[Fri Jun 21 08:42:06 2013] Detection parameters:
  Position = (316.3, 315.0) = 17 22 27.46 32 7 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 760.9 +/- 38.1
  Background counts = 93.5
  Rate = 0.2 +/- 0.008

[Fri Jun 21 08:42:06 2013] Off-axis axis estimate = 1.76'
[Fri Jun 21 08:57:16 2013] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 08:57:16 2013] Initial guess for spatial extent in simple fitting = 7.31"
[Fri Jun 21 08:57:16 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Fri Jun 21 08:57:16 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Fri Jun 21 09:02:03 2013] fullrun_mos2_xmm0093031401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 21 09:02:03 2013] fullrun_mos2_xmm0093031401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 21 09:02:03 2013] Fit fullrun_mos2_xmm0093031401_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Jun 21 09:02:03 2013] fullrun_mos2_xmm0093031401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 21 09:02:03 2013] fullrun_mos2_xmm0093031401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 21 09:02:03 2013] Fit fullrun_mos2_xmm0093031401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 21 09:02:06 2013] Spatial fit model total counts = 1975.190000, observed total counts = 1924.000000
[Fri Jun 21 09:02:06 2013] Offset between fit and detection position for source 1 = 0.195463 pixels
[Fri Jun 21 09:02:06 2013] 1973.149000 total counts/ 1297.970000 bgd. counts: snr = 18.740734
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.195463 pixels
  Position = (316.3, 314.8) = 17 22 27.44 32 7 58.2
  Extent = 12.3 (10.7-14.5)", rotation angle = 0
  Source counts = 675.2 +/- 44.4
  Background counts = 1298.0
  Rate = 0.2 +/- 0.01
[Fri Jun 21 09:02:06 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 09:02:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 09:02:06 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 09:02:06 2013] Source does appear to be extended
[Fri Jun 21 09:02:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 09:13:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 09:13:37 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 21 09:13:37 2013] Initial guess for spatial extent in simple fitting = 12.29"
[Fri Jun 21 09:13:37 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.109
[Fri Jun 21 09:13:37 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 12.29"
[Fri Jun 21 09:19:13 2013] fullrun_mos2_xmm0093031401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 21 09:19:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031401_pi300-10000_cl_pass1_src1.csv
[Fri Jun 21 09:19:13 2013] fullrun_mos2_xmm0093031401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 21 09:19:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031401_pi300-10000_cl_pass1_src1.csv
[Fri Jun 21 09:19:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093031401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093031401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 09:19:13 2013] fullrun_mos2_xmm0093031401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 21 09:19:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 21 09:19:13 2013] fullrun_mos2_xmm0093031401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 21 09:19:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 21 09:19:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093031401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093031401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 09:19:18 2013] Warning, spatial fit 1 centroid is now closest to src. 3
[Fri Jun 21 09:19:18 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 09:19:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 09:19:18 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 09:19:18 2013] Source does appear to be extended
[Fri Jun 21 09:19:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 09:35:11 2013] XMMSAS src. selection expression = ellipse(27469.845000, 27335.884600, 737.142021, 737.142021, 0.000000, X, Y)
[Fri Jun 21 09:35:11 2013] Writing source region out to fullrun_mos2_xmm0093031401_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 21 09:35:11 2013] Extracting stamp from image fullrun_mos2_xmm0093031401_pi300-10000_cl_sm2.00.img.gz, (274, 272) - (359, 357)
[Fri Jun 21 09:35:11 2013] XMMSAS bgd. selection expression = annulus(27469.845000, 27335.884600, 1228.570035, 2457.140071, X, Y) && !ellipse(28211.411469, 26821.262024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27542.877747, 28340.052948, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 09:35:11 2013] Writing fullrun_mos2_xmm0093031401_pi300-10000_pass1_cl_src1.gif
[Fri Jun 21 09:35:14 2013] Mean detx,y = (118.27, 175.31) 
[Fri Jun 21 09:35:15 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 09:35:24 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 09:35:24 2013] Setting source spectrum file to fullrun_mos2_xmm0093031401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 21 09:35:24 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0093031401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 21 09:44:21 2013] Updating aperture counts using extracted products
[Fri Jun 21 09:44:21 2013] Total counts from fullrun_mos2_xmm0093031401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1778.00
[Fri Jun 21 09:44:21 2013] Total counts from fullrun_mos2_xmm0093031401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 3978.00
[Fri Jun 21 09:44:21 2013] Got source and background scale factors 1644764.000000, 11867076.000000
[Fri Jun 21 09:44:21 2013] User source parameters:
  Position = (316.3, 314.8) = 17 22 27.44 32 7 58.2
  Extent = 12.3 (10.7-14.5)", rotation angle = 0
  Source aperture counts = 1226.7 +/- 43.2
  Background aperture counts = 551.3
  Rate = 0.4 +/- 0.01

[Fri Jun 21 09:44:21 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 09:44:21 2013] Using photon index=1.80, rate=0.219, arf fullrun_mos2_xmm0093031401_pi300-10000_pass1_cl_src1.arf
[Fri Jun 21 09:44:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 09:44:21 2013] Updating source flux to 2.3e-12
[Fri Jun 21 09:44:26 2013] xmm0093031401/analysis//spectral/fullrun_mos2_xmm0093031401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete