[Thu Jun 14 14:27:38 2012] Detection parameters:
  Position = (299.2, 298.9) = 16 4 54.52 23 57 37.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.9 +/- 16.5
  Background counts = 52.0
  Rate = 0.004 +/- 0.0008

[Thu Jun 14 14:27:38 2012] Off-axis axis estimate = 0.06'
[Thu Jun 14 17:12:22 2012] Using EEF radius (= 6.46 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 17:12:22 2012] Initial guess for spatial extent in simple fitting = 6.46"
[Thu Jun 14 17:12:22 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.015
[Thu Jun 14 17:12:22 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 6.46"
[Thu Jun 14 18:27:41 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src16.ximg exists
[Thu Jun 14 18:27:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src16.csv
[Thu Jun 14 18:27:41 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src16_1.ximg exists
[Thu Jun 14 18:27:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src16.csv
[Thu Jun 14 18:27:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 18:27:41 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Thu Jun 14 18:27:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src16.csv
[Thu Jun 14 18:27:41 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Thu Jun 14 18:27:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src16.csv
[Thu Jun 14 18:27:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 18:28:05 2012] Source 15 is offset by 0.614615 and 0.806851 pixels which is larger than
2 X fitted extent = 0.769582 x 0.769582, not incorporating fit results
[Thu Jun 14 18:28:05 2012] Warning, spatial fit 16 centroid is now closest to src. 13
[Thu Jun 14 18:28:05 2012] Source 15 is offset by -5.597982 and 2.612414 pixels which is larger than
2 X fitted extent = 0.791044 x 0.791044, not incorporating fit results
[Thu Jun 14 18:28:05 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 18:28:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 18:28:05 2012] Assessing source extent using major
[Thu Jun 14 18:28:05 2012] Source does appear to be extended
[Thu Jun 14 18:28:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 18:28:05 2012] Source is confused with source 16
[Thu Jun 14 21:08:59 2012] Using EEF radius (= 6.46 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 21:08:59 2012] Initial guess for spatial extent in simple fitting = 6.46"
[Thu Jun 14 21:08:59 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.015
[Thu Jun 14 21:08:59 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 6.46"
[Thu Jun 14 22:08:08 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src16.ximg exists
[Thu Jun 14 22:08:08 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Jun 14 22:08:08 2012] Fit fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_src16 appears to have run properly
[Thu Jun 14 22:08:09 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Jun 14 22:08:09 2012] fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Jun 14 22:08:09 2012] Fit fullrun_mos2_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Thu Jun 14 22:08:28 2012] Warning, spatial fit 16 centroid is now closest to src. 2
[Thu Jun 14 22:08:28 2012] Source 15 is offset by -5.559660 and 2.647610 pixels which is larger than
2 X fitted extent = 0.791044 x 0.791044, not incorporating fit results
[Thu Jun 14 22:08:28 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 22:08:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 22:08:28 2012] Assessing source extent using major
[Thu Jun 14 22:08:28 2012] Source does appear to be extended
[Thu Jun 14 22:08:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 13:12:33 2012] XMMSAS src. selection expression = ellipse(25980.119537, 25951.862061, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 13:12:33 2012] Writing source region out to fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src15_src.reg
[Fri Jun 15 13:12:33 2012] Extracting stamp from image fullrun_mos2_xmm0093060401_pi300-10000_cl_sm2.00.img.gz, (262, 261) - (337, 336)
[Fri Jun 15 13:12:33 2012] XMMSAS bgd. selection expression = annulus(25980.119537, 25951.862061, 1087.500000, 2175.000000, X, Y) && !ellipse(25435.564540, 24035.446600, 1156.600033, 1156.600033, 0.000000, X, Y) && !ellipse(24939.241852, 23174.478394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24733.068207, 23845.040558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25943.138000, 23131.328000, 1012.104029, 1012.104029, 0.000000, X, Y) && !ellipse(24648.014343, 25104.352814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25466.578461, 25517.241730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.997345, 24283.672638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26652.237549, 24571.663666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24942.640289, 25617.718658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24081.940857, 23368.473419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26994.492065, 24147.350159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25533.352448, 26053.701019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27283.651306, 23188.613770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27002.446533, 25972.826172, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 13:12:33 2012] Writing fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src15.gif
[Fri Jun 15 13:15:38 2012] Mean detx,y = (1191.82, -1610.41) 
[Fri Jun 15 13:15:38 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 13:15:46 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 13:15:46 2012] Setting source spectrum file to fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jun 15 13:15:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri Jun 15 13:22:32 2012] Not generating rmf since there are only 89 counts
[Fri Jun 15 13:22:32 2012] rmf not generated due to insufficient counts
[Fri Jun 15 13:23:35 2012] Updating aperture counts using extracted products
[Fri Jun 15 13:23:35 2012] Error reading totcts from fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jun 15 13:23:35 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 13:23:35 2012] Using photon index=1.80, rate=0.00442, arf fullrun_mos2_xmm0093060401_pi300-10000_pass1_cl_src15.arf
[Fri Jun 15 13:23:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 13:23:35 2012] Updating source flux to 4.9e-14
[Fri Jun 15 13:24:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting