[Thu Jun 14 14:27:12 2012] Detection parameters:
  Position = (320.5, 293.6) = 16 4 47.75 23 57 15.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.1 +/- 13.0
  Background counts = 39.1
  Rate = 0.003 +/- 0.0007

[Thu Jun 14 14:27:13 2012] Off-axis axis estimate = 1.64'
[Thu Jun 14 15:59:56 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:59:56 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Thu Jun 14 15:59:56 2012] source mask rpix=1.7, npix_max = 18, mask sum = 25, frac = 1.332
[Thu Jun 14 15:59:56 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.25"
[Thu Jun 14 17:12:22 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src25.ximg exists
[Thu Jun 14 17:12:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src25.csv
[Thu Jun 14 17:12:22 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Jun 14 17:12:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src25.csv
[Thu Jun 14 17:12:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 17:12:22 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Jun 14 17:12:22 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Jun 14 17:12:22 2012] Fit fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Thu Jun 14 18:27:59 2012] Source 19 is offset by 3.772957 and 6.029232 pixels which is larger than
2 X fitted extent = 0.861136 x 0.861136, not incorporating fit results
[Thu Jun 14 18:27:59 2012] Source 19 is offset by -5.710330 and -1.833115 pixels which is larger than
2 X fitted extent = 0.833099 x 0.833099, not incorporating fit results
[Thu Jun 14 18:27:59 2012] Source 19 is offset by 0.532406 and 2.240933 pixels which is larger than
2 X fitted extent = 0.861632 x 0.861632, not incorporating fit results
[Thu Jun 14 18:27:59 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 18:27:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 18:27:59 2012] Assessing source extent using major
[Thu Jun 14 18:27:59 2012] Source does appear to be extended
[Thu Jun 14 18:27:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:05:45 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 20:05:45 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Thu Jun 14 20:05:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 25, frac = 1.332
[Thu Jun 14 20:05:45 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 7.25"
[Thu Jun 14 21:08:58 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src19.ximg exists
[Thu Jun 14 21:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src19.csv
[Thu Jun 14 21:08:58 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Jun 14 21:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src19.csv
[Thu Jun 14 21:08:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 21:08:59 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Jun 14 21:08:59 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Jun 14 21:08:59 2012] Fit fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Jun 14 22:08:23 2012] Spatial fit model total counts = 449.002000, observed total counts = 449.000000
[Thu Jun 14 22:08:23 2012] Offset between fit and detection position for source 19 = 0.467670 pixels
[Thu Jun 14 22:08:23 2012] 425.708400 total counts/ 400.718000 bgd. counts: snr = 1.248400
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.467670 pixels
  Position = (320.9, 293.8) = 16 4 47.62 23 57 16.4
  Extent = 6.1 (1.9-9.9)", rotation angle = 0
  Source counts = 25.0 +/- 20.6
  Background counts = 400.7
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability