[Wed Jun 19 07:47:37 2013] Detection parameters:
  Position = (349.5, 310.5) = 21 29 28.36 0 5 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.5 +/- 18.8
  Background counts = 220.5
  Rate = 0.005 +/- 0.0006

[Wed Jun 19 07:47:39 2013] Off-axis axis estimate = 3.80'
[Wed Jun 19 07:48:21 2013] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:48:21 2013] Initial guess for spatial extent in simple fitting = 8.33"
[Wed Jun 19 07:48:21 2013] source mask rpix=1.9, npix_max = 23, mask sum = 13, frac = 0.557
[Wed Jun 19 07:48:21 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 8.33"
[Wed Jun 19 07:48:22 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src36.ximg exists
[Wed Jun 19 07:48:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src36.csv
[Wed Jun 19 07:48:22 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src36_1.ximg exists
[Wed Jun 19 07:48:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src36.csv
[Wed Jun 19 07:48:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:48:23 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Wed Jun 19 07:48:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src36.csv
[Wed Jun 19 07:48:23 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Wed Jun 19 07:48:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src36.csv
[Wed Jun 19 07:48:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:48:44 2013] Warning, spatial fit 36 centroid is now closest to src. 42
[Wed Jun 19 07:48:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 07:48:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 07:48:44 2013] Assessing source extent using major
[Wed Jun 19 07:48:44 2013] Source does appear to be extended
[Wed Jun 19 07:48:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 07:48:44 2013] Source is confused with source 42
[Wed Jun 19 07:49:20 2013] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:49:20 2013] Initial guess for spatial extent in simple fitting = 8.33"
[Wed Jun 19 07:49:20 2013] source mask rpix=1.9, npix_max = 23, mask sum = 13, frac = 0.557
[Wed Jun 19 07:49:20 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 8.33"
[Wed Jun 19 07:49:22 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src34.ximg exists
[Wed Jun 19 07:49:22 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src34.csv
[Wed Jun 19 07:49:22 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src34_1.ximg exists
[Wed Jun 19 07:49:22 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src34.csv
[Wed Jun 19 07:49:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:49:23 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Wed Jun 19 07:49:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src34.csv
[Wed Jun 19 07:49:23 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Wed Jun 19 07:49:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src34.csv
[Wed Jun 19 07:49:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:49:40 2013] Spatial fit model total counts = -5537.460000, observed total counts = 1130.000000
[Wed Jun 19 07:49:40 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 19 07:49:40 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 07:49:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 07:49:40 2013] Assessing source extent using major
[Wed Jun 19 07:49:40 2013] Source does appear to be extended
[Wed Jun 19 07:49:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 07:50:11 2013] XMMSAS src. selection expression = ellipse(30357.994690, 26966.128387, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 07:50:11 2013] Not overwriting source region fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src38_src.reg
[Wed Jun 19 07:50:11 2013] Extracting stamp from image fullrun_pn_xmm0093030201_pi300-10000_cl_sm2.00.img.gz, (312, 273) - (387, 348)
[Wed Jun 19 07:50:11 2013] XMMSAS bgd. selection expression = annulus(30357.994690, 26966.128387, 1087.500000, 2175.000000, X, Y) && !ellipse(26859.219000, 26939.851800, 4192.197361, 4192.197361, 0.000000, X, Y) && !ellipse(27897.961365, 29172.956879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27649.941803, 28572.495453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31551.207336, 28470.170624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28444.000000, 28354.822876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29397.038696, 28312.265411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30076.306702, 26394.691742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30052.615875, 25633.638214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30651.978119, 25647.139038, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 07:50:11 2013] Writing fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src38.gif
[Wed Jun 19 07:50:15 2013] ../../xmm0093030201/products/events/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src38_src.evt and ../../xmm0093030201/products/events/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src38_bgd.evt exist, delete to re-create
[Wed Jun 19 07:50:15 2013] Mean detx,y = (2780.60, -509.62) 
[Wed Jun 19 07:50:15 2013] ../../xmm0093030201/products/images/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src38_src.img and ../../xmm0093030201/products/images/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src38_bgd.img exist, delete to re-create
[Wed Jun 19 07:50:15 2013] ../../xmm0093030201/products/spectra/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src38_src.pi and ../../xmm0093030201/products/spectra/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src38_bgd.pi exist, delete to re-create
[Wed Jun 19 07:50:15 2013] Setting source spectrum file to fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src38_src.pi.gz
[Wed Jun 19 07:50:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Wed Jun 19 07:50:15 2013] ../../xmm0093030201/products/lightcurves/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src38_src.lc and ../../xmm0093030201/products/lightcurves/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src38_bgd.lc exist, delete to re-create
[Wed Jun 19 07:50:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 07:50:28 2013] rmf not generated due to insufficient counts
[Wed Jun 19 08:12:11 2013] Updating aperture counts using extracted products
[Wed Jun 19 08:12:11 2013] Total counts from fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src38_src.pi.gz = 710.00
[Wed Jun 19 08:12:11 2013] Total counts from fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src38_bgd.pi.gz = 907.00
[Wed Jun 19 08:12:11 2013] Got source and background scale factors 791239.000000, 1852583.000000
[Wed Jun 19 08:12:11 2013] User source parameters:
  Position = (349.5, 310.5) = 21 29 28.36 0 5 18.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 322.6 +/- 27.7
  Background aperture counts = 387.4
  Rate = 0.008 +/- 0.0007

[Wed Jun 19 08:12:11 2013] Updating counts from extracted products
[Wed Jun 19 08:12:11 2013] Set source signif. to 322.62/19.68 = 16.39
[Wed Jun 19 08:12:16 2013] No arf file for this source, not re-computing flux
[Wed Jun 19 08:12:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 08:12:34 2013] xmm0093030201/analysis//spectral/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete