[Wed Jun  6 14:13:36 2012] Detection parameters:
  Position = (317.0, 313.0) = 17 22 27.37 32 7 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1103.6 +/- 43.9
  Background counts = 76.4
  Rate = 0.2 +/- 0.007

[Wed Jun  6 14:13:36 2012] Off-axis axis estimate = 1.71'
[Wed Jun  6 14:21:26 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Jun  6 14:21:26 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Jun  6 14:21:26 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Wed Jun  6 14:21:26 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Jun  6 14:30:50 2012] fullrun_mos1_xmm0093031501_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun  6 14:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093031501_pi300-10000_cl_pass0_src1.csv
[Wed Jun  6 14:30:50 2012] fullrun_mos1_xmm0093031501_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun  6 14:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093031501_pi300-10000_cl_pass0_src1.csv
[Wed Jun  6 14:30:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093031501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093031501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  6 14:30:50 2012] fullrun_mos1_xmm0093031501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun  6 14:30:50 2012] fullrun_mos1_xmm0093031501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun  6 14:30:50 2012] Fit fullrun_mos1_xmm0093031501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun  6 14:42:08 2012] Spatial fit model total counts = 3287.270000, observed total counts = 3286.000000
[Wed Jun  6 14:42:08 2012] Offset between fit and detection position for source 1 = 0.343333 pixels
[Wed Jun  6 14:42:08 2012] 3289.840000 total counts/ 1908.120000 bgd. counts: snr = 31.631312
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.343333 pixels
  Position = (317.2, 313.2) = 17 22 27.28 32 7 56.8
  Extent = 14.5 (14.5-14.6)", rotation angle = 0
  Source counts = 1381.7 +/- 57.4
  Background counts = 1908.1
  Rate = 0.2 +/- 0.01
[Wed Jun  6 14:42:08 2012] Vigneting correction estimate = 1.000000
[Wed Jun  6 14:42:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  6 14:42:08 2012] Assessing source extent using major axis lower bound
[Wed Jun  6 14:42:08 2012] Source does appear to be extended
[Wed Jun  6 14:42:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 14:42:08 2012] Source is confused with source 3
[Wed Jun  6 14:47:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun  6 14:47:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun  6 14:47:22 2012] Initial guess for spatial extent in simple fitting = 14.54"
[Wed Jun  6 14:47:22 2012] source mask rpix=3.3, npix_max = 59, mask sum = 64, frac = 1.083
[Wed Jun  6 14:47:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.54"
[Wed Jun  6 15:03:13 2012] fullrun_mos1_xmm0093031501_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun  6 15:03:13 2012] fullrun_mos1_xmm0093031501_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun  6 15:03:13 2012] Fit fullrun_mos1_xmm0093031501_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Jun  6 15:03:13 2012] fullrun_mos1_xmm0093031501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun  6 15:03:13 2012] fullrun_mos1_xmm0093031501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun  6 15:03:13 2012] Fit fullrun_mos1_xmm0093031501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun  6 15:16:23 2012] Spatial fit model total counts = 6007.510000, observed total counts = 5996.000000
[Wed Jun  6 15:16:23 2012] Offset between fit and detection position for source 1 = 0.244199 pixels
[Wed Jun  6 15:16:23 2012] 6038.910000 total counts/ 4630.800000 bgd. counts: snr = 20.692291
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.244199 pixels
  Position = (317.1, 313.0) = 17 22 27.32 32 7 55.9
  Extent = 12.2" x 12.2", rotation angle = 0
  Source counts = 1408.1 +/- 77.7
  Background counts = 4630.8
  Rate = 0.2 +/- 0.01
[Wed Jun  6 15:16:23 2012] Vigneting correction estimate = 1.000000
[Wed Jun  6 15:16:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  6 15:16:23 2012] Assessing source extent using major
[Wed Jun  6 15:16:23 2012] Source does appear to be extended
[Wed Jun  6 15:16:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 15:27:54 2012] Counts = 1408.110000, rescaling region sizes by 2.000000
[Wed Jun  6 15:27:54 2012] XMMSAS src. selection expression = ellipse(27540.185764, 27184.092628, 1461.000042, 1461.000042, 0.000000, X, Y)
[Wed Jun  6 15:27:54 2012] Writing source region out to fullrun_mos1_xmm0093031501_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun  6 15:27:54 2012] Extracting stamp from image fullrun_mos1_xmm0093031501_pi300-10000_cl_sm2.00.img.gz, (233, 229) - (401, 397)
[Wed Jun  6 15:27:54 2012] XMMSAS bgd. selection expression = annulus(27540.185764, 27184.092628, 4870.000140, 9740.000280, X, Y) && !ellipse(20407.066620, 21401.942600, 612.602418, 361.397610, 98.672971, X, Y) && !ellipse(28250.336853, 27945.096100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27646.780000, 26907.568000, 2195.384063, 1358.664039, 71.676000, X, Y) && !ellipse(20057.839066, 35004.394196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28715.410000, 25453.926000, 1195.152034, 1195.152034, 0.000000, X, Y)
[Wed Jun  6 15:27:54 2012] Writing fullrun_mos1_xmm0093031501_pi300-10000_pass1_cl_src1.gif
[Wed Jun  6 15:28:00 2012] Mean detx,y = (327.31, -195.86) 
[Wed Jun  6 15:28:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  6 15:32:17 2012] Binned source spectrum to 10 counts/bin
[Wed Jun  6 15:32:18 2012] Setting source spectrum file to fullrun_mos1_xmm0093031501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun  6 15:32:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093031501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun  6 16:35:59 2012] Updating aperture counts using extracted products
[Wed Jun  6 16:35:59 2012] Error reading totcts from fullrun_mos1_xmm0093031501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun  6 16:36:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 16:36:00 2012] Using photon index=1.80, rate=0.246, arf fullrun_mos1_xmm0093031501_pi300-10000_pass1_cl_src1.arf
[Wed Jun  6 16:36:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 16:36:00 2012] Updating source flux to 2.1e-12
[Wed Jun  6 16:36:01 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Jun  6 16:36:50 2012] Reading fit data from xmm0093031501/analysis//spectral/fullrun_mos1_xmm0093031501_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jun  6 16:36:50 2012] Spectral fit parameter nH value = 5.75821e+20
[Wed Jun  6 16:36:50 2012] Spectral fit parameter PhoIndex value = 1.78698
[Wed Jun  6 16:36:50 2012] Failed to get F(0.3-8.0) from xmm0093031501/analysis//spectral/fullrun_mos1_xmm0093031501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jun  6 16:36:50 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 16:36:50 2012] Using Nh = 5.8e+20, photon index=1.79, rate=0.246, arf fullrun_mos1_xmm0093031501_pi300-10000_pass1_cl_src1.arf
[Wed Jun  6 16:36:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 16:36:50 2012] Updating source flux to 2.3e-12