[Thu Jun 14 14:27:38 2012] Detection parameters:
  Position = (298.8, 247.8) = 16 4 54.63 23 54 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.5 +/- 11.8
  Background counts = 46.0
  Rate = 0.004 +/- 0.0007

[Thu Jun 14 14:27:38 2012] Off-axis axis estimate = 3.67'
[Thu Jun 14 17:12:22 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 17:12:22 2012] Initial guess for spatial extent in simple fitting = 8.26"
[Thu Jun 14 17:12:22 2012] source mask rpix=1.9, npix_max = 23, mask sum = 23, frac = 0.999
[Thu Jun 14 17:12:22 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 8.26"
[Thu Jun 14 18:27:41 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src21.ximg exists
[Thu Jun 14 18:27:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src21.csv
[Thu Jun 14 18:27:41 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Jun 14 18:27:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src21.csv
[Thu Jun 14 18:27:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 18:27:41 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Jun 14 18:27:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun 14 18:27:41 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Jun 14 18:27:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun 14 18:27:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 18:28:05 2012] Source 28 is offset by 0.238904 and -2.888392 pixels which is larger than
2 X fitted extent = 0.758377 x 0.758377, not incorporating fit results
[Thu Jun 14 18:28:05 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 18:28:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 18:28:05 2012] Assessing source extent using major
[Thu Jun 14 18:28:05 2012] Source does appear to be extended
[Thu Jun 14 18:28:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 21:08:59 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 21:08:59 2012] Initial guess for spatial extent in simple fitting = 8.26"
[Thu Jun 14 21:08:59 2012] source mask rpix=1.9, npix_max = 23, mask sum = 23, frac = 0.999
[Thu Jun 14 21:08:59 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 8.26"
[Thu Jun 14 22:08:08 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src20.ximg exists
[Thu Jun 14 22:08:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src20.csv
[Thu Jun 14 22:08:08 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Jun 14 22:08:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src20.csv
[Thu Jun 14 22:08:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 22:08:09 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Jun 14 22:08:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Jun 14 22:08:09 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Jun 14 22:08:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Jun 14 22:08:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 22:08:28 2012] Source 28 is offset by -0.225031 and -1.527806 pixels which is larger than
2 X fitted extent = 0.968276 x 0.968276, not incorporating fit results
[Thu Jun 14 22:08:28 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 22:08:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 22:08:28 2012] Assessing source extent using major
[Thu Jun 14 22:08:28 2012] Source does appear to be extended
[Thu Jun 14 22:08:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 13:12:33 2012] XMMSAS src. selection expression = ellipse(25950.165497, 21512.965042, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 13:12:33 2012] Writing source region out to fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src28_src.reg
[Fri Jun 15 13:12:33 2012] Extracting stamp from image fullrun_mos2_xmm0093060401_pi300-10000_cl_sm2.00.img.gz, (261, 210) - (336, 285)
[Fri Jun 15 13:12:33 2012] XMMSAS bgd. selection expression = annulus(25950.165497, 21512.965042, 1087.500000, 2175.000000, X, Y) && !ellipse(25435.564540, 24035.446600, 1156.600033, 1156.600033, 0.000000, X, Y) && !ellipse(24939.241852, 23174.478394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24733.068207, 23845.040558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25943.138000, 23131.328000, 1012.104029, 1012.104029, 0.000000, X, Y) && !ellipse(24528.997345, 24283.672638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24081.940857, 23368.473419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26994.492065, 24147.350159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26543.237976, 22490.242828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24505.433960, 22138.083725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26947.415741, 22741.708618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27283.651306, 23188.613770, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 13:12:33 2012] Writing fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src28.gif
[Fri Jun 15 13:16:10 2012] Mean detx,y = (-834.68, 2246.66) 
[Fri Jun 15 13:16:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 13:16:20 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 13:16:20 2012] Setting source spectrum file to fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri Jun 15 13:16:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Fri Jun 15 13:22:45 2012] Not generating rmf since there are only 58 counts
[Fri Jun 15 13:22:45 2012] rmf not generated due to insufficient counts
[Fri Jun 15 13:23:35 2012] Updating aperture counts using extracted products
[Fri Jun 15 13:23:35 2012] Error reading totcts from fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri Jun 15 13:23:35 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 13:23:35 2012] Using photon index=1.80, rate=0.00369, arf fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src28.arf
[Fri Jun 15 13:23:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 13:23:35 2012] Updating source flux to 4e-14
[Fri Jun 15 13:24:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting