[Mon Oct  3 23:34:52 2011] Detection parameters:
  Position = (290.7, 347.9) = 7 9 17.72 20 38 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 642.1 +/- 31.4
  Background counts = 9.9
  Rate = 0.02 +/- 0.001

[Mon Oct  3 23:34:53 2011] Off-axis axis estimate = 3.63'
[Tue Oct  4 00:19:42 2011] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 00:19:42 2011] Initial guess for spatial extent in simple fitting = 8.24"
[Tue Oct  4 00:19:42 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.871
[Tue Oct  4 00:19:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 8.24"
[Tue Oct  4 00:40:33 2011] fullrun_mos1_xmm0093190501_pi300-10000_cl_pass0_src1.ximg exists
[Tue Oct  4 00:40:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093190501_pi300-10000_cl_pass0_src1.csv
[Tue Oct  4 00:40:33 2011] fullrun_mos1_xmm0093190501_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Oct  4 00:40:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093190501_pi300-10000_cl_pass0_src1.csv
[Tue Oct  4 00:40:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093190501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093190501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 00:40:33 2011] fullrun_mos1_xmm0093190501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct  4 00:40:33 2011] fullrun_mos1_xmm0093190501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct  4 00:40:33 2011] Fit fullrun_mos1_xmm0093190501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct  4 01:11:32 2011] Spatial fit model total counts = 859.216000, observed total counts = 858.000000
[Tue Oct  4 01:11:32 2011] Offset between fit and detection position for source 2 = 0.521714 pixels
[Tue Oct  4 01:11:32 2011] 851.603000 total counts/ 306.745000 bgd. counts: snr = 31.109611
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.521714 pixels
  Position = (290.2, 347.9) = 7 9 17.88 20 38 10.5
  Extent = 8.1 (7.3-8.9)", rotation angle = 0
  Source counts = 544.9 +/- 29.2
  Background counts = 306.7
  Rate = 0.02 +/- 0.001
[Tue Oct  4 01:11:32 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 01:11:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 01:11:32 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 01:11:32 2011] Source does appear to be extended
[Tue Oct  4 01:11:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 01:58:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 01:58:08 2011] Initial guess for spatial extent in simple fitting = 8.06"
[Tue Oct  4 01:58:08 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.903
[Tue Oct  4 01:58:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 8.06"
[Tue Oct  4 02:26:22 2011] fullrun_mos1_xmm0093190501_pi300-10000_cl_pass1_src1.ximg exists
[Tue Oct  4 02:26:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093190501_pi300-10000_cl_pass1_src1.csv
[Tue Oct  4 02:26:22 2011] fullrun_mos1_xmm0093190501_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Oct  4 02:26:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093190501_pi300-10000_cl_pass1_src1.csv
[Tue Oct  4 02:26:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093190501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093190501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 02:26:22 2011] fullrun_mos1_xmm0093190501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct  4 02:26:22 2011] fullrun_mos1_xmm0093190501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct  4 02:26:22 2011] Fit fullrun_mos1_xmm0093190501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct  4 03:03:49 2011] Spatial fit model total counts = 858.093000, observed total counts = 858.000000
[Tue Oct  4 03:03:49 2011] Offset between fit and detection position for source 2 = 0.017831 pixels
[Tue Oct  4 03:03:49 2011] 852.120000 total counts/ 288.300000 bgd. counts: snr = 33.206122
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.017831 pixels
  Position = (290.2, 347.9) = 7 9 17.88 20 38 10.5
  Extent = 8.3 (7.6-9.2)", rotation angle = 0
  Source counts = 563.8 +/- 29.2
  Background counts = 288.3
  Rate = 0.02 +/- 0.001
[Tue Oct  4 03:03:49 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 03:03:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 03:03:49 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 03:03:49 2011] Source does appear to be extended
[Tue Oct  4 03:03:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 03:54:00 2011] XMMSAS src. selection expression = ellipse(25195.743080, 30216.697400, 500.775614, 500.775614, 0.000000, X, Y)
[Tue Oct  4 03:54:00 2011] Writing source region out to fullrun_mos1_xmm0093190501_pi300-10000_pass1_cl_src2_src.reg
[Tue Oct  4 03:54:00 2011] Extracting stamp from image fullrun_mos1_xmm0093190501_pi300-10000_cl_sm2.00.img.gz, (261, 319) - (319, 377)
[Tue Oct  4 03:54:00 2011] XMMSAS bgd. selection expression = annulus(25195.743080, 30216.697400, 834.626024, 1669.252048, X, Y)
[Tue Oct  4 03:54:00 2011] Writing fullrun_mos1_xmm0093190501_pi300-10000_pass1_cl_src2.gif
[Tue Oct  4 03:54:02 2011] Mean detx,y = (2948.32, -1606.61) 
[Tue Oct  4 03:54:03 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Oct  4 03:54:08 2011] Binned source spectrum to 10 counts/bin
[Tue Oct  4 03:54:08 2011] Setting source spectrum file to fullrun_mos1_xmm0093190501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Oct  4 03:54:08 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0093190501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Oct  4 04:40:54 2011] Updating aperture counts using extracted products
[Tue Oct  4 04:40:54 2011] Error reading totcts from fullrun_mos1_xmm0093190501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Oct  4 04:40:55 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 04:40:55 2011] Using photon index=1.80, rate=0.0197, arf fullrun_mos1_xmm0093190501_pi300-10000_pass1_cl_src2.arf
[Tue Oct  4 04:40:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Oct  4 04:40:55 2011] Updating source flux to 2.2e-13
[Tue Oct  4 04:41:23 2011] Reading fit data from xmm0093190501/analysis//spectral/fullrun_mos1_xmm0093190501_pi300-10000_pass1_cl_src2_pl.csv
[Tue Oct  4 04:41:23 2011] Spectral fit parameter nH value = 1.7057e+21
[Tue Oct  4 04:41:23 2011] Spectral fit parameter PhoIndex value = 2.1181
[Tue Oct  4 04:41:23 2011] Failed to get F(0.3-8.0) from xmm0093190501/analysis//spectral/fullrun_mos1_xmm0093190501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Oct  4 04:41:23 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 04:41:23 2011] Using Nh = 1.7e+21, photon index=2.12, rate=0.0197, arf fullrun_mos1_xmm0093190501_pi300-10000_pass1_cl_src2.arf
[Tue Oct  4 04:41:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Oct  4 04:41:23 2011] Updating source flux to 2.2e-13