[Mon Sep  3 21:57:39 2012] Detection parameters:
  Position = (337.6, 290.0) = 12 58 35.56 -1 43 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 221.6 +/- 28.3
  Background counts = 245.6
  Rate = 0.006 +/- 0.0008

[Mon Sep  3 21:57:40 2012] Off-axis axis estimate = 2.90'
[Tue Sep  4 02:08:47 2012] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 02:08:47 2012] Initial guess for spatial extent in simple fitting = 7.88"
[Tue Sep  4 02:08:47 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.936
[Tue Sep  4 02:08:47 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.88"
[Tue Sep  4 03:35:33 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src17.ximg exists
[Tue Sep  4 03:35:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src17.csv
[Tue Sep  4 03:35:33 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Sep  4 03:35:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src17.csv
[Tue Sep  4 03:35:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 03:35:34 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Sep  4 03:35:34 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Sep  4 03:35:34 2012] Fit fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue Sep  4 05:11:50 2012] Warning, spatial fit 17 centroid is now closest to src. 23
[Tue Sep  4 05:11:50 2012] Source 25 is offset by -4.550610 and -5.050452 pixels which is larger than
2 X fitted extent = 1.308984 x 1.308984, not incorporating fit results
[Tue Sep  4 05:11:50 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 05:11:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 05:11:50 2012] Assessing source extent using major
[Tue Sep  4 05:11:50 2012] Source does appear to be extended
[Tue Sep  4 05:11:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 07:26:58 2012] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 07:26:58 2012] Initial guess for spatial extent in simple fitting = 7.88"
[Tue Sep  4 07:26:58 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.936
[Tue Sep  4 07:26:58 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 7.88"
[Tue Sep  4 08:24:01 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src16.ximg exists
[Tue Sep  4 08:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src16.csv
[Tue Sep  4 08:24:01 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Sep  4 08:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src16.csv
[Tue Sep  4 08:24:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 08:24:02 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Sep  4 08:24:02 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Sep  4 08:24:02 2012] Fit fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Tue Sep  4 09:13:01 2012] Spatial fit model total counts = 3443.340000, observed total counts = 3443.000000
[Tue Sep  4 09:13:01 2012] Offset between fit and detection position for source 25 = 6.687045 pixels
[Tue Sep  4 09:13:01 2012] 3324.535000 total counts/ 2998.880000 bgd. counts: snr = 5.946730
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 6.687045 pixels
  Position = (331.9, 286.4) = 12 58 37.19 -1 44 7.8
  Extent = 15.8 (15.7-31.5)", rotation angle = 0
  Source counts = 325.7 +/- 57.7
  Background counts = 2998.9
  Rate = 0.008 +/- 0.001
[Tue Sep  4 09:13:01 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 09:13:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 09:13:01 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 09:13:01 2012] Source does appear to be extended
[Tue Sep  4 09:13:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 09:13:01 2012] Source is confused with source 2
[Tue Sep  4 10:04:30 2012] XMMSAS src. selection expression = ellipse(28829.900000, 24869.308000, 945.552027, 945.552027, 0.000000, X, Y)
[Tue Sep  4 10:04:30 2012] Writing source region out to fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src25_src.reg
[Tue Sep  4 10:04:30 2012] Extracting stamp from image fullrun_mos1_xmm0093200101_pi300-10000_cl_sm2.00.img.gz, (278, 232) - (386, 341)
[Tue Sep  4 10:04:30 2012] XMMSAS bgd. selection expression = annulus(28829.900000, 24869.308000, 1575.920045, 3151.840091, X, Y) && !ellipse(27454.260020, 22869.757600, 7341.336211, 7341.336211, 0.000000, X, Y) && !ellipse(27738.397000, 24097.336000, 2341.600067, 2341.600067, 0.000000, X, Y) && !ellipse(32338.104919, 26336.304993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26210.664000, 21641.798000, 2616.184075, 2616.184075, 0.000000, X, Y) && !ellipse(26904.600739, 21109.370056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27660.108000, 25231.488000, 1171.592034, 1171.592034, 0.000000, X, Y) && !ellipse(28879.538971, 25871.852753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25508.166000, 20461.478000, 1361.360039, 1361.360039, 0.000000, X, Y) && !ellipse(25204.580170, 23698.501526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26554.320000, 24906.208000, 1072.584031, 1072.584031, 0.000000, X, Y) && !ellipse(28553.182770, 26383.299011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25123.008000, 21144.662000, 2676.128077, 2676.128077, 0.000000, X, Y) && !ellipse(24837.606000, 20886.455200, 1382.872040, 1382.872040, 0.000000, X, Y)
[Tue Sep  4 10:04:30 2012] Writing fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src25.gif
[Tue Sep  4 10:16:25 2012] Mean detx,y = (803.58, -3415.22) 
[Tue Sep  4 10:16:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 10:16:35 2012] grppha failed
[Tue Sep  4 10:16:36 2012] Setting source spectrum file to fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src25_src.pi.gz
[Tue Sep  4 10:16:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Sep  4 10:53:52 2012] Updating aperture counts using extracted products
[Tue Sep  4 10:53:52 2012] Error reading totcts from fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src25_src.pi.gz
[Tue Sep  4 10:53:53 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 10:53:57 2012] Flag b found in src. 25 procflags, skipping spectral fitting
[Tue Sep  4 10:53:57 2012] Flag c found in src. 25 procflags, skipping spectral fitting
[Tue Sep  4 10:53:57 2012] Source 25 has no response, skipping
[Tue Sep  4 10:53:58 2012] xmm0093200101/analysis//spectral/fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete