[Mon Sep 3 21:57:38 2012] Detection parameters: Position = (316.2, 261.0) = 12 58 41.75 -1 45 57.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 5700.4 +/- 96.9 Background counts = 309.4 Rate = 0.1 +/- 0.003 [Mon Sep 3 21:57:40 2012] Off-axis axis estimate = 3.01' [Tue Sep 4 02:08:47 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting [Tue Sep 4 02:08:47 2012] Initial guess for spatial extent in simple fitting = 7.93" [Tue Sep 4 02:08:47 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.926 [Tue Sep 4 02:08:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.93" [Tue Sep 4 03:35:33 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src1.ximg exists [Tue Sep 4 03:35:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src1.csv [Tue Sep 4 03:35:33 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src1_1.ximg exists [Tue Sep 4 03:35:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src1.csv [Tue Sep 4 03:35:33 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Sep 4 03:35:34 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Tue Sep 4 03:35:34 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Tue Sep 4 03:35:34 2012] Fit fullrun_mos1_xmm0093200101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Tue Sep 4 05:11:50 2012] Warning, spatial fit 1 centroid is now closest to src. 2 [Tue Sep 4 05:11:50 2012] Spatial fit model total counts = 19160.000000, observed total counts = 18672.000000 [Tue Sep 4 05:11:50 2012] Offset between fit and detection position for source 1 = 3.634898 pixels [Tue Sep 4 05:11:50 2012] Warning, changing simple spatial fit ID from 1 to 2 [Tue Sep 4 05:11:50 2012] 19221.180000 total counts/ 14008.800000 bgd. counts: snr = 44.038813 Spatial fit parameters: Offset between fit and detection position for source 1 = 3.634898 pixels Position = (316.5, 264.6) = 12 58 41.66 -1 45 42.8 Extent = 15.4 (15.3-30.7)", rotation angle = 0 Source counts = 5212.4 +/- 138.6 Background counts = 14008.8 Rate = 0.1 +/- 0.003 [Tue Sep 4 05:11:50 2012] Vigneting correction estimate = 1.000000 [Tue Sep 4 05:11:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Sep 4 05:11:50 2012] Assessing source extent using major axis lower bound [Tue Sep 4 05:11:50 2012] Source does appear to be extended [Tue Sep 4 05:11:50 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Sep 4 05:11:50 2012] Source is confused with source 2 [Tue Sep 4 07:26:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Sep 4 07:26:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Sep 4 07:26:58 2012] Initial guess for spatial extent in simple fitting = 15.37" [Tue Sep 4 07:26:58 2012] source mask rpix=3.5, npix_max = 65, mask sum = 50, frac = 0.769 [Tue Sep 4 07:26:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 15.37" [Tue Sep 4 08:24:01 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src1.ximg exists [Tue Sep 4 08:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src1.csv [Tue Sep 4 08:24:01 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src1_1.ximg exists [Tue Sep 4 08:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src1.csv [Tue Sep 4 08:24:01 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Sep 4 08:24:01 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Tue Sep 4 08:24:01 2012] fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Tue Sep 4 08:24:01 2012] Fit fullrun_mos1_xmm0093200101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Tue Sep 4 09:13:01 2012] Spatial fit model total counts = 43416.900000, observed total counts = 42941.000000 [Tue Sep 4 09:13:01 2012] Offset between fit and detection position for source 1 = 1.219933 pixels [Tue Sep 4 09:13:01 2012] 42583.400000 total counts/ 18584.100000 bgd. counts: snr = 176.046667 Spatial fit parameters: Offset between fit and detection position for source 1 = 1.219933 pixels Position = (316.1, 263.4) = 12 58 41.78 -1 45 47.8 Extent = 30.6 (30.3-30.7)", rotation angle = 0 Source counts = 23999.3 +/- 206.4 Background counts = 18584.1 Rate = 0.6 +/- 0.005 [Tue Sep 4 09:13:01 2012] Vigneting correction estimate = 1.000000 [Tue