[Sat Jun  9 15:43:51 2012] Detection parameters:
  Position = (301.2, 322.1) = 17 22 27.22 32 7 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1522.1 +/- 48.1
  Background counts = 33.0
  Rate = 0.2 +/- 0.006

[Sat Jun  9 15:43:51 2012] Off-axis axis estimate = 1.73'
[Sat Jun  9 16:32:07 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 16:32:07 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun  9 16:32:07 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Jun  9 16:32:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Jun  9 17:01:14 2012] fullrun_mos2_xmm0093030301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  9 17:01:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030301_pi300-10000_cl_pass0_src1.csv
[Sat Jun  9 17:01:14 2012] fullrun_mos2_xmm0093030301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  9 17:01:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030301_pi300-10000_cl_pass0_src1.csv
[Sat Jun  9 17:01:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093030301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093030301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 17:01:14 2012] fullrun_mos2_xmm0093030301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  9 17:01:14 2012] fullrun_mos2_xmm0093030301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  9 17:01:14 2012] Fit fullrun_mos2_xmm0093030301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun  9 17:01:27 2012] Spatial fit model total counts = 2662.570000, observed total counts = 2537.000000
[Sat Jun  9 17:01:27 2012] Offset between fit and detection position for source 1 = 0.355773 pixels
[Sat Jun  9 17:01:27 2012] 2684.280000 total counts/ 1418.990000 bgd. counts: snr = 33.589258
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.355773 pixels
  Position = (300.9, 322.3) = 17 22 27.33 32 7 55.9
  Extent = 12.6 (11.3-13.9)", rotation angle = 0
  Source counts = 1265.3 +/- 51.8
  Background counts = 1419.0
  Rate = 0.2 +/- 0.009
[Sat Jun  9 17:01:27 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 17:01:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 17:01:27 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 17:01:27 2012] Source does appear to be extended
[Sat Jun  9 17:01:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 17:54:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 17:54:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 17:54:23 2012] Initial guess for spatial extent in simple fitting = 12.62"
[Sat Jun  9 17:54:23 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.908
[Sat Jun  9 17:54:23 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.62"
[Sat Jun  9 18:27:44 2012] fullrun_mos2_xmm0093030301_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  9 18:27:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030301_pi300-10000_cl_pass1_src1.csv
[Sat Jun  9 18:27:44 2012] fullrun_mos2_xmm0093030301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  9 18:27:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030301_pi300-10000_cl_pass1_src1.csv
[Sat Jun  9 18:27:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093030301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093030301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 18:27:44 2012] fullrun_mos2_xmm0093030301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  9 18:27:45 2012] fullrun_mos2_xmm0093030301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  9 18:27:45 2012] Fit fullrun_mos2_xmm0093030301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun  9 18:27:57 2012] Spatial fit model total counts = 3711.320000, observed total counts = 3525.000000
[Sat Jun  9 18:27:57 2012] Offset between fit and detection position for source 1 = 0.115245 pixels
[Sat Jun  9 18:27:57 2012] 3732.380000 total counts/ 1992.290000 bgd. counts: snr = 38.984811
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.115245 pixels
  Position = (301.0, 322.3) = 17 22 27.29 32 7 55.8
  Extent = 15.2 (14.2-16.4)", rotation angle = 0
  Source counts = 1740.1 +/- 61.1
  Background counts = 1992.3
  Rate = 0.3 +/- 0.01
[Sat Jun  9 18:27:57 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 18:27:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 18:27:57 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 18:27:57 2012] Source does appear to be extended
[Sat Jun  9 18:27:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 18:27:57 2012] Source is confused with source 2
[Sat Jun  9 20:10:43 2012] Counts = 1740.090000, rescaling region sizes by 2.000000
[Sat Jun  9 20:10:43 2012] XMMSAS src. selection expression = ellipse(26141.384000, 27987.631200, 1818.768052, 1818.768052, 0.000000, X, Y)
[Sat Jun  9 20:10:43 2012] Writing source region out to fullrun_mos2_xmm0093030301_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  9 20:10:43 2012] Extracting stamp from image fullrun_mos2_xmm0093030301_pi300-10000_cl_sm2.00.img.gz, (197, 218) - (406, 427)
[Sat Jun  9 20:10:43 2012] XMMSAS bgd. selection expression = annulus(26141.384000, 27987.631200, 6062.560174, 12125.120349, X, Y) && !ellipse(26827.158000, 28470.384000, 1256.448036, 1256.448036, 0.000000, X, Y) && !ellipse(19017.718800, 22216.674300, 575.818417, 575.818417, 0.000000, X, Y) && !ellipse(28764.026611, 29530.578705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26356.002655, 29381.352783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18599.256200, 35780.823600, 522.814415, 522.814415, 0.000000, X, Y) && !ellipse(25136.709656, 29085.404633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25255.964000, 26098.038000, 1069.072031, 1069.072031, 0.000000, X, Y) && !ellipse(29868.210815, 26490.856903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25043.645569, 26864.095612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27436.873047, 28976.373199, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  9 20:10:43 2012] Writing fullrun_mos2_xmm0093030301_pi300-10000_pass1_cl_src1.gif
[Sat Jun  9 20:10:47 2012] Mean detx,y = (42.17, 113.43) 
[Sat Jun  9 20:10:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 20:17:34 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 20:17:34 2012] Setting source spectrum file to fullrun_mos2_xmm0093030301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  9 20:17:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093030301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  9 20:39:48 2012] Updating aperture counts using extracted products
[Sat Jun  9 20:39:48 2012] Error reading totcts from fullrun_mos2_xmm0093030301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  9 20:39:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 20:39:48 2012] Using photon index=1.80, rate=0.316, arf fullrun_mos2_xmm0093030301_pi300-10000_pass1_cl_src1.arf
[Sat Jun  9 20:39:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 20:39:48 2012] Updating source flux to 2.8e-12
[Sat Jun  9 20:40:26 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat Jun  9 20:41:15 2012] Reading fit data from xmm0093030301/analysis//spectral/fullrun_mos2_xmm0093030301_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun  9 20:41:15 2012] Spectral fit parameter nH value = 5.02951e+20
[Sat Jun  9 20:41:15 2012] Spectral fit parameter PhoIndex value = 1.65274
[Sat Jun  9 20:41:15 2012] Failed to get F(0.3-8.0) from xmm0093030301/analysis//spectral/fullrun_mos2_xmm0093030301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun  9 20:41:15 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 20:41:15 2012] Using Nh = 5e+20, photon index=1.65, rate=0.316, arf fullrun_mos2_xmm0093030301_pi300-10000_pass1_cl_src1.arf
[Sat Jun  9 20:41:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 20:41:15 2012] Updating source flux to 3.2e-12