[Mon Sep  3 21:57:39 2012] Detection parameters:
  Position = (295.8, 281.0) = 12 58 47.68 -1 44 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 269.4 +/- 30.1
  Background counts = 210.9
  Rate = 0.006 +/- 0.0007

[Mon Sep  3 21:57:40 2012] Off-axis axis estimate = 1.28'
[Tue Sep  4 02:08:47 2012] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 02:08:47 2012] Initial guess for spatial extent in simple fitting = 7.07"
[Tue Sep  4 02:08:47 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.886
[Tue Sep  4 02:08:47 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.07"
[Tue Sep  4 03:35:33 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src16.ximg exists
[Tue Sep  4 03:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src16.csv
[Tue Sep  4 03:35:33 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Sep  4 03:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src16.csv
[Tue Sep  4 03:35:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 03:35:34 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Sep  4 03:35:34 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Sep  4 03:35:34 2012] Fit fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Tue Sep  4 05:11:50 2012] Source 28 is offset by -5.716966 and 4.934483 pixels which is larger than
2 X fitted extent = 2.597150 x 2.597150, not incorporating fit results
[Tue Sep  4 05:11:50 2012] Spatial fit model total counts = 3001.480000, observed total counts = 3002.000000
[Tue Sep  4 05:11:50 2012] Offset between fit and detection position for source 28 = 0.594045 pixels
[Tue Sep  4 05:11:50 2012] Warning, changing simple spatial fit ID from 16 to 26
[Tue Sep  4 05:11:50 2012] 3002.471500 total counts/ 2972.000000 bgd. counts: snr = 0.558945
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.594045 pixels
  Position = (295.4, 280.5) = 12 58 47.78 -1 44 33.3
  Extent = 1.8" x 1.8", rotation angle = 0
  Source counts = 30.5 +/- 54.8
  Background counts = 2972.0
  Rate = 0.0008 +/- 0.001
  Deleting source due to low Poisson probability