[Mon Sep  3 21:57:39 2012] Detection parameters:
  Position = (283.7, 239.2) = 12 58 51.18 -1 47 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.8 +/- 20.8
  Background counts = 150.4
  Rate = 0.002 +/- 0.0005

[Mon Sep  3 21:57:40 2012] Off-axis axis estimate = 4.43'
[Tue Sep  4 02:08:47 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 02:08:47 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Tue Sep  4 02:08:47 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.011
[Tue Sep  4 02:08:47 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 8.64"
[Tue Sep  4 03:35:34 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src42.ximg exists
[Tue Sep  4 03:35:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src42.csv
[Tue Sep  4 03:35:34 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src42_1.ximg exists
[Tue Sep  4 03:35:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src42.csv
[Tue Sep  4 03:35:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 03:35:35 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Tue Sep  4 03:35:35 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Tue Sep  4 03:35:35 2012] Fit fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Tue Sep  4 05:11:50 2012] Spatial fit model total counts = 1654.340000, observed total counts = 1607.000000
[Tue Sep  4 05:11:50 2012] Offset between fit and detection position for source 40 = 2.538669 pixels
[Tue Sep  4 05:11:50 2012] Warning, changing simple spatial fit ID from 42 to 32
[Tue Sep  4 05:11:50 2012] 1653.715000 total counts/ 1527.470000 bgd. counts: snr = 3.230188
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 2.538669 pixels
  Position = (285.3, 241.1) = 12 58 50.71 -1 47 24.9
  Extent = 17.0 (16.9-34.0)", rotation angle = 0
  Source counts = 126.2 +/- 40.7
  Background counts = 1527.5
  Rate = 0.003 +/- 0.001
[Tue Sep  4 05:11:50 2012] Spatial fit model total counts = 1749.920000, observed total counts = 1744.000000
[Tue Sep  4 05:11:50 2012] Offset between fit and detection position for source 40 = 0.844690 pixels
[Tue Sep  4 05:11:50 2012] Warning, changing simple spatial fit ID from 32 to 42
[Tue Sep  4 05:11:50 2012] 1739.035000 total counts/ 1571.130000 bgd. counts: snr = 4.236016
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.844690 pixels
  Position = (286.0, 240.6) = 12 58 50.50 -1 47 27.0
  Extent = 17.3 (17.2-34.6)", rotation angle = 0
  Source counts = 167.9 +/- 41.7
  Background counts = 1571.1
  Rate = 0.004 +/- 0.001
[Tue Sep  4 05:11:50 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 05:11:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 05:11:50 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 05:11:50 2012] Source does appear to be extended
[Tue Sep  4 05:11:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 05:11:50 2012] Source is confused with source 37
[Tue Sep  4 07:26:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep  4 07:26:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep  4 07:26:58 2012] Initial guess for spatial extent in simple fitting = 17.29"
[Tue Sep  4 07:26:58 2012] source mask rpix=4.0, npix_max = 80, mask sum = 81, frac = 1.012
[Tue Sep  4 07:26:58 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 17.29"
[Tue Sep  4 08:24:01 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src34.ximg exists
[Tue Sep  4 08:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src34.csv
[Tue Sep  4 08:24:01 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src34_1.ximg exists
[Tue Sep  4 08:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src34.csv
[Tue Sep  4 08:24:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 08:24:02 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Tue Sep  4 08:24:02 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Tue Sep  4 08:24:02 2012] Fit fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Tue Sep  4 09:13:01 2012] Warning, spatial fit 34 centroid is now closest to src. 32
[Tue Sep  4 09:13:01 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 09:13:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 09:13:01 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 09:13:01 2012] Source does appear to be extended
[Tue Sep  4 09:13:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 10:04:30 2012] XMMSAS src. selection expression = ellipse(24837.606000, 20886.455200, 1037.154030, 1037.154030, 0.000000, X, Y)
[Tue Sep  4 10:04:30 2012] Writing source region out to fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src40_src.reg
[Tue Sep  4 10:04:30 2012] Extracting stamp from image fullrun_mos1_xmm0093200101_pi300-10000_cl_sm2.00.img.gz, (226, 181) - (346, 300)
[Tue Sep  4 10:04:30 2012] XMMSAS bgd. selection expression = annulus(24837.606000, 20886.455200, 1728.590050, 3457.180099, X, Y) && !ellipse(27454.260020, 22869.757600, 7341.336211, 7341.336211, 0.000000, X, Y) && !ellipse(27738.397000, 24097.336000, 2341.600067, 2341.600067, 0.000000, X, Y) && !ellipse(27684.441254, 20258.771683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26852.463928, 19832.056702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26210.664000, 21641.798000, 2616.184075, 2616.184075, 0.000000, X, Y) && !ellipse(26904.600739, 21109.370056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27660.108000, 25231.488000, 1171.592034, 1171.592034, 0.000000, X, Y) && !ellipse(28829.900000, 24869.308000, 1260.736036, 1260.736036, 0.000000, X, Y) && !ellipse(28129.174591, 20425.232727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24545.418701, 21933.700897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25508.166000, 20461.478000, 1361.360039, 1361.360039, 0.000000, X, Y) && !ellipse(25204.580170, 23698.501526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26554.320000, 24906.208000, 1072.584031, 1072.584031, 0.000000, X, Y) && !ellipse(25123.008000, 21144.662000, 2676.128077, 2676.128077, 0.000000, X, Y) && !ellipse(24232.887238, 21258.053024, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 10:04:30 2012] Writing fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src40.gif
[Tue Sep  4 10:31:06 2012] Mean detx,y = (2721.17, 1590.38) 
[Tue Sep  4 10:31:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 10:31:25 2012] grppha failed
[Tue Sep  4 10:31:25 2012] Setting source spectrum file to fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src40_src.pi.gz
[Tue Sep  4 10:31:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Tue Sep  4 10:53:53 2012] Updating aperture counts using extracted products
[Tue Sep  4 10:53:53 2012] Error reading totcts from fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src40_src.pi.gz
[Tue Sep  4 10:53:53 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 10:53:57 2012] Flag c found in src. 40 procflags, skipping spectral fitting
[Tue Sep  4 10:53:57 2012] Source 40 has no response, skipping
[Tue Sep  4 10:53:58 2012] xmm0093200101/analysis//spectral/fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete