[Wed Jun  6 14:13:53 2012] Detection parameters:
  Position = (317.1, 313.0) = 17 22 27.34 32 7 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1038.3 +/- 42.4
  Background counts = 79.9
  Rate = 0.2 +/- 0.007

[Wed Jun  6 14:13:53 2012] Off-axis axis estimate = 1.71'
[Wed Jun  6 14:30:50 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Jun  6 14:30:50 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Jun  6 14:30:50 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Wed Jun  6 14:30:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Jun  6 14:42:06 2012] fullrun_mos2_xmm0093031501_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun  6 14:42:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031501_pi300-10000_cl_pass0_src1.csv
[Wed Jun  6 14:42:06 2012] fullrun_mos2_xmm0093031501_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun  6 14:42:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031501_pi300-10000_cl_pass0_src1.csv
[Wed Jun  6 14:42:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093031501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093031501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  6 14:42:06 2012] fullrun_mos2_xmm0093031501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun  6 14:42:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun  6 14:42:06 2012] fullrun_mos2_xmm0093031501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun  6 14:42:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun  6 14:42:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093031501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093031501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  6 14:42:09 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Wed Jun  6 14:42:09 2012] Spatial fit model total counts = 1300.800000, observed total counts = 1299.000000
[Wed Jun  6 14:42:09 2012] Offset between fit and detection position for source 1 = 5.713156 pixels
[Wed Jun  6 14:42:09 2012] Warning, changing simple spatial fit ID from 1 to 5
[Wed Jun  6 14:42:09 2012] 1282.744000 total counts/ 1022.810000 bgd. counts: snr = 8.127661
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 5.713156 pixels
  Position = (311.3, 312.9) = 17 22 29.30 32 7 55.5
  Extent = 13.8 (13.8-27.6)", rotation angle = 0
  Source counts = 259.9 +/- 35.8
  Background counts = 1022.8
  Rate = 0.05 +/- 0.007
[Wed Jun  6 14:42:09 2012] Vigneting correction estimate = 1.000000
[Wed Jun  6 14:42:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  6 14:42:09 2012] Assessing source extent using major axis lower bound
[Wed Jun  6 14:42:09 2012] Source does appear to be extended
[Wed Jun  6 14:42:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 14:42:09 2012] Source is confused with source 3
[Wed Jun  6 15:03:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun  6 15:03:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun  6 15:03:13 2012] Initial guess for spatial extent in simple fitting = 13.79"
[Wed Jun  6 15:03:13 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.040
[Wed Jun  6 15:03:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.79"
[Wed Jun  6 15:16:20 2012] fullrun_mos2_xmm0093031501_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun  6 15:16:20 2012] fullrun_mos2_xmm0093031501_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun  6 15:16:20 2012] Fit fullrun_mos2_xmm0093031501_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Jun  6 15:16:20 2012] fullrun_mos2_xmm0093031501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun  6 15:16:20 2012] fullrun_mos2_xmm0093031501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun  6 15:16:20 2012] Fit fullrun_mos2_xmm0093031501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun  6 15:16:24 2012] Spatial fit model total counts = 4914.980000, observed total counts = 4770.000000
[Wed Jun  6 15:16:24 2012] Offset between fit and detection position for source 1 = 5.590213 pixels
[Wed Jun  6 15:16:24 2012] 4877.370000 total counts/ 2770.330000 bgd. counts: snr = 40.031976
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 5.590213 pixels
  Position = (316.9, 312.9) = 17 22 27.39 32 7 55.5
  Extent = 18.8 (16.7-20.2)", rotation angle = 0
  Source counts = 2107.0 +/- 69.8
  Background counts = 2770.3
  Rate = 0.4 +/- 0.01
[Wed Jun  6 15:16:24 2012] Spatial fit model total counts = 1824.490000, observed total counts = 1559.000000
[Wed Jun  6 15:16:24 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun  6 15:16:24 2012] Vigneting correction estimate = 1.000000
[Wed Jun  6 15:16:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  6 15:16:24 2012] Assessing source extent using major axis lower bound
[Wed Jun  6 15:16:24 2012] Source does appear to be extended
[Wed Jun  6 15:16:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 16:16:20 2012] Counts = 2107.040000, rescaling region sizes by 2.000000
[Wed Jun  6 16:16:20 2012] XMMSAS src. selection expression = ellipse(27524.340000, 27175.431800, 2251.176065, 2251.176065, 0.000000, X, Y)
[Wed Jun  6 16:16:20 2012] Writing source region out to fullrun_mos2_xmm0093031501_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun  6 16:16:20 2012] Extracting stamp from image fullrun_mos2_xmm0093031501_pi300-10000_cl_sm2.00.img.gz, (188, 184) - (446, 442)
[Wed Jun  6 16:16:20 2012] XMMSAS bgd. selection expression = annulus(27524.340000, 27175.431800, 7503.920216, 15007.840432, X, Y) && !ellipse(20430.649400, 21378.793400, 378.831211, 378.831211, 0.000000, X, Y) && !ellipse(28303.540985, 26648.183319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28546.858490, 27073.779205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27037.992000, 27225.604000, 1102.984032, 1102.984032, 0.000000, X, Y)
[Wed Jun  6 16:16:20 2012] Writing fullrun_mos2_xmm0093031501_pi300-10000_pass1_cl_src1.gif
[Wed Jun  6 16:16:29 2012] Mean detx,y = (62.81, 90.48) 
[Wed Jun  6 16:16:32 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  6 16:22:27 2012] Binned source spectrum to 10 counts/bin
[Wed Jun  6 16:22:27 2012] Setting source spectrum file to fullrun_mos2_xmm0093031501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun  6 16:22:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093031501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun  6 16:36:00 2012] Updating aperture counts using extracted products
[Wed Jun  6 16:36:00 2012] Error reading totcts from fullrun_mos2_xmm0093031501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun  6 16:36:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 16:36:00 2012] Using photon index=1.80, rate=0.383, arf fullrun_mos2_xmm0093031501_pi300-10000_pass1_cl_src1.arf
[Wed Jun  6 16:36:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 16:36:00 2012] Updating source flux to 3.3e-12
[Wed Jun  6 16:36:50 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed Jun  6 16:36:50 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Jun  6 16:37:24 2012] Reading fit data from xmm0093031501/analysis//spectral/fullrun_mos2_xmm0093031501_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jun  6 16:37:24 2012] Spectral fit parameter nH value = 5.31403e+20
[Wed Jun  6 16:37:24 2012] Spectral fit parameter PhoIndex value = 1.5206
[Wed Jun  6 16:37:24 2012] Failed to get F(0.3-8.0) from xmm0093031501/analysis//spectral/fullrun_mos2_xmm0093031501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jun  6 16:37:24 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 16:37:24 2012] Using Nh = 5.3e+20, photon index=1.52, rate=0.383, arf fullrun_mos2_xmm0093031501_pi300-10000_pass1_cl_src1.arf
[Wed Jun  6 16:37:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 16:37:24 2012] Updating source flux to 4.1e-12