[Thu Jun 14 14:27:37 2012] Detection parameters:
  Position = (293.0, 277.0) = 16 4 56.48 23 56 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 669.8 +/- 34.6
  Background counts = 58.7
  Rate = 0.03 +/- 0.002

[Thu Jun 14 14:27:38 2012] Off-axis axis estimate = 1.60'
[Thu Jun 14 17:12:22 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 17:12:22 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Thu Jun 14 17:12:22 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.856
[Thu Jun 14 17:12:22 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.23"
[Thu Jun 14 18:27:40 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 14 18:27:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 18:27:40 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 14 18:27:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 18:27:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 18:27:41 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 14 18:27:41 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 14 18:27:41 2012] Fit fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 14 18:28:05 2012] Spatial fit model total counts = 2621.360000, observed total counts = 2399.000000
[Thu Jun 14 18:28:05 2012] Offset between fit and detection position for source 7 = 0.229404 pixels
[Thu Jun 14 18:28:05 2012] 2616.562000 total counts/ 2010.780000 bgd. counts: snr = 13.509339
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.229404 pixels
  Position = (292.9, 276.8) = 16 4 56.51 23 56 2.4
  Extent = 14.5 (14.4-28.9)", rotation angle = 0
  Source counts = 605.8 +/- 51.2
  Background counts = 2010.8
  Rate = 0.03 +/- 0.003
[Thu Jun 14 18:28:05 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 18:28:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 18:28:05 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 18:28:05 2012] Source does appear to be extended
[Thu Jun 14 18:28:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 18:28:05 2012] Source is confused with source 8
[Thu Jun 14 21:08:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 21:08:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 21:08:59 2012] Initial guess for spatial extent in simple fitting = 14.46"
[Thu Jun 14 21:08:59 2012] source mask rpix=3.3, npix_max = 58, mask sum = 58, frac = 0.992
[Thu Jun 14 21:08:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.46"
[Thu Jun 14 22:08:08 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 14 22:08:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src1.csv
[Thu Jun 14 22:08:08 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 14 22:08:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src1.csv
[Thu Jun 14 22:08:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 22:08:08 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 14 22:08:08 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 14 22:08:08 2012] Fit fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 14 22:08:28 2012] Warning, spatial fit 1 centroid is now closest to src. 5
[Thu Jun 14 22:08:28 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 22:08:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 22:08:28 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 22:08:28 2012] Source does appear to be extended
[Thu Jun 14 22:08:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 13:12:32 2012] XMMSAS src. selection expression = ellipse(25435.564540, 24035.446600, 867.450025, 867.450025, 0.000000, X, Y)
[Fri Jun 15 13:12:32 2012] Writing source region out to fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src7_src.reg
[Fri Jun 15 13:12:32 2012] Extracting stamp from image fullrun_mos2_xmm0093060401_pi300-10000_cl_sm2.00.img.gz, (243, 227) - (343, 327)
[Fri Jun 15 13:12:32 2012] XMMSAS bgd. selection expression = annulus(25435.564540, 24035.446600, 1445.750042, 2891.500083, X, Y) && !ellipse(24939.241852, 23174.478394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24733.068207, 23845.040558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25943.138000, 23131.328000, 1012.104029, 1012.104029, 0.000000, X, Y) && !ellipse(24648.014343, 25104.352814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25466.578461, 25517.241730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.997345, 24283.672638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26652.237549, 24571.663666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24942.640289, 25617.718658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24081.940857, 23368.473419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26994.492065, 24147.350159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26543.237976, 22490.242828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25980.119537, 25951.862061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24505.433960, 22138.083725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26947.415741, 22741.708618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25950.165497, 21512.965042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25533.352448, 26053.701019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27283.651306, 23188.613770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27002.446533, 25972.826172, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 13:12:32 2012] Writing fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src7.gif
[Fri Jun 15 13:12:35 2012] Mean detx,y = (-59.54, -180.10) 
[Fri Jun 15 13:12:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 13:12:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 13:12:45 2012] Setting source spectrum file to fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jun 15 13:12:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Jun 15 13:23:35 2012] Updating aperture counts using extracted products
[Fri Jun 15 13:23:35 2012] Error reading totcts from fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jun 15 13:23:35 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 13:23:35 2012] Using photon index=1.80, rate=0.0331, arf fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src7.arf
[Fri Jun 15 13:23:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 13:23:35 2012] Updating source flux to 3.5e-13
[Fri Jun 15 13:24:43 2012] Flag c found in src. 7 procflags, skipping spectral fitting
[Fri Jun 15 13:24:52 2012] Reading fit data from xmm0093060401/analysis//spectral/fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src7_pl.csv
[Fri Jun 15 13:24:52 2012] Spectral fit parameter nH value = 3.06494e+21
[Fri Jun 15 13:24:52 2012] Spectral fit parameter PhoIndex value = 2.75798
[Fri Jun 15 13:24:52 2012] Failed to get F(0.3-8.0) from xmm0093060401/analysis//spectral/fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Fri Jun 15 13:24:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 13:24:52 2012] Using Nh = 3.1e+21, photon index=2.76, rate=0.0331, arf fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src7.arf
[Fri Jun 15 13:24:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 13:24:52 2012] Updating source flux to 3e-13