[Thu Jun 14 14:27:12 2012] Detection parameters:
  Position = (295.0, 296.9) = 16 4 55.84 23 57 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.0 +/- 16.5
  Background counts = 49.9
  Rate = 0.005 +/- 0.0008

[Thu Jun 14 14:27:13 2012] Off-axis axis estimate = 0.27'
[Thu Jun 14 15:59:56 2012] Using EEF radius (= 6.56 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:59:56 2012] Initial guess for spatial extent in simple fitting = 6.56"
[Thu Jun 14 15:59:56 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.991
[Thu Jun 14 15:59:56 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 6.56"
[Thu Jun 14 17:12:21 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src13.ximg exists
[Thu Jun 14 17:12:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src13.csv
[Thu Jun 14 17:12:21 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Jun 14 17:12:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src13.csv
[Thu Jun 14 17:12:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 17:12:22 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Jun 14 17:12:22 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Jun 14 17:12:22 2012] Fit fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Jun 14 18:27:59 2012] Warning, spatial fit 13 centroid is now closest to src. 13
[Thu Jun 14 18:27:59 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 18:27:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 18:27:59 2012] Assessing source extent using major
[Thu Jun 14 18:27:59 2012] Source does appear to be extended
[Thu Jun 14 18:27:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:05:45 2012] Using EEF radius (= 6.56 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 20:05:45 2012] Initial guess for spatial extent in simple fitting = 6.56"
[Thu Jun 14 20:05:45 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.991
[Thu Jun 14 20:05:45 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 6.56"
[Thu Jun 14 21:08:58 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jun 14 21:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src11.csv
[Thu Jun 14 21:08:58 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jun 14 21:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src11.csv
[Thu Jun 14 21:08:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 21:08:58 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jun 14 21:08:58 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jun 14 21:08:58 2012] Fit fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Jun 14 22:08:23 2012] Source 16 is offset by -3.659200 and -5.953106 pixels which is larger than
2 X fitted extent = 3.979701 x 3.979701, not incorporating fit results
[Thu Jun 14 22:08:23 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 22:08:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 22:08:23 2012] Assessing source extent using major
[Thu Jun 14 22:08:23 2012] Source does appear to be extended
[Thu Jun 14 22:08:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 22:08:23 2012] Source is confused with source 14
[Fri Jun 15 10:47:51 2012] XMMSAS src. selection expression = ellipse(25620.081635, 25780.357788, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 10:47:51 2012] Writing source region out to fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src16_src.reg
[Fri Jun 15 10:47:51 2012] Extracting stamp from image fullrun_mos1_xmm0093060401_pi300-10000_cl_sm2.00.img.gz, (258, 259) - (333, 334)
[Fri Jun 15 10:47:51 2012] XMMSAS bgd. selection expression = annulus(25620.081635, 25780.357788, 1087.500000, 2175.000000, X, Y) && !ellipse(25412.832600, 23954.440000, 2001.272058, 2001.272058, 0.000000, X, Y) && !ellipse(25419.298000, 23624.824000, 1236.648036, 1236.648036, 0.000000, X, Y) && !ellipse(25642.346000, 24322.752000, 1124.960032, 1124.960032, 0.000000, X, Y) && !ellipse(25518.518799, 25072.688934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24360.319000, 23908.355000, 867.928025, 867.928025, 0.000000, X, Y) && !ellipse(24517.078918, 23007.028351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24697.038000, 25437.638000, 1133.464033, 1133.464033, 0.000000, X, Y) && !ellipse(26439.827240, 25784.104034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24090.938751, 24477.508362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23990.260000, 26125.366000, 2266.928065, 2266.928065, 0.000000, X, Y) && !ellipse(27041.863098, 25424.857330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24999.476501, 26726.960693, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 10:47:51 2012] Writing fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src16.gif
[Fri Jun 15 10:59:58 2012] Mean detx,y = (-1376.24, -1007.84) 
[Fri Jun 15 10:59:59 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 11:00:08 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 11:00:08 2012] Setting source spectrum file to fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jun 15 11:00:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Jun 15 12:49:07 2012] Not generating rmf since there are only 88 counts
[Fri Jun 15 12:49:07 2012] rmf not generated due to insufficient counts
[Fri Jun 15 13:23:34 2012] Updating aperture counts using extracted products
[Fri Jun 15 13:23:34 2012] Error reading totcts from fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jun 15 13:23:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 13:23:34 2012] Using photon index=1.80, rate=0.00456, arf fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src16.arf
[Fri Jun 15 13:23:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 13:23:34 2012] Updating source flux to 4.7e-14
[Fri Jun 15 13:23:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting