spectrum file to fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src26_src.pi.gz
[Tue Sep  4 09:44:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue Sep  4 10:53:48 2012] Updating aperture counts using extracted products
[Tue Sep  4 10:53:48 2012] Error reading totcts from fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src26_src.pi.gz
[Tue Sep  4 10:53:51 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 10:53:59 2012] Flag p found in src. 26 procflags, skipping spectral fitting
[Tue Sep  4 10:53:59 2012] Flag c found in src. 26 procflags, skipping spectral fitting
[Tue Sep  4 10:53:59 2012] Source 26 has no response, skipping
[Tue Sep  4 10:54:00 2012] xmm0093200101/analysis//spectral/fullrun_pn_xmm0093200101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete