[Thu Sep  6 22:55:36 2012] Detection parameters:
  Position = (219.3, 411.9) = 17 22 56.87 32 14 27.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.1 +/- 13.1
  Background counts = 7.8
  Rate = 0.02 +/- 0.002

[Thu Sep  6 22:55:36 2012] Off-axis axis estimate = 10.03'
[Thu Sep  6 23:28:32 2012] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 23:28:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep  6 23:28:32 2012] Initial guess for spatial extent in simple fitting = 11.44"
[Thu Sep  6 23:28:32 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.918
[Thu Sep  6 23:28:32 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.44"
[Thu Sep  6 23:48:44 2012] fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_src7.ximg exists
[Thu Sep  6 23:48:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_src7.csv
[Thu Sep  6 23:48:44 2012] fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Sep  6 23:48:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_src7.csv
[Thu Sep  6 23:48:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 23:48:44 2012] fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Sep  6 23:48:44 2012] fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Sep  6 23:48:44 2012] Fit fullrun_mos2_xmm0093031001_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Sep  6 23:48:51 2012] Spatial fit model total counts = 82.152700, observed total counts = 82.000000
[Thu Sep  6 23:48:51 2012] Offset between fit and detection position for source 15 = 0.231112 pixels
[Thu Sep  6 23:48:51 2012] 81.433700 total counts/ 46.255800 bgd. counts: snr = 5.172337
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.231112 pixels
  Position = (219.5, 412.0) = 17 22 56.80 32 14 27.9
  Extent = 5.5 (4.1-7.2)", rotation angle = 0
  Source counts = 35.2 +/- 9.0
  Background counts = 46.3
  Rate = 0.008 +/- 0.002
[Thu Sep  6 23:48:51 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 23:48:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 23:48:51 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 23:48:51 2012] Source does appear to be extended
[Thu Sep  6 23:48:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 00:21:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep  7 00:21:56 2012] Initial guess for spatial extent in simple fitting = 5.49"
[Fri Sep  7 00:21:56 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.967
[Fri Sep  7 00:21:56 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 5.49"
[Fri Sep  7 00:52:31 2012] fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_src7.ximg exists
[Fri Sep  7 00:52:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_src7.csv
[Fri Sep  7 00:52:31 2012] fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Sep  7 00:52:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_src7.csv
[Fri Sep  7 00:52:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 00:52:31 2012] fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Sep  7 00:52:31 2012] fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Sep  7 00:52:31 2012] Fit fullrun_mos2_xmm0093031001_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Sep  7 00:52:36 2012] Spatial fit model total counts = 82.153000, observed total counts = 82.000000
[Fri Sep  7 00:52:36 2012] Offset between fit and detection position for source 15 = 0.000075 pixels
[Fri Sep  7 00:52:36 2012] 81.433800 total counts/ 46.260500 bgd. counts: snr = 5.171398
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.000075 pixels
  Position = (219.5, 412.0) = 17 22 56.80 32 14 27.9
  Extent = 5.5 (4.1-7.3)", rotation angle = 0
  Source counts = 35.2 +/- 9.0
  Background counts = 46.3
  Rate = 0.008 +/- 0.002
[Fri Sep  7 00:52:36 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 00:52:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 00:52:36 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 00:52:36 2012] Source does appear to be extended
[Fri Sep  7 00:52:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 01:05:34 2012] XMMSAS src. selection expression = ellipse(19052.096600, 35792.261400, 329.163645, 329.163645, 0.000000, X, Y)
[Fri Sep  7 01:05:34 2012] Writing source region out to fullrun_mos2_xmm0093031001_pi300-10000_pass1_cl_src15_src.reg
[Fri Sep  7 01:05:34 2012] Extracting stamp from image fullrun_mos2_xmm0093031001_pi300-10000_cl_sm2.00.img.gz, (201, 393) - (238, 431)
[Fri Sep  7 01:05:34 2012] XMMSAS bgd. selection expression = annulus(19052.096600, 35792.261400, 548.606075, 1097.212151, X, Y)
[Fri Sep  7 01:05:34 2012] Writing fullrun_mos2_xmm0093031001_pi300-10000_pass1_cl_src15.gif
[Fri Sep  7 01:09:32 2012] Mean detx,y = (5228.53, 9700.77) 
[Fri Sep  7 01:09:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 01:09:37 2012] grppha failed
[Fri Sep  7 01:09:37 2012] Setting source spectrum file to fullrun_mos2_xmm0093031001_pi300-10000_pass1_cl_src15_src.pi.gz
[Fri Sep  7 01:09:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093031001_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri Sep  7 01:10:36 2012] Not generating rmf since there are only 35 counts
[Fri Sep  7 01:10:36 2012] rmf not generated due to insufficient counts
[Fri Sep  7 01:10:47 2012] Updating aperture counts using extracted products
[Fri Sep  7 01:10:47 2012] Error reading totcts from fullrun_mos2_xmm0093031001_pi300-10000_pass1_cl_src15_src.pi.gz
[Fri Sep  7 01:10:47 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 01:10:49 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep  7 01:10:50 2012] xmm0093031001/analysis//spectral/fullrun_mos2_xmm0093031001_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete