[Thu Sep 6 22:55:24 2012] Detection parameters: Position = (219.9, 481.3) = 17 22 56.72 32 19 30.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 43.1 +/- 9.1 Background counts = 9.3 Rate = 0.007 +/- 0.001 [Thu Sep 6 22:55:24 2012] Off-axis axis estimate = 14.43' [Thu Sep 6 23:16:27 2012] Using EEF radius (= 13.64 ")to estimate initial spatial extent for simple fitting [Thu Sep 6 23:16:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Sep 6 23:16:27 2012] Initial guess for spatial extent in simple fitting = 13.64" [Thu Sep 6 23:16:27 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.926 [Thu Sep 6 23:16:27 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.64" [Thu Sep 6 23:28:31 2012] fullrun_mos1_xmm0093031001_pi300-10000_cl_pass0_src11.ximg exists [Thu Sep 6 23:28:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093031001_pi300-10000_cl_pass0_src11.csv [Thu Sep 6 23:28:31 2012] fullrun_mos1_xmm0093031001_pi300-10000_cl_pass0_src11_1.ximg exists [Thu Sep 6 23:28:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093031001_pi300-10000_cl_pass0_src11.csv [Thu Sep 6 23:28:31 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0093031001_pi300-10000_cl_pass0_src11_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0093031001_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Sep 6 23:28:32 2012] fullrun_mos1_xmm0093031001_pi300-10000_cl_pass0_tfrozen_src11.ximg exists [Thu Sep 6 23:28:32 2012] fullrun_mos1_xmm0093031001_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists [Thu Sep 6 23:28:32 2012] Fit fullrun_mos1_xmm0093031001_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly [Thu Sep 6 23:48:50 2012] Spatial fit model total counts = 66.060200, observed total counts = 65.000000 [Thu Sep 6 23:48:50 2012] Offset between fit and detection position for source 12 = 0.446511 pixels [Thu Sep 6 23:48:50 2012] 65.168600 total counts/ 48.328500 bgd. counts: snr = 2.422384 Spatial fit parameters: Offset between fit and detection position for source 12 = 0.446511 pixels Position = (219.9, 480.9) = 17 22 56.71 32 19 27.7 Extent = 3.4" x 3.4", rotation angle = 0 Source counts = 16.8 +/- 8.1 Background counts = 48.3 Rate = 0.004 +/- 0.002 [Thu Sep 6 23:48:50 2012] Vigneting correction estimate = 1.000000 [Thu Sep 6 23:48:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Sep 6 23:48:50 2012] Assessing source extent using major [Thu Sep 6 23:48:50 2012] Source does appear to be extended [Thu Sep 6 23:48:50 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Sep 6 23:48:50 2012] Deleting source due to low Poisson probability 0.9