Sep 4 09:13:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Sep 4 09:13:01 2012] Assessing source extent using major axis lower bound [Tue Sep 4 09:13:01 2012] Source does appear to be extended [Tue Sep 4 09:13:01 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Sep 4 10:04:29 2012] Counts = 23999.300000, rescaling region sizes by 3.000000 [Tue Sep 4 10:04:29 2012] XMMSAS src. selection expression = ellipse(27454.260020, 22869.757600, 5506.002158, 5506.002158, 0.000000, X, Y) [Tue Sep 4 10:04:29 2012] Writing source region out to fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src1_src.reg [Tue Sep 4 10:04:29 2012] Extracting stamp from image fullrun_mos1_xmm0093200101_pi300-10000_cl_sm2.00.img.gz, (0, 0) - (595, 580) [Tue Sep 4 10:04:29 2012] XMMSAS bgd. selection expression = annulus(27454.260020, 22869.757600, 27530.010792, 55060.021584, X, Y) && !ellipse(27738.397000, 24097.336000, 2341.600067, 2341.600067, 0.000000, X, Y) && !ellipse(25021.449780, 26138.727000, 388.770411, 388.770411, 0.000000, X, Y) && !ellipse(20058.628937, 19538.638794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27684.441254, 20258.771683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19999.812073, 16623.032974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32338.104919, 26336.304993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29324.811000, 20905.926000, 351.336010, 351.336010, 0.000000, X, Y) && !ellipse(26852.463928, 19832.056702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26210.664000, 21641.798000, 2616.184075, 2616.184075, 0.000000, X, Y) && !ellipse(24299.979828, 9702.336700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26904.600739, 21109.370056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22085.551800, 27505.493200, 386.012811, 386.012811, 0.000000, X, Y) && !ellipse(27660.108000, 25231.488000, 1171.592034, 1171.592034, 0.000000, X, Y) && !ellipse(28829.900000, 24869.308000, 1260.736036, 1260.736036, 0.000000, X, Y) && !ellipse(28129.174591, 20425.232727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24545.418701, 21933.700897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28879.538971, 25871.852753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25508.166000, 20461.478000, 1361.360039, 1361.360039, 0.000000, X, Y) && !ellipse(23581.197021, 37688.164185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25204.580170, 23698.501526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26554.320000, 24906.208000, 1072.584031, 1072.584031, 0.000000, X, Y) && !ellipse(28553.182770, 26383.299011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25123.008000, 21144.662000, 2676.128077, 2676.128077, 0.000000, X, Y) && !ellipse(22492.499603, 14124.155243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24232.887238, 21258.053024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38144.815948, 21810.696045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24837.606000, 20886.455200, 1382.872040, 1382.872040, 0.000000, X, Y) [Tue Sep 4 10:04:29 2012] Writing fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src1.gif [Tue Sep 4 10:04:37 2012] Mean detx,y = (1717.43, -1495.85) [Tue Sep 4 10:04:38 2012] Setting backscal keywords in source and bgd. spectrum [Tue Sep 4 10:05:38 2012] grppha failed [Tue Sep 4 10:05:38 2012] Setting source spectrum file to fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src1_src.pi.gz [Tue Sep 4 10:05:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src1_bgd.pi.gz [Tue Sep 4 10:53:51 2012] Updating aperture counts using extracted products [Tue Sep 4 10:53:51 2012] Error reading totcts from fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src1_src.pi.gz [Tue Sep 4 10:53:53 2012] No arf file for this source, not re-computing flux [Tue Sep 4 10:53:57 2012] Flag c found in src. 1 procflags, skipping spectral fitting [Tue Sep 4 10:53:57 2012] Source 1 has no response, skipping [Tue Sep 4 10:53:58 2012] xmm0093200101/analysis//spectral/fullrun_mos1_xmm0093200101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete