[Thu Aug 16 18:16:47 2012] Detection parameters:
  Position = (300.9, 318.0) = 10 28 38.80 -8 44 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1144.0 +/- 40.7
  Background counts = 3.8
  Rate = 0.2 +/- 0.006

[Thu Aug 16 18:16:47 2012] Off-axis axis estimate = 1.43'
[Thu Aug 16 18:35:48 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 18:35:48 2012] Initial guess for spatial extent in simple fitting = 7.14"
[Thu Aug 16 18:35:48 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.872
[Thu Aug 16 18:35:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.14"
[Thu Aug 16 18:45:21 2012] fullrun_mos2_xmm0093160701_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug 16 18:45:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093160701_pi300-10000_cl_pass0_src1.csv
[Thu Aug 16 18:45:21 2012] fullrun_mos2_xmm0093160701_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug 16 18:45:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093160701_pi300-10000_cl_pass0_src1.csv
[Thu Aug 16 18:45:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093160701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093160701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 18:45:21 2012] fullrun_mos2_xmm0093160701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug 16 18:45:21 2012] fullrun_mos2_xmm0093160701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug 16 18:45:21 2012] Fit fullrun_mos2_xmm0093160701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug 16 18:45:26 2012] Source 1 is offset by 6.502456 and 5.545211 pixels which is larger than
2 X fitted extent = 0.820998 x 0.820998, not incorporating fit results
[Thu Aug 16 18:45:26 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 18:45:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 18:45:26 2012] Assessing source extent using major
[Thu Aug 16 18:45:26 2012] Source does appear to be extended
[Thu Aug 16 18:45:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 19:03:20 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 19:03:20 2012] Initial guess for spatial extent in simple fitting = 7.14"
[Thu Aug 16 19:03:20 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.872
[Thu Aug 16 19:03:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.14"
[Thu Aug 16 19:11:55 2012] fullrun_mos2_xmm0093160701_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug 16 19:11:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093160701_pi300-10000_cl_pass1_src1.csv
[Thu Aug 16 19:11:55 2012] fullrun_mos2_xmm0093160701_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug 16 19:11:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093160701_pi300-10000_cl_pass1_src1.csv
[Thu Aug 16 19:11:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093160701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093160701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 19:11:55 2012] fullrun_mos2_xmm0093160701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug 16 19:11:55 2012] fullrun_mos2_xmm0093160701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug 16 19:11:55 2012] Fit fullrun_mos2_xmm0093160701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug 16 19:12:00 2012] Spatial fit model total counts = 992.279000, observed total counts = 993.000000
[Thu Aug 16 19:12:00 2012] Offset between fit and detection position for source 1 = 0.091920 pixels
[Thu Aug 16 19:12:00 2012] 990.668000 total counts/ 237.280000 bgd. counts: snr = 48.908927
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.091920 pixels
  Position = (300.8, 318.0) = 10 28 38.82 -8 44 39.7
  Extent = 5.1 (4.8-5.4)", rotation angle = 0
  Source counts = 753.4 +/- 31.5
  Background counts = 237.3
  Rate = 0.1 +/- 0.004
[Thu Aug 16 19:12:00 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 19:12:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 19:12:00 2012] Assessing source extent using major axis lower bound
[Thu Aug 16 19:12:00 2012] Source does appear to be extended
[Thu Aug 16 19:12:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 19:27:35 2012] XMMSAS src. selection expression = ellipse(26124.824860, 27614.923800, 303.252862, 303.252862, 0.000000, X, Y)
[Thu Aug 16 19:27:35 2012] Writing source region out to fullrun_mos2_xmm0093160701_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug 16 19:27:35 2012] Extracting stamp from image fullrun_mos2_xmm0093160701_pi300-10000_cl_sm2.00.img.gz, (283, 301) - (318, 335)
[Thu Aug 16 19:27:35 2012] XMMSAS bgd. selection expression = annulus(26124.824860, 27614.923800, 505.421437, 1010.842874, X, Y)
[Thu Aug 16 19:27:35 2012] Writing fullrun_mos2_xmm0093160701_pi300-10000_pass1_cl_src1.gif
[Thu Aug 16 19:27:37 2012] Mean detx,y = (502.61, -62.99) 
[Thu Aug 16 19:27:38 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 19:27:42 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 19:27:42 2012] Setting source spectrum file to fullrun_mos2_xmm0093160701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug 16 19:27:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093160701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug 16 19:33:17 2012] Updating aperture counts using extracted products
[Thu Aug 16 19:33:17 2012] Error reading totcts from fullrun_mos2_xmm0093160701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug 16 19:33:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 19:33:17 2012] Using photon index=1.80, rate=0.104, arf fullrun_mos2_xmm0093160701_pi300-10000_pass1_cl_src1.arf
[Thu Aug 16 19:33:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 19:33:17 2012] Updating source flux to 1.3e-12
[Thu Aug 16 19:33:24 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Thu Aug 16 19:33:30 2012] Reading fit data from xmm0093160701/analysis//spectral/fullrun_mos2_xmm0093160701_pi300-10000_pass1_cl_src1_pl.csv
[Thu Aug 16 19:33:30 2012] Spectral fit parameter nH value = 5.28135e+20
[Thu Aug 16 19:33:30 2012] Spectral fit parameter PhoIndex value = 1.27206
[Thu Aug 16 19:33:30 2012] Failed to get F(0.3-8.0) from xmm0093160701/analysis//spectral/fullrun_mos2_xmm0093160701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Aug 16 19:33:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 19:33:30 2012] Using Nh = 5.3e+20, photon index=1.27, rate=0.104, arf fullrun_mos2_xmm0093160701_pi300-10000_pass1_cl_src1.arf
[Thu Aug 16 19:33:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 19:33:30 2012] Updating source flux to 1.9e-12