[Thu Sep  6 22:55:36 2012] Detection parameters:
  Position = (316.2, 322.1) = 17 22 23.67 32 7 55.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183.3 +/- 18.4
  Background counts = 22.6
  Rate = 0.03 +/- 0.003

[Thu Sep  6 22:55:36 2012] Off-axis axis estimate = 2.14'
[Thu Sep  6 23:28:32 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 23:28:32 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Thu Sep  6 23:28:32 2012] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.505
[Thu Sep  6 23:28:32 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.50"
[Thu Sep  6 23:48:43 2012] fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_src2.ximg exists
[Thu Sep  6 23:48:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_src2.csv
[Thu Sep  6 23:48:43 2012] fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Sep  6 23:48:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_src2.csv
[Thu Sep  6 23:48:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 23:48:44 2012] fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Sep  6 23:48:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Sep  6 23:48:44 2012] fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Sep  6 23:48:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Sep  6 23:48:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 23:48:51 2012] Source 9 is offset by 7.072250 and 2.128264 pixels which is larger than
2 X fitted extent = 2.170051 x 4.092841, not incorporating fit results
[Thu Sep  6 23:48:51 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 23:48:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 23:48:51 2012] Assessing source extent using major
[Thu Sep  6 23:48:51 2012] Source does appear to be extended
[Thu Sep  6 23:48:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 00:21:56 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 00:21:56 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Fri Sep  7 00:21:56 2012] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.505
[Fri Sep  7 00:21:56 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.50"
[Fri Sep  7 00:52:31 2012] fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_src2.ximg exists
[Fri Sep  7 00:52:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_src2.csv
[Fri Sep  7 00:52:31 2012] fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Sep  7 00:52:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_src2.csv
[Fri Sep  7 00:52:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 00:52:31 2012] fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Sep  7 00:52:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Sep  7 00:52:31 2012] fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Sep  7 00:52:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Sep  7 00:52:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 00:52:36 2012] Spatial fit model total counts = 1109.350000, observed total counts = 1000.000000
[Fri Sep  7 00:52:36 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Sep  7 00:52:36 2012] Spatial fit model total counts = 414.455000, observed total counts = 414.000000
[Fri Sep  7 00:52:36 2012] Offset between fit and detection position for source 9 = 5.174580 pixels
[Fri Sep  7 00:52:36 2012] Warning, changing simple spatial fit ID from 2 to 9
[Fri Sep  7 00:52:36 2012] 416.725000 total counts/ 196.769000 bgd. counts: snr = 15.680412
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 5.174580 pixels
  Position = (317.1, 317.0) = 17 22 23.34 32 7 34.9
  Extent = 30.0 (27.5-60.0)", rotation angle = 0
  Source counts = 220.0 +/- 20.4
  Background counts = 196.8
  Rate = 0.05 +/- 0.005
[Fri Sep  7 00:52:36 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 00:52:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 00:52:36 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 00:52:36 2012] Source does appear to be extended
[Fri Sep  7 00:52:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 00:52:36 2012] Source is confused with source 1
[Fri Sep  7 00:52:36 2012] Source is confused with source 7
[Fri Sep  7 00:52:36 2012] Source is confused with source 10
[Fri Sep  7 01:05:34 2012] XMMSAS src. selection expression = ellipse(27543.178000, 27530.684000, 1801.200052, 1801.200052, 0.000000, X, Y)
[Fri Sep  7 01:05:34 2012] Writing source region out to fullrun_mos2_xmm0093031001_pi300-10000_pass1_cl_src9_src.reg
[Fri Sep  7 01:05:34 2012] Extracting stamp from image fullrun_mos2_xmm0093031001_pi300-10000_cl_sm2.00.img.gz, (214, 213) - (421, 421)
[Fri Sep  7 01:05:34 2012] XMMSAS bgd. selection expression = annulus(27543.178000, 27530.684000, 3002.000086, 6004.000173, X, Y) && !ellipse(26593.366560, 28001.594800, 1188.584034, 1188.584034, 0.000000, X, Y) && !ellipse(29177.827060, 29473.811800, 417.797612, 417.797612, 0.000000, X, Y) && !ellipse(26142.084000, 28924.596000, 2508.088072, 2508.088072, 0.000000, X, Y) && !ellipse(27524.207581, 28909.909851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28585.420000, 27021.736000, 1200.800035, 1200.800035, 0.000000, X, Y) && !ellipse(24977.062744, 28301.347931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30290.043400, 26544.188600, 668.573890, 668.573890, 0.000000, X, Y) && !ellipse(24972.012000, 30059.230000, 1266.160036, 1266.160036, 0.000000, X, Y) && !ellipse(25935.127411, 26350.389923, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep  7 01:05:34 2012] Writing fullrun_mos2_xmm0093031001_pi300-10000_pass1_cl_src9.gif
[Fri Sep  7 01:08:16 2012] Mean detx,y = (-292.23, -88.18) 
[Fri Sep  7 01:08:16 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 01:08:37 2012] grppha failed
[Fri Sep  7 01:08:37 2012] Setting source spectrum file to fullrun_mos2_xmm0093031001_pi300-10000_pass1_cl_src9_src.pi.gz
[Fri Sep  7 01:08:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093031001_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Sep  7 01:10:47 2012] Updating aperture counts using extracted products
[Fri Sep  7 01:10:47 2012] Error reading totcts from fullrun_mos2_xmm0093031001_pi300-10000_pass1_cl_src9_src.pi.gz
[Fri Sep  7 01:10:47 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 01:10:49 2012] Flag b found in src. 9 procflags, skipping spectral fitting
[Fri Sep  7 01:10:49 2012] Flag p found in src. 9 procflags, skipping spectral fitting
[Fri Sep  7 01:10:49 2012] Flag c found in src. 9 procflags, skipping spectral fitting
[Fri Sep  7 01:10:49 2012] Source 9 has no response, skipping
[Fri Sep  7 01:10:50 2012] xmm0093031001/analysis//spectral/fullrun_mos2_xmm0093031001_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete