[Thu Jun 14 14:27:12 2012] Detection parameters:
  Position = (312.3, 259.6) = 16 4 50.37 23 54 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.1 +/- 13.5
  Background counts = 43.6
  Rate = 0.004 +/- 0.0007

[Thu Jun 14 14:27:13 2012] Off-axis axis estimate = 2.99'
[Thu Jun 14 15:59:56 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:59:56 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Thu Jun 14 15:59:56 2012] source mask rpix=1.8, npix_max = 21, mask sum = 24, frac = 1.114
[Thu Jun 14 15:59:56 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.92"
[Thu Jun 14 17:12:22 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src20.ximg exists
[Thu Jun 14 17:12:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src20.csv
[Thu Jun 14 17:12:22 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu Jun 14 17:12:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src20.csv
[Thu Jun 14 17:12:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 17:12:22 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu Jun 14 17:12:22 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Jun 14 17:12:22 2012] Fit fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Thu Jun 14 18:27:59 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 11.258534 pixels away
[Thu Jun 14 18:27:59 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 18:27:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 18:27:59 2012] Assessing source extent using major
[Thu Jun 14 18:27:59 2012] Source does appear to be extended
[Thu Jun 14 18:27:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:05:45 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 20:05:45 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Thu Jun 14 20:05:45 2012] source mask rpix=1.8, npix_max = 21, mask sum = 24, frac = 1.114
[Thu Jun 14 20:05:45 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 7.92"
[Thu Jun 14 21:08:58 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src15.ximg exists
[Thu Jun 14 21:08:58 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu Jun 14 21:08:58 2012] Fit fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src15 appears to have run properly
[Thu Jun 14 21:08:59 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu Jun 14 21:08:59 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Jun 14 21:08:59 2012] Fit fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Thu Jun 14 22:08:23 2012] Source 24 is offset by 5.977169 and -4.090573 pixels which is larger than
2 X fitted extent = 1.660069 x 1.660069, not incorporating fit results
[Thu Jun 14 22:08:23 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 11.269891 pixels away
[Thu Jun 14 22:08:23 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 22:08:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 22:08:23 2012] Assessing source extent using major
[Thu Jun 14 22:08:23 2012] Source does appear to be extended
[Thu Jun 14 22:08:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 10:47:51 2012] XMMSAS src. selection expression = ellipse(27117.921722, 22539.212189, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 10:47:51 2012] Writing source region out to fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src24_src.reg
[Fri Jun 15 10:47:51 2012] Extracting stamp from image fullrun_mos1_xmm0093060401_pi300-10000_cl_sm2.00.img.gz, (275, 222) - (350, 297)
[Fri Jun 15 10:47:51 2012] XMMSAS bgd. selection expression = annulus(27117.921722, 22539.212189, 1087.500000, 2175.000000, X, Y) && !ellipse(25412.832600, 23954.440000, 2001.272058, 2001.272058, 0.000000, X, Y) && !ellipse(25419.298000, 23624.824000, 1236.648036, 1236.648036, 0.000000, X, Y) && !ellipse(25642.346000, 24322.752000, 1124.960032, 1124.960032, 0.000000, X, Y) && !ellipse(25518.518799, 25072.688934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24360.319000, 23908.355000, 867.928025, 867.928025, 0.000000, X, Y) && !ellipse(24517.078918, 23007.028351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24697.038000, 25437.638000, 1133.464033, 1133.464033, 0.000000, X, Y) && !ellipse(25073.655365, 22407.652832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24594.149109, 22226.181580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24090.938751, 24477.508362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23990.260000, 26125.366000, 2266.928065, 2266.928065, 0.000000, X, Y) && !ellipse(24525.049316, 21773.033127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27041.863098, 25424.857330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25640.554565, 21328.882568, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 10:47:51 2012] Writing fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src24.gif
[Fri Jun 15 11:00:46 2012] Mean detx,y = (2109.25, -827.35) 
[Fri Jun 15 11:00:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 11:00:56 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 11:00:56 2012] Setting source spectrum file to fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri Jun 15 11:00:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Fri Jun 15 12:49:28 2012] Not generating rmf since there are only 69 counts
[Fri Jun 15 12:49:28 2012] rmf not generated due to insufficient counts
[Fri Jun 15 13:23:34 2012] Updating aperture counts using extracted products
[Fri Jun 15 13:23:34 2012] Error reading totcts from fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri Jun 15 13:23:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 13:23:34 2012] Using photon index=1.80, rate=0.00367, arf fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src24.arf
[Fri Jun 15 13:23:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 13:23:34 2012] Updating source flux to 3.9e-14
[Fri Jun 15 13:23:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting