[Thu Jun 14 14:27:37 2012] Detection parameters:
  Position = (302.1, 268.1) = 16 4 53.58 23 55 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 235.8 +/- 23.1
  Background counts = 53.4
  Rate = 0.01 +/- 0.001

[Thu Jun 14 14:27:38 2012] Off-axis axis estimate = 2.22'
[Thu Jun 14 17:12:22 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 17:12:22 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Thu Jun 14 17:12:22 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.802
[Thu Jun 14 17:12:22 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.54"
[Thu Jun 14 18:27:40 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jun 14 18:27:40 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jun 14 18:27:40 2012] Fit fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src5 appears to have run properly
[Thu Jun 14 18:27:41 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jun 14 18:27:41 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jun 14 18:27:41 2012] Fit fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jun 14 18:28:05 2012] Source 9 is offset by 7.075795 and -3.671388 pixels which is larger than
2 X fitted extent = 1.371136 x 1.371136, not incorporating fit results
[Thu Jun 14 18:28:05 2012] Spatial fit model total counts = 934.757000, observed total counts = 901.000000
[Thu Jun 14 18:28:05 2012] Offset between fit and detection position for source 9 = 3.699003 pixels
[Thu Jun 14 18:28:05 2012] Warning, changing simple spatial fit ID from 5 to 15
[Thu Jun 14 18:28:05 2012] 917.219000 total counts/ 831.324000 bgd. counts: snr = 2.979084
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 3.699003 pixels
  Position = (298.8, 266.6) = 16 4 54.66 23 55 17.9
  Extent = 12.5 (6.9-15.8)", rotation angle = 0
  Source counts = 85.9 +/- 30.3
  Background counts = 831.3
  Rate = 0.005 +/- 0.002
[Thu Jun 14 18:28:05 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 18:28:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 18:28:05 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 18:28:05 2012] Source does appear to be extended
[Thu Jun 14 18:28:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 21:08:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 21:08:59 2012] Initial guess for spatial extent in simple fitting = 12.45"
[Thu Jun 14 21:08:59 2012] source mask rpix=2.9, npix_max = 45, mask sum = 45, frac = 0.995
[Thu Jun 14 21:08:59 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.45"
[Thu Jun 14 22:08:08 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jun 14 22:08:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src5.csv
[Thu Jun 14 22:08:08 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jun 14 22:08:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src5.csv
[Thu Jun 14 22:08:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 22:08:08 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jun 14 22:08:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Jun 14 22:08:08 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jun 14 22:08:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Jun 14 22:08:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 22:08:28 2012] Warning, spatial fit 5 centroid is now closest to src. 8
[Thu Jun 14 22:08:28 2012] Spatial fit model total counts = 933.930000, observed total counts = 901.000000
[Thu Jun 14 22:08:28 2012] Offset between fit and detection position for source 9 = 0.152299 pixels
[Thu Jun 14 22:08:28 2012] Warning, changing simple spatial fit ID from 5 to 15
[Thu Jun 14 22:08:28 2012] 916.063400 total counts/ 832.921000 bgd. counts: snr = 2.880850
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.152299 pixels
  Position = (298.8, 266.4) = 16 4 54.66 23 55 17.2
  Extent = 12.7 (6.9-15.8)", rotation angle = 0
  Source counts = 83.1 +/- 30.3
  Background counts = 832.9
  Rate = 0.005 +/- 0.002
[Thu Jun 14 22:08:28 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 22:08:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 22:08:28 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 22:08:28 2012] Source does appear to be extended
[Thu Jun 14 22:08:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 13:12:32 2012] XMMSAS src. selection expression = ellipse(25943.138000, 23131.328000, 759.078022, 759.078022, 0.000000, X, Y)
[Fri Jun 15 13:12:32 2012] Writing source region out to fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src9_src.reg
[Fri Jun 15 13:12:32 2012] Extracting stamp from image fullrun_mos2_xmm0093060401_pi300-10000_cl_sm2.00.img.gz, (255, 223) - (342, 310)
[Fri Jun 15 13:12:32 2012] XMMSAS bgd. selection expression = annulus(25943.138000, 23131.328000, 1265.130036, 2530.260073, X, Y) && !ellipse(25435.564540, 24035.446600, 1156.600033, 1156.600033, 0.000000, X, Y) && !ellipse(24939.241852, 23174.478394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24733.068207, 23845.040558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24648.014343, 25104.352814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25466.578461, 25517.241730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.997345, 24283.672638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26652.237549, 24571.663666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24942.640289, 25617.718658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24081.940857, 23368.473419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26994.492065, 24147.350159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26543.237976, 22490.242828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25980.119537, 25951.862061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24505.433960, 22138.083725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26947.415741, 22741.708618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25950.165497, 21512.965042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25533.352448, 26053.701019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27283.651306, 23188.613770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27002.446533, 25972.826172, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 13:12:32 2012] Writing fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src9.gif
[Fri Jun 15 13:13:30 2012] Mean detx,y = (-54.07, 747.86) 
[Fri Jun 15 13:13:31 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 13:13:40 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 13:13:40 2012] Setting source spectrum file to fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun 15 13:13:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Jun 15 13:21:20 2012] Not generating rmf since there are only 83 counts
[Fri Jun 15 13:21:20 2012] rmf not generated due to insufficient counts
[Fri Jun 15 13:23:35 2012] Updating aperture counts using extracted products
[Fri Jun 15 13:23:35 2012] Error reading totcts from fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun 15 13:23:35 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 13:23:35 2012] Using photon index=1.80, rate=0.00454, arf fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src9.arf
[Fri Jun 15 13:23:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 13:23:35 2012] Updating source flux to 4.5e-14
[Fri Jun 15 13:24:43 2012] Flag b found in src. 9 procflags, skipping spectral fitting
[Fri Jun 15 13:24:43 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting