[Mon Sep  3 21:57:39 2012] Detection parameters:
  Position = (102.2, 252.9) = 12 59 43.84 -1 46 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.8 +/- 14.1
  Background counts = 23.4
  Rate = 0.002 +/- 0.0003

[Mon Sep  3 21:57:40 2012] Off-axis axis estimate = 14.60'
[Tue Sep  4 02:08:47 2012] Using EEF radius (= 13.73 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 02:08:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep  4 02:08:47 2012] Initial guess for spatial extent in simple fitting = 13.73"
[Tue Sep  4 02:08:47 2012] source mask rpix=3.2, npix_max = 53, mask sum = 53, frac = 0.991
[Tue Sep  4 02:08:47 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 13.73"
[Tue Sep  4 03:35:34 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src46.ximg exists
[Tue Sep  4 03:35:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src46.csv
[Tue Sep  4 03:35:34 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src46_1.ximg exists
[Tue Sep  4 03:35:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src46.csv
[Tue Sep  4 03:35:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 03:35:35 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Tue Sep  4 03:35:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src46.csv
[Tue Sep  4 03:35:35 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Tue Sep  4 03:35:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src46.csv
[Tue Sep  4 03:35:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 05:11:50 2012] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 14.870165 pixels away
[Tue Sep  4 05:11:50 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 05:11:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 05:11:50 2012] Assessing source extent using major
[Tue Sep  4 05:11:50 2012] Source does appear to be extended
[Tue Sep  4 05:11:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 05:11:50 2012] Deleting source due to low Poisson probability 0.9