[Sun May 19 01:34:59 2013] Detection parameters:
  Position = (132.7, 329.2) = 17 23 24.12 32 11 49.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.8 +/- 6.8
  Background counts = 0.8
  Rate = 0.02 +/- 0.004

[Sun May 19 01:35:00 2013] Off-axis axis estimate = 12.22'
[Sun May 19 01:36:44 2013] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Sun May 19 01:36:44 2013] Initial guess for spatial extent in simple fitting = 12.54"
[Sun May 19 01:36:44 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.071
[Sun May 19 01:36:44 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 12.54"
[Sun May 19 02:32:27 2013] fullrun_pn_xmm0093031601_pi300-10000_cl_pass0_src3.ximg exists
[Sun May 19 02:32:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093031601_pi300-10000_cl_pass0_src3.csv
[Sun May 19 02:32:27 2013] fullrun_pn_xmm0093031601_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May 19 02:32:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093031601_pi300-10000_cl_pass0_src3.csv
[Sun May 19 02:32:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093031601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093031601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 02:32:28 2013] fullrun_pn_xmm0093031601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May 19 02:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093031601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 19 02:32:28 2013] fullrun_pn_xmm0093031601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May 19 02:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093031601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 19 02:32:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093031601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093031601_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 02:35:32 2013] Warning, spatial fit 3 centroid is now closest to src. 6
[Sun May 19 02:35:32 2013] Vigneting correction estimate = 1.000000
[Sun May 19 02:35:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 02:35:32 2013] Assessing source extent using major
[Sun May 19 02:35:32 2013] Source does appear to be extended
[Sun May 19 02:35:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 02:35:32 2013] Source is confused with source 5
[Sun May 19 02:35:32 2013] Source is confused with source 6
[Sun May 19 02:35:42 2013] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Sun May 19 02:35:42 2013] Initial guess for spatial extent in simple fitting = 12.54"
[Sun May 19 02:35:42 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.071
[Sun May 19 02:35:42 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 12.54"
[Sun May 19 03:40:03 2013] fullrun_pn_xmm0093031601_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 19 03:40:03 2013] fullrun_pn_xmm0093031601_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 19 03:40:03 2013] Fit fullrun_pn_xmm0093031601_pi300-10000_cl_pass1_src3 appears to have run properly
[Sun May 19 03:40:03 2013] fullrun_pn_xmm0093031601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 19 03:40:03 2013] fullrun_pn_xmm0093031601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 19 03:40:03 2013] Fit fullrun_pn_xmm0093031601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun May 19 03:43:09 2013] Spatial fit model total counts = 92.744000, observed total counts = 87.000000
[Sun May 19 03:43:09 2013] Offset between fit and detection position for source 4 = 1.304094 pixels
[Sun May 19 03:43:09 2013] 81.493800 total counts/ 38.732300 bgd. counts: snr = 6.870942
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.304094 pixels
  Position = (131.8, 330.1) = 17 23 24.44 32 11 53.3
  Extent = 13.2 (10.6-16.4)", rotation angle = 0
  Source counts = 42.8 +/- 9.0
  Background counts = 38.7
  Rate = 0.05 +/- 0.01
[Sun May 19 03:43:09 2013] Vigneting correction estimate = 1.000000
[Sun May 19 03:43:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 03:43:09 2013] Assessing source extent using major axis lower bound
[Sun May 19 03:43:09 2013] Source does appear to be extended
[Sun May 19 03:43:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 03:43:14 2013] XMMSAS src. selection expression = ellipse(11415.652400, 28667.826400, 790.104023, 790.104023, 0.000000, X, Y)
[Sun May 19 03:43:14 2013] Writing source region out to fullrun_pn_xmm0093031601_pi300-10000_pass1_cl_src4_src.reg
[Sun May 19 03:43:14 2013] Extracting stamp from image fullrun_pn_xmm0093031601_pi300-10000_cl_sm2.00.img.gz, (86, 285) - (177, 375)
[Sun May 19 03:43:14 2013] XMMSAS bgd. selection expression = annulus(11415.652400, 28667.826400, 1316.840038, 2633.680076, X, Y) && !ellipse(11209.264954, 29390.247131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12358.544000, 28117.472000, 1351.856039, 1351.856039, 0.000000, X, Y) && !ellipse(12254.751200, 27822.660000, 1502.824043, 1502.824043, 0.000000, X, Y) && !ellipse(11081.711372, 27536.988892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11636.382172, 27202.534851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11204.241638, 26496.551941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10651.179787, 25573.371704, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 03:43:14 2013] Writing fullrun_pn_xmm0093031601_pi300-10000_pass1_cl_src4.gif
[Sun May 19 03:46:06 2013] Mean detx,y = (9303.13, 11989.33) 
[Sun May 19 03:46:10 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 03:46:48 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 03:46:49 2013] Setting source spectrum file to fullrun_pn_xmm0093031601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun May 19 03:46:49 2013] Setting bgd. spectrum file to fullrun_pn_xmm0093031601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun May 19 03:55:28 2013] Not generating rmf since there are only 42 counts
[Sun May 19 03:55:28 2013] rmf not generated due to insufficient counts
[Sun May 19 04:04:44 2013] Updating aperture counts using extracted products
[Sun May 19 04:04:44 2013] Total counts from fullrun_pn_xmm0093031601_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 79.00
[Sun May 19 04:04:44 2013] Total counts from fullrun_pn_xmm0093031601_pi300-10000_pass1_cl_src4_bgd.pi.gz = 5.00
[Sun May 19 04:04:44 2013] Got source and background scale factors 1615296.000000, 2006130.000000
[Sun May 19 04:04:44 2013] User source parameters:
  Position = (131.8, 330.1) = 17 23 24.44 32 11 53.3
  Extent = 13.2 (10.6-16.4)", rotation angle = 0
  Source aperture counts = 75.0 +/- 9.9
  Background aperture counts = 4.0
  Rate = 0.08 +/- 0.01

[Sun May 19 04:04:47 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 04:04:47 2013] Using photon index=1.80, rate=0.0462, arf fullrun_pn_xmm0093031601_pi300-10000_pass1_cl_src4.arf
[Sun May 19 04:04:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 04:04:47 2013] Updating source flux to 3e-13
[Sun May 19 04:04:53 2013] Flag c found in src. 4 procflags, skipping spectral fitting
[Sun May 19 04:04:53 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 19 04:04:54 2013] xmm0093031601/analysis//spectral/fullrun_pn_xmm0093031601_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete