[Mon Sep  3 21:57:39 2012] Detection parameters:
  Position = (300.3, 241.1) = 12 58 46.38 -1 47 25.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 208.5 +/- 27.9
  Background counts = 197.1
  Rate = 0.005 +/- 0.0007

[Mon Sep  3 21:57:40 2012] Off-axis axis estimate = 4.16'
[Tue Sep  4 02:08:47 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 02:08:47 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Tue Sep  4 02:08:47 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.036
[Tue Sep  4 02:08:47 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.51"
[Tue Sep  4 03:35:33 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src23.ximg exists
[Tue Sep  4 03:35:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src23.csv
[Tue Sep  4 03:35:33 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src23_1.ximg exists
[Tue Sep  4 03:35:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src23.csv
[Tue Sep  4 03:35:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 03:35:34 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Tue Sep  4 03:35:34 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Tue Sep  4 03:35:34 2012] Fit fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Tue Sep  4 05:11:50 2012] Warning, spatial fit 23 centroid is now closest to src. 39
[Tue Sep  4 05:11:50 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 05:11:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 05:11:50 2012] Assessing source extent using major
[Tue Sep  4 05:11:50 2012] Source does appear to be extended
[Tue Sep  4 05:11:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 05:11:50 2012] Source is confused with source 42
[Tue Sep  4 07:26:58 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 07:26:58 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Tue Sep  4 07:26:58 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.036
[Tue Sep  4 07:26:58 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 8.51"
[Tue Sep  4 08:24:01 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src21.ximg exists
[Tue Sep  4 08:24:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src21.csv
[Tue Sep  4 08:24:01 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src21_1.ximg exists
[Tue Sep  4 08:24:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src21.csv
[Tue Sep  4 08:24:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 08:24:02 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Tue Sep  4 08:24:02 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Tue Sep  4 08:24:02 2012] Fit fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Tue Sep  4 09:13:01 2012] Spatial fit model total counts = 3446.660000, observed total counts = 3368.000000
[Tue Sep  4 09:13:01 2012] Offset between fit and detection position for source 43 = 8.429471 pixels
[Tue Sep  4 09:13:01 2012] 3518.648000 total counts/ 3232.560000 bgd. counts: snr = 5.031834
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 8.429471 pixels
  Position = (293.8, 235.7) = 12 58 48.27 -1 47 48.2
  Extent = 17.0 (17.0-34.0)", rotation angle = 0
  Source counts = 286.1 +/- 59.3
  Background counts = 3232.6
  Rate = 0.007 +/- 0.001
[Tue Sep  4 09:13:01 2012] Source 43 is offset by 1.815531 and 4.284552 pixels which is larger than
2 X fitted extent = 0.991228 x 0.991228, not incorporating fit results
[Tue Sep  4 09:13:01 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 09:13:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 09:13:01 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 09:13:01 2012] Source does appear to be extended
[Tue Sep  4 09:13:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 10:04:30 2012] XMMSAS src. selection expression = ellipse(25508.166000, 20461.478000, 1021.020029, 1021.020029, 0.000000, X, Y)
[Tue Sep  4 10:04:30 2012] Writing source region out to fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src43_src.reg
[Tue Sep  4 10:04:30 2012] Extracting stamp from image fullrun_mos1_xmm0093200101_pi300-10000_cl_sm2.00.img.gz, (235, 177) - (352, 294)
[Tue Sep  4 10:04:30 2012] XMMSAS bgd. selection expression = annulus(25508.166000, 20461.478000, 1701.700049, 3403.400098, X, Y) && !ellipse(27454.260020, 22869.757600, 7341.336211, 7341.336211, 0.000000, X, Y) && !ellipse(27738.397000, 24097.336000, 2341.600067, 2341.600067, 0.000000, X, Y) && !ellipse(27684.441254, 20258.771683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26852.463928, 19832.056702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26210.664000, 21641.798000, 2616.184075, 2616.184075, 0.000000, X, Y) && !ellipse(26904.600739, 21109.370056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28829.900000, 24869.308000, 1260.736036, 1260.736036, 0.000000, X, Y) && !ellipse(28129.174591, 20425.232727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24545.418701, 21933.700897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25204.580170, 23698.501526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26554.320000, 24906.208000, 1072.584031, 1072.584031, 0.000000, X, Y) && !ellipse(25123.008000, 21144.662000, 2676.128077, 2676.128077, 0.000000, X, Y) && !ellipse(24232.887238, 21258.053024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24837.606000, 20886.455200, 1382.872040, 1382.872040, 0.000000, X, Y)
[Tue Sep  4 10:04:30 2012] Writing fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src43.gif
[Tue Sep  4 10:17:21 2012] Mean detx,y = (3275.53, 1181.00) 
[Tue Sep  4 10:17:22 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 10:17:33 2012] grppha failed
[Tue Sep  4 10:17:33 2012] Setting source spectrum file to fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src43_src.pi.gz
[Tue Sep  4 10:17:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Tue Sep  4 10:53:53 2012] Updating aperture counts using extracted products
[Tue Sep  4 10:53:53 2012] Error reading totcts from fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src43_src.pi.gz
[Tue Sep  4 10:53:53 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 10:53:57 2012] Flag b found in src. 43 procflags, skipping spectral fitting
[Tue Sep  4 10:53:57 2012] Flag c found in src. 43 procflags, skipping spectral fitting
[Tue Sep  4 10:53:57 2012] Source 43 has no response, skipping
[Tue Sep  4 10:53:58 2012] xmm0093200101/analysis//spectral/fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete