[Thu Jun 14 14:26:50 2012] Detection parameters:
  Position = (307.0, 295.9) = 16 4 52.03 23 57 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.2 +/- 20.3
  Background counts = 83.1
  Rate = 0.01 +/- 0.001

[Thu Jun 14 14:26:51 2012] Off-axis axis estimate = 0.65'
[Thu Jun 14 14:28:43 2012] Using EEF radius (= 6.75 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:28:43 2012] Initial guess for spatial extent in simple fitting = 6.75"
[Thu Jun 14 14:28:43 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.950
[Thu Jun 14 14:28:43 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 6.75"
[Thu Jun 14 15:59:55 2012] fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_src17.ximg exists
[Thu Jun 14 15:59:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_src17.csv
[Thu Jun 14 15:59:55 2012] fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu Jun 14 15:59:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_src17.csv
[Thu Jun 14 15:59:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:59:56 2012] fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu Jun 14 15:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu Jun 14 15:59:56 2012] fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Jun 14 15:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu Jun 14 15:59:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 18:27:52 2012] Warning, spatial fit 17 centroid is now closest to src. 20
[Thu Jun 14 18:27:52 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 18:27:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 18:27:52 2012] Assessing source extent using major
[Thu Jun 14 18:27:52 2012] Source does appear to be extended
[Thu Jun 14 18:27:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 18:27:52 2012] Source is confused with source 14
[Thu Jun 14 18:28:14 2012] Using EEF radius (= 6.75 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 18:28:14 2012] Initial guess for spatial extent in simple fitting = 6.75"
[Thu Jun 14 18:28:14 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.950
[Thu Jun 14 18:28:14 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 6.75"
[Thu Jun 14 20:05:44 2012] fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_src12.ximg exists
[Thu Jun 14 20:05:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_src12.csv
[Thu Jun 14 20:05:44 2012] fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu Jun 14 20:05:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_src12.csv
[Thu Jun 14 20:05:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:05:45 2012] fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu Jun 14 20:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src12.csv
[Thu Jun 14 20:05:45 2012] fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Jun 14 20:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src12.csv
[Thu Jun 14 20:05:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 22:08:17 2012] Source 18 is offset by 6.230454 and 4.506356 pixels which is larger than
2 X fitted extent = 6.202621 x 6.202621, not incorporating fit results
[Thu Jun 14 22:08:17 2012] Source 18 is offset by 0.091006 and 1.219207 pixels which is larger than
2 X fitted extent = 0.809343 x 0.809343, not incorporating fit results
[Thu Jun 14 22:08:17 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 22:08:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 22:08:17 2012] Assessing source extent using major
[Thu Jun 14 22:08:17 2012] Source does appear to be extended
[Thu Jun 14 22:08:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 22:08:36 2012] XMMSAS src. selection expression = ellipse(26662.289490, 25693.086975, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 22:08:36 2012] Writing source region out to fullrun_pn_xmm0093060401_pi300-10000_pass1_cl_src18_src.reg
[Thu Jun 14 22:08:36 2012] Extracting stamp from image fullrun_pn_xmm0093060401_pi300-10000_cl_sm2.00.img.gz, (270, 258) - (345, 333)
[Thu Jun 14 22:08:36 2012] XMMSAS bgd. selection expression = annulus(26662.289490, 25693.086975, 1087.500000, 2175.000000, X, Y) && !ellipse(25473.306200, 24458.364000, 1098.272032, 1098.272032, 0.000000, X, Y) && !ellipse(25414.695560, 24015.006000, 2012.960058, 2012.960058, 0.000000, X, Y) && !ellipse(25631.216827, 26654.220856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25152.977020, 26652.662354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26296.437073, 26559.800049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24318.299530, 26496.432465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26469.645874, 26127.056824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25063.462708, 25782.457916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27222.399780, 25241.524902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23769.868713, 24664.743683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27335.474823, 23381.846802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23623.961578, 23186.314514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26661.227478, 22752.169434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26192.036011, 22658.736298, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 22:08:36 2012] Writing fullrun_pn_xmm0093060401_pi300-10000_pass1_cl_src18.gif
[Thu Jun 14 22:21:36 2012] Mean detx,y = (-1496.40, 917.49) 
[Thu Jun 14 22:21:37 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 22:21:50 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 22:21:50 2012] Setting source spectrum file to fullrun_pn_xmm0093060401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Jun 14 22:21:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093060401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri Jun 15 10:27:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 10:27:08 2012] rmf not generated due to insufficient counts
[Fri Jun 15 13:23:33 2012] Updating aperture counts using extracted products
[Fri Jun 15 13:23:33 2012] Error reading totcts from fullrun_pn_xmm0093060401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Jun 15 13:23:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 13:23:34 2012] Using photon index=1.80, rate=0.0101, arf fullrun_pn_xmm0093060401_pi300-10000_pass1_cl_src18.arf
[Fri Jun 15 13:23:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 13:23:34 2012] Updating source flux to 3.1e-14
[Fri Jun 15 13:24:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting