[Thu Jun 14 14:27:12 2012] Detection parameters:
  Position = (287.9, 307.8) = 16 4 58.10 23 58 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.3 +/- 13.4
  Background counts = 46.6
  Rate = 0.003 +/- 0.0007

[Thu Jun 14 14:27:13 2012] Off-axis axis estimate = 1.02'
[Thu Jun 14 15:59:56 2012] Using EEF radius (= 6.94 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:59:56 2012] Initial guess for spatial extent in simple fitting = 6.94"
[Thu Jun 14 15:59:56 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.911
[Thu Jun 14 15:59:56 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 6.94"
[Thu Jun 14 17:12:22 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src27.ximg exists
[Thu Jun 14 17:12:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src27.csv
[Thu Jun 14 17:12:22 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu Jun 14 17:12:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src27.csv
[Thu Jun 14 17:12:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 17:12:22 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu Jun 14 17:12:22 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Jun 14 17:12:22 2012] Fit fullrun_mos1_xmm0093060401_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Thu Jun 14 18:27:59 2012] Warning, spatial fit 27 centroid is now closest to src. 14
[Thu Jun 14 18:27:59 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 18:27:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 18:27:59 2012] Assessing source extent using major
[Thu Jun 14 18:27:59 2012] Source does appear to be extended
[Thu Jun 14 18:27:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:05:45 2012] Using EEF radius (= 6.94 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 20:05:45 2012] Initial guess for spatial extent in simple fitting = 6.94"
[Thu Jun 14 20:05:45 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.911
[Thu Jun 14 20:05:45 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 6.94"
[Thu Jun 14 21:08:58 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src21.ximg exists
[Thu Jun 14 21:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src21.csv
[Thu Jun 14 21:08:58 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Jun 14 21:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src21.csv
[Thu Jun 14 21:08:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 21:08:59 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Jun 14 21:08:59 2012] fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Jun 14 21:08:59 2012] Fit fullrun_mos1_xmm0093060401_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Thu Jun 14 22:08:23 2012] Source 12 is offset by -6.472431 and -5.811348 pixels which is larger than
2 X fitted extent = 1.005982 x 1.005982, not incorporating fit results
[Thu Jun 14 22:08:23 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 22:08:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 22:08:23 2012] Assessing source extent using major
[Thu Jun 14 22:08:23 2012] Source does appear to be extended
[Thu Jun 14 22:08:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 22:08:23 2012] Source is confused with source 14
[Fri Jun 15 10:47:51 2012] XMMSAS src. selection expression = ellipse(24999.476501, 26726.960693, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 10:47:51 2012] Writing source region out to fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src12_src.reg
[Fri Jun 15 10:47:51 2012] Extracting stamp from image fullrun_mos1_xmm0093060401_pi300-10000_cl_sm2.00.img.gz, (250, 270) - (325, 345)
[Fri Jun 15 10:47:51 2012] XMMSAS bgd. selection expression = annulus(24999.476501, 26726.960693, 1087.500000, 2175.000000, X, Y) && !ellipse(25412.832600, 23954.440000, 2001.272058, 2001.272058, 0.000000, X, Y) && !ellipse(25419.298000, 23624.824000, 1236.648036, 1236.648036, 0.000000, X, Y) && !ellipse(25642.346000, 24322.752000, 1124.960032, 1124.960032, 0.000000, X, Y) && !ellipse(25518.518799, 25072.688934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24360.319000, 23908.355000, 867.928025, 867.928025, 0.000000, X, Y) && !ellipse(24697.038000, 25437.638000, 1133.464033, 1133.464033, 0.000000, X, Y) && !ellipse(25620.081635, 25780.357788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.827240, 25784.104034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24090.938751, 24477.508362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23990.260000, 26125.366000, 2266.928065, 2266.928065, 0.000000, X, Y) && !ellipse(27041.863098, 25424.857330, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 10:47:51 2012] Writing fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src12.gif
[Fri Jun 15 11:02:33 2012] Mean detx,y = (-2506.21, -887.33) 
[Fri Jun 15 11:02:34 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 11:02:43 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 11:02:43 2012] Setting source spectrum file to fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jun 15 11:02:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Jun 15 13:12:27 2012] Not generating rmf since there are only 54 counts
[Fri Jun 15 13:12:27 2012] rmf not generated due to insufficient counts
[Fri Jun 15 13:23:34 2012] Updating aperture counts using extracted products
[Fri Jun 15 13:23:34 2012] Error reading totcts from fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jun 15 13:23:35 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 13:23:35 2012] Using photon index=1.80, rate=0.00287, arf fullrun_mos1_xmm0093060401_pi300-10000_pass1_cl_src12.arf
[Fri Jun 15 13:23:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 13:23:35 2012] Updating source flux to 3e-14
[Fri Jun 15 13:23:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting