[Fri Oct  7 09:06:44 2011] Detection parameters:
  Position = (319.6, 247.3) = 23 51 9.94 20 3 0.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.2 +/- 13.8
  Background counts = 8.0
  Rate = 0.005 +/- 0.0005

[Fri Oct  7 09:06:45 2011] Off-axis axis estimate = 4.01'
[Fri Oct  7 11:14:27 2011] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 11:14:27 2011] Initial guess for spatial extent in simple fitting = 8.44"
[Fri Oct  7 11:14:27 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.050
[Fri Oct  7 11:14:27 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 8.44"
[Fri Oct  7 12:06:37 2011] fullrun_mos2_xmm0093190301_pi300-10000_cl_pass0_src6.ximg exists
[Fri Oct  7 12:06:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093190301_pi300-10000_cl_pass0_src6.csv
[Fri Oct  7 12:06:37 2011] fullrun_mos2_xmm0093190301_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Oct  7 12:06:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093190301_pi300-10000_cl_pass0_src6.csv
[Fri Oct  7 12:06:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093190301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093190301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 12:06:38 2011] fullrun_mos2_xmm0093190301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Oct  7 12:06:38 2011] fullrun_mos2_xmm0093190301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Oct  7 12:06:38 2011] Fit fullrun_mos2_xmm0093190301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Oct  7 12:07:00 2011] Source 9 is offset by -3.416054 and -7.782870 pixels which is larger than
2 X fitted extent = 0.969646 x 0.969646, not incorporating fit results
[Fri Oct  7 12:07:00 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 12:07:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 12:07:00 2011] Assessing source extent using major
[Fri Oct  7 12:07:00 2011] Source does appear to be extended
[Fri Oct  7 12:07:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:39:25 2011] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:39:25 2011] Initial guess for spatial extent in simple fitting = 8.44"
[Fri Oct  7 13:39:25 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.050
[Fri Oct  7 13:39:25 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 8.44"
[Fri Oct  7 14:16:46 2011] fullrun_mos2_xmm0093190301_pi300-10000_cl_pass1_src6.ximg exists
[Fri Oct  7 14:16:46 2011] fullrun_mos2_xmm0093190301_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Oct  7 14:16:46 2011] Fit fullrun_mos2_xmm0093190301_pi300-10000_cl_pass1_src6 appears to have run properly
[Fri Oct  7 14:16:46 2011] fullrun_mos2_xmm0093190301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Oct  7 14:16:46 2011] fullrun_mos2_xmm0093190301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Oct  7 14:16:46 2011] Fit fullrun_mos2_xmm0093190301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Oct  7 14:17:00 2011] Source 9 is offset by -3.416054 and -7.782870 pixels which is larger than
2 X fitted extent = 0.969646 x 0.969646, not incorporating fit results
[Fri Oct  7 14:17:00 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 14:17:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 14:17:00 2011] Assessing source extent using major
[Fri Oct  7 14:17:00 2011] Source does appear to be extended
[Fri Oct  7 14:17:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 15:26:05 2011] XMMSAS src. selection expression = ellipse(27754.855286, 21462.778351, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Oct  7 15:26:05 2011] Writing source region out to fullrun_mos2_xmm0093190301_pi300-10000_pass1_cl_src9_src.reg
[Fri Oct  7 15:26:05 2011] Extracting stamp from image fullrun_mos2_xmm0093190301_pi300-10000_cl_sm2.00.img.gz, (282, 210) - (357, 285)
[Fri Oct  7 15:26:05 2011] XMMSAS bgd. selection expression = annulus(27754.855286, 21462.778351, 1087.500000, 2175.000000, X, Y)
[Fri Oct  7 15:26:05 2011] Writing fullrun_mos2_xmm0093190301_pi300-10000_pass1_cl_src9.gif
[Fri Oct  7 15:26:51 2011] Mean detx,y = (4646.42, 1710.57) 
[Fri Oct  7 15:26:51 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct  7 15:26:58 2011] Binned source spectrum to 10 counts/bin
[Fri Oct  7 15:26:58 2011] Setting source spectrum file to fullrun_mos2_xmm0093190301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Oct  7 15:26:58 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0093190301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Oct  7 15:46:46 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Oct  7 15:46:46 2011] rmf not generated due to insufficient counts
[Fri Oct  7 15:47:58 2011] Updating aperture counts using extracted products
[Fri Oct  7 15:47:59 2011] Error reading totcts from fullrun_mos2_xmm0093190301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Oct  7 15:47:59 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 15:47:59 2011] Using photon index=1.80, rate=0.00463, arf fullrun_mos2_xmm0093190301_pi300-10000_pass1_cl_src9.arf
[Fri Oct  7 15:47:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct  7 15:47:59 2011] Updating source flux to 6.3e-14
[Fri Oct  7 15:48:25 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting