[Sun Jun  3 20:53:49 2012] Detection parameters:
  Position = (308.2, 320.1) = 17 22 27.40 32 7 56.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1106.8 +/- 42.9
  Background counts = 50.9
  Rate = 0.1 +/- 0.005

[Sun Jun  3 20:53:49 2012] Off-axis axis estimate = 1.72'
[Sun Jun  3 21:09:10 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 21:09:10 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Jun  3 21:09:10 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sun Jun  3 21:09:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Jun  3 21:17:33 2012] fullrun_mos1_xmm0093031101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  3 21:17:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093031101_pi300-10000_cl_pass0_src1.csv
[Sun Jun  3 21:17:33 2012] fullrun_mos1_xmm0093031101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  3 21:17:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0093031101_pi300-10000_cl_pass0_src1.csv
[Sun Jun  3 21:17:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093031101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093031101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 21:17:33 2012] fullrun_mos1_xmm0093031101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  3 21:17:33 2012] fullrun_mos1_xmm0093031101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  3 21:17:33 2012] Fit fullrun_mos1_xmm0093031101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun  3 21:28:23 2012] Spatial fit model total counts = 954.999000, observed total counts = 955.000000
[Sun Jun  3 21:28:23 2012] Offset between fit and detection position for source 1 = 0.414004 pixels
[Sun Jun  3 21:28:23 2012] 960.335000 total counts/ 501.127000 bgd. counts: snr = 20.513301
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.414004 pixels
  Position = (308.6, 320.1) = 17 22 27.26 32 7 55.4
  Extent = 13.8 (12.4-14.6)", rotation angle = 0
  Source counts = 459.2 +/- 31.0
  Background counts = 501.1
  Rate = 0.2 +/- 0.02
[Sun Jun  3 21:28:23 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 21:28:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 21:28:23 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 21:28:23 2012] Source does appear to be extended
[Sun Jun  3 21:28:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 21:39:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  3 21:39:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  3 21:39:20 2012] Initial guess for spatial extent in simple fitting = 13.84"
[Sun Jun  3 21:39:20 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.033
[Sun Jun  3 21:39:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.84"
[Sun Jun  3 21:43:49 2012] fullrun_mos1_xmm0093031101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  3 21:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093031101_pi300-10000_cl_pass1_src1.csv
[Sun Jun  3 21:43:49 2012] fullrun_mos1_xmm0093031101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  3 21:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093031101_pi300-10000_cl_pass1_src1.csv
[Sun Jun  3 21:43:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093031101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093031101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 21:43:49 2012] fullrun_mos1_xmm0093031101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  3 21:43:49 2012] fullrun_mos1_xmm0093031101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  3 21:43:49 2012] Fit fullrun_mos1_xmm0093031101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun  3 21:54:54 2012] Warning, spatial fit 1 centroid is now closest to src. 5
[Sun Jun  3 21:54:54 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 21:54:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 21:54:54 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 21:54:54 2012] Source does appear to be extended
[Sun Jun  3 21:54:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 21:58:46 2012] XMMSAS src. selection expression = ellipse(26797.528200, 27800.344000, 830.184024, 830.184024, 0.000000, X, Y)
[Sun Jun  3 21:58:46 2012] Writing source region out to fullrun_mos1_xmm0093031101_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun  3 21:58:46 2012] Extracting stamp from image fullrun_mos1_xmm0093031101_pi300-10000_cl_sm2.00.img.gz, (261, 272) - (356, 368)
[Sun Jun  3 21:58:46 2012] XMMSAS bgd. selection expression = annulus(26797.528200, 27800.344000, 1383.640040, 2767.280080, X, Y) && !ellipse(25885.473053, 26935.019409, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  3 21:58:46 2012] Writing fullrun_mos1_xmm0093031101_pi300-10000_pass1_cl_src1.gif
[Sun Jun  3 21:58:48 2012] Mean detx,y = (321.72, -180.79) 
[Sun Jun  3 21:58:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 21:58:58 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 21:58:58 2012] Setting source spectrum file to fullrun_mos1_xmm0093031101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun  3 21:58:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093031101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun  3 22:08:25 2012] Updating aperture counts using extracted products
[Sun Jun  3 22:08:25 2012] Error reading totcts from fullrun_mos1_xmm0093031101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun  3 22:08:25 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 22:08:25 2012] Using photon index=1.80, rate=0.225, arf fullrun_mos1_xmm0093031101_pi300-10000_pass1_cl_src1.arf
[Sun Jun  3 22:08:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 22:08:25 2012] Updating source flux to 2.1e-12
[Sun Jun  3 22:08:33 2012] Reading fit data from xmm0093031101/analysis//spectral/fullrun_mos1_xmm0093031101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jun  3 22:08:33 2012] Spectral fit parameter nH value = 1.22884e+21
[Sun Jun  3 22:08:33 2012] Spectral fit parameter PhoIndex value = 2.01683
[Sun Jun  3 22:08:33 2012] Failed to get F(0.3-8.0) from xmm0093031101/analysis//spectral/fullrun_mos1_xmm0093031101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jun  3 22:08:33 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 22:08:33 2012] Using Nh = 1.2e+21, photon index=2.02, rate=0.225, arf fullrun_mos1_xmm0093031101_pi300-10000_pass1_cl_src1.arf
[Sun Jun  3 22:08:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 22:08:33 2012] Updating source flux to 2.1e-12