[Mon Oct  3 23:35:08 2011] Detection parameters:
  Position = (432.0, 176.8) = 7 8 33.99 20 25 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.5 +/- 14.4
  Background counts = 6.7
  Rate = 0.005 +/- 0.0005

[Mon Oct  3 23:35:08 2011] Off-axis axis estimate = 13.10'
[Tue Oct  4 00:40:33 2011] Using EEF radius (= 12.98 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 00:40:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 00:40:33 2011] Initial guess for spatial extent in simple fitting = 12.98"
[Tue Oct  4 00:40:33 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.010
[Tue Oct  4 00:40:33 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 12.98"
[Tue Oct  4 01:11:23 2011] fullrun_mos2_xmm0093190501_pi300-10000_cl_pass0_src8.ximg exists
[Tue Oct  4 01:11:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093190501_pi300-10000_cl_pass0_src8.csv
[Tue Oct  4 01:11:23 2011] fullrun_mos2_xmm0093190501_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue Oct  4 01:11:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093190501_pi300-10000_cl_pass0_src8.csv
[Tue Oct  4 01:11:23 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093190501_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093190501_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 01:11:23 2011] fullrun_mos2_xmm0093190501_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue Oct  4 01:11:23 2011] fullrun_mos2_xmm0093190501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Oct  4 01:11:23 2011] Fit fullrun_mos2_xmm0093190501_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Tue Oct  4 01:11:35 2011] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.042444 pixels away
[Tue Oct  4 01:11:35 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 01:11:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 01:11:35 2011] Assessing source extent using major
[Tue Oct  4 01:11:35 2011] Source does appear to be extended
[Tue Oct  4 01:11:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 02:26:23 2011] Using EEF radius (= 12.98 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 02:26:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 02:26:23 2011] Initial guess for spatial extent in simple fitting = 12.98"
[Tue Oct  4 02:26:23 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.010
[Tue Oct  4 02:26:23 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 12.98"
[Tue Oct  4 03:03:38 2011] fullrun_mos2_xmm0093190501_pi300-10000_cl_pass1_src8.ximg exists
[Tue Oct  4 03:03:38 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0093190501_pi300-10000_cl_pass1_src8.csv
[Tue Oct  4 03:03:38 2011] fullrun_mos2_xmm0093190501_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue Oct  4 03:03:38 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0093190501_pi300-10000_cl_pass1_src8.csv
[Tue Oct  4 03:03:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093190501_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093190501_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 03:03:38 2011] fullrun_mos2_xmm0093190501_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue Oct  4 03:03:38 2011] fullrun_mos2_xmm0093190501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Oct  4 03:03:38 2011] Fit fullrun_mos2_xmm0093190501_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue Oct  4 03:03:54 2011] Spatial fit model total counts = 200.998000, observed total counts = 201.000000
[Tue Oct  4 03:03:54 2011] Offset between fit and detection position for source 5 = 0.288519 pixels
[Tue Oct  4 03:03:54 2011] 203.283600 total counts/ 116.937000 bgd. counts: snr = 7.984896
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.288519 pixels
  Position = (431.8, 176.6) = 7 8 34.06 20 25 45.0
  Extent = 5.9 (4.2-7.6)", rotation angle = 0
  Source counts = 86.3 +/- 14.3
  Background counts = 116.9
  Rate = 0.003 +/- 0.0005
[Tue Oct  4 03:03:54 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 03:03:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 03:03:54 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 03:03:54 2011] Source does appear to be extended
[Tue Oct  4 03:03:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 04:16:46 2011] XMMSAS src. selection expression = ellipse(37515.541200, 15314.512200, 352.846234, 352.846234, 0.000000, X, Y)
[Tue Oct  4 04:16:46 2011] Writing source region out to fullrun_mos2_xmm0093190501_pi300-10000_pass1_cl_src5_src.reg
[Tue Oct  4 04:16:46 2011] Extracting stamp from image fullrun_mos2_xmm0093190501_pi300-10000_cl_sm2.00.img.gz, (411, 156) - (452, 197)
[Tue Oct  4 04:16:46 2011] XMMSAS bgd. selection expression = annulus(37515.541200, 15314.512200, 588.077056, 1176.154112, X, Y)
[Tue Oct  4 04:16:46 2011] Writing fullrun_mos2_xmm0093190501_pi300-10000_pass1_cl_src5.gif
[Tue Oct  4 04:18:06 2011] Mean detx,y = (-9207.94, -13415.74) 
[Tue Oct  4 04:18:07 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Oct  4 04:18:12 2011] Binned source spectrum to 10 counts/bin
[Tue Oct  4 04:18:12 2011] Setting source spectrum file to fullrun_mos2_xmm0093190501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Oct  4 04:18:12 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0093190501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Oct  4 04:35:46 2011] Not generating rmf since there are only 86 counts
[Tue Oct  4 04:35:46 2011] rmf not generated due to insufficient counts
[Tue Oct  4 04:40:55 2011] Updating aperture counts using extracted products
[Tue Oct  4 04:40:55 2011] Error reading totcts from fullrun_mos2_xmm0093190501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Oct  4 04:40:55 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 04:40:55 2011] Using photon index=1.80, rate=0.00301, arf fullrun_mos2_xmm0093190501_pi300-10000_pass1_cl_src5.arf
[Tue Oct  4 04:40:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Oct  4 04:40:55 2011] Updating source flux to 9.7e-14
[Tue Oct  4 04:41:23 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting