[Sat Jun  9 15:42:42 2012] Detection parameters:
  Position = (301.0, 322.1) = 17 22 27.31 32 7 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1139.7 +/- 42.4
  Background counts = 41.3
  Rate = 0.2 +/- 0.009

[Sat Jun  9 15:42:42 2012] Off-axis axis estimate = 1.73'
[Sat Jun  9 15:45:25 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 15:45:25 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun  9 15:45:25 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Jun  9 15:45:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Jun  9 16:05:30 2012] fullrun_pn_xmm0093030301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  9 16:05:30 2012] fullrun_pn_xmm0093030301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  9 16:05:30 2012] Fit fullrun_pn_xmm0093030301_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Jun  9 16:05:30 2012] fullrun_pn_xmm0093030301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  9 16:05:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun  9 16:05:30 2012] fullrun_pn_xmm0093030301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  9 16:05:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun  9 16:05:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093030301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093030301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 17:01:18 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.800972 pixels away
[Sat Jun  9 17:01:18 2012] Spatial fit model total counts = 445.417000, observed total counts = 444.000000
[Sat Jun  9 17:01:18 2012] Offset between fit and detection position for source 1 = 5.714342 pixels
[Sat Jun  9 17:01:18 2012] Warning, changing simple spatial fit ID from 1 to 6
[Sat Jun  9 17:01:18 2012] 458.394700 total counts/ 375.705000 bgd. counts: snr = 4.266070
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 5.714342 pixels
  Position = (295.5, 320.5) = 17 22 29.19 32 7 48.1
  Extent = 12.3 (8.6-14.1)", rotation angle = 0
  Source counts = 82.7 +/- 21.4
  Background counts = 375.7
  Rate = 0.07 +/- 0.02
[Sat Jun  9 17:01:18 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 17:01:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 17:01:18 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 17:01:18 2012] Source does appear to be extended
[Sat Jun  9 17:01:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 17:01:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 17:01:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 17:01:36 2012] Initial guess for spatial extent in simple fitting = 12.27"
[Sat Jun  9 17:01:36 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.111
[Sat Jun  9 17:01:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.27"
[Sat Jun  9 17:23:41 2012] fullrun_pn_xmm0093030301_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  9 17:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030301_pi300-10000_cl_pass1_src1.csv
[Sat Jun  9 17:23:41 2012] fullrun_pn_xmm0093030301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  9 17:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030301_pi300-10000_cl_pass1_src1.csv
[Sat Jun  9 17:23:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093030301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093030301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 17:23:41 2012] fullrun_pn_xmm0093030301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  9 17:23:41 2012] fullrun_pn_xmm0093030301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  9 17:23:41 2012] Fit fullrun_pn_xmm0093030301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun  9 18:27:50 2012] Spatial fit model total counts = 1989.890000, observed total counts = 1884.000000
[Sat Jun  9 18:27:50 2012] Offset between fit and detection position for source 1 = 5.417809 pixels
[Sat Jun  9 18:27:50 2012] 2007.286000 total counts/ 1056.860000 bgd. counts: snr = 29.235436
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 5.417809 pixels
  Position = (300.6, 322.3) = 17 22 27.44 32 7 56.1
  Extent = 16.1 (13.6-18.3)", rotation angle = 0
  Source counts = 950.4 +/- 44.8
  Background counts = 1056.9
  Rate = 0.8 +/- 0.04
[Sat Jun  9 18:27:50 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 18:27:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 18:27:50 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 18:27:50 2012] Source does appear to be extended
[Sat Jun  9 18:27:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 18:28:06 2012] XMMSAS src. selection expression = ellipse(26103.076000, 27993.429800, 967.794028, 967.794028, 0.000000, X, Y)
[Sat Jun  9 18:28:06 2012] Writing source region out to fullrun_pn_xmm0093030301_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  9 18:28:06 2012] Extracting stamp from image fullrun_pn_xmm0093030301_pi300-10000_cl_sm2.00.img.gz, (245, 267) - (356, 378)
[Sat Jun  9 18:28:06 2012] XMMSAS bgd. selection expression = annulus(26103.076000, 27993.429800, 1612.990046, 3225.980093, X, Y) && !ellipse(25833.997345, 29187.302002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25225.955811, 28938.578857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25103.059814, 27197.338959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29694.128400, 26531.468400, 687.781620, 687.781620, 0.000000, X, Y)
[Sat Jun  9 18:28:06 2012] Writing fullrun_pn_xmm0093030301_pi300-10000_pass1_cl_src1.gif
[Sat Jun  9 18:28:13 2012] Mean detx,y = (93.16, -224.58) 
[Sat Jun  9 18:28:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 18:29:34 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 18:29:35 2012] Setting source spectrum file to fullrun_pn_xmm0093030301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  9 18:29:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093030301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  9 20:39:46 2012] Updating aperture counts using extracted products
[Sat Jun  9 20:39:46 2012] Error reading totcts from fullrun_pn_xmm0093030301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  9 20:39:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 20:39:46 2012] Using photon index=1.80, rate=0.812, arf fullrun_pn_xmm0093030301_pi300-10000_pass1_cl_src1.arf
[Sat Jun  9 20:39:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 20:39:46 2012] Updating source flux to 1.9e-12
[Sat Jun  9 20:41:33 2012] Reading fit data from xmm0093030301/analysis//spectral/fullrun_pn_xmm0093030301_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun  9 20:41:33 2012] Spectral fit parameter nH value = 8.55354e+20
[Sat Jun  9 20:41:33 2012] Spectral fit parameter PhoIndex value = 1.79597
[Sat Jun  9 20:41:33 2012] Failed to get F(0.3-8.0) from xmm0093030301/analysis//spectral/fullrun_pn_xmm0093030301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun  9 20:41:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 20:41:33 2012] Using Nh = 8.6e+20, photon index=1.80, rate=0.812, arf fullrun_pn_xmm0093030301_pi300-10000_pass1_cl_src1.arf
[Sat Jun  9 20:41:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 20:41:33 2012] Updating source flux to 2.3e-12