[Thu Jun 14 14:26:50 2012] Detection parameters:
  Position = (301.6, 261.0) = 16 4 53.75 23 54 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 265.3 +/- 23.2
  Background counts = 89.1
  Rate = 0.02 +/- 0.002

[Thu Jun 14 14:26:51 2012] Off-axis axis estimate = 2.72'
[Thu Jun 14 14:28:43 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:28:43 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Thu Jun 14 14:28:43 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.857
[Thu Jun 14 14:28:43 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.79"
[Thu Jun 14 15:59:55 2012] fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_src28.ximg exists
[Thu Jun 14 15:59:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_src28.csv
[Thu Jun 14 15:59:55 2012] fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu Jun 14 15:59:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_src28.csv
[Thu Jun 14 15:59:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:59:56 2012] fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu Jun 14 15:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Jun 14 15:59:56 2012] fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Jun 14 15:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Jun 14 15:59:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 18:27:52 2012] Warning, spatial fit 28 centroid is now closest to src. 33
[Thu Jun 14 18:27:52 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 18:27:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 18:27:52 2012] Assessing source extent using major
[Thu Jun 14 18:27:52 2012] Source does appear to be extended
[Thu Jun 14 18:27:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 18:27:52 2012] Source is confused with source 27
[Thu Jun 14 18:28:14 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 18:28:14 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Thu Jun 14 18:28:14 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.857
[Thu Jun 14 18:28:14 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 7.79"
[Thu Jun 14 20:05:44 2012] fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_src21.ximg exists
[Thu Jun 14 20:05:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_src21.csv
[Thu Jun 14 20:05:44 2012] fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Jun 14 20:05:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_src21.csv
[Thu Jun 14 20:05:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:05:45 2012] fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Jun 14 20:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Jun 14 20:05:45 2012] fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Jun 14 20:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Jun 14 20:05:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 22:08:17 2012] Source 29 is offset by 5.864590 and -0.791512 pixels which is larger than
2 X fitted extent = 5.222299 x 5.061317, not incorporating fit results
[Thu Jun 14 22:08:17 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 10.955787 pixels away
[Thu Jun 14 22:08:17 2012] Spatial fit model total counts = 1573.140000, observed total counts = 1335.000000
[Thu Jun 14 22:08:17 2012] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 14 22:08:17 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 22:08:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 22:08:17 2012] Assessing source extent using major
[Thu Jun 14 22:08:17 2012] Source does appear to be extended
[Thu Jun 14 22:08:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 22:08:37 2012] XMMSAS src. selection expression = ellipse(26192.036011, 22658.736298, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 22:08:37 2012] Writing source region out to fullrun_pn_xmm0093060401_pi300-10000_pass1_cl_src29_src.reg
[Thu Jun 14 22:08:37 2012] Extracting stamp from image fullrun_pn_xmm0093060401_pi300-10000_cl_sm2.00.img.gz, (264, 224) - (339, 299)
[Thu Jun 14 22:08:37 2012] XMMSAS bgd. selection expression = annulus(26192.036011, 22658.736298, 1087.500000, 2175.000000, X, Y) && !ellipse(25473.306200, 24458.364000, 1098.272032, 1098.272032, 0.000000, X, Y) && !ellipse(25414.695560, 24015.006000, 2012.960058, 2012.960058, 0.000000, X, Y) && !ellipse(25452.690002, 22261.084595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26662.289490, 25693.086975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27222.399780, 25241.524902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23457.199188, 25112.601990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23769.868713, 24664.743683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27335.474823, 23381.846802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23623.961578, 23186.314514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26661.227478, 22752.169434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23994.040802, 22380.911377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27726.910000, 21864.482000, 1295.728037, 1295.728037, 0.000000, X, Y) && !ellipse(26606.934784, 22067.625885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24998.071991, 21953.602997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25429.320435, 21280.307480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24728.066800, 20641.832000, 1354.472039, 1354.472039, 0.000000, X, Y)
[Thu Jun 14 22:08:37 2012] Writing fullrun_pn_xmm0093060401_pi300-10000_pass1_cl_src29.gif
[Thu Jun 14 22:24:09 2012] Mean detx,y = (153.31, -1565.56) 
[Thu Jun 14 22:24:11 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 22:24:22 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 22:24:22 2012] Setting source spectrum file to fullrun_pn_xmm0093060401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Thu Jun 14 22:24:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093060401_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Fri Jun 15 10:32:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 10:32:07 2012] rmf not generated due to insufficient counts
[Fri Jun 15 13:23:33 2012] Updating aperture counts using extracted products
[Fri Jun 15 13:23:33 2012] Error reading totcts from fullrun_pn_xmm0093060401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jun 15 13:23:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 13:23:34 2012] Using photon index=1.80, rate=0.0204, arf fullrun_pn_xmm0093060401_pi300-10000_pass1_cl_src29.arf
[Fri Jun 15 13:23:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 13:23:34 2012] Updating source flux to 5.8e-14
[Fri Jun 15 13:24:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting