[Wed Jun 19 07:47:36 2013] Detection parameters:
  Position = (285.7, 328.3) = 21 29 46.87 0 6 56.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 322.8 +/- 41.5
  Background counts = 192.5
  Rate = 0.006 +/- 0.0008

[Wed Jun 19 07:47:39 2013] Off-axis axis estimate = 2.36'
[Wed Jun 19 07:48:21 2013] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:48:21 2013] Initial guess for spatial extent in simple fitting = 7.61"
[Wed Jun 19 07:48:21 2013] source mask rpix=1.7, npix_max = 20, mask sum = 22, frac = 1.088
[Wed Jun 19 07:48:21 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 7.61"
[Wed Jun 19 07:48:22 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src26.ximg exists
[Wed Jun 19 07:48:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src26.csv
[Wed Jun 19 07:48:22 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src26_1.ximg exists
[Wed Jun 19 07:48:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src26.csv
[Wed Jun 19 07:48:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:48:23 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Wed Jun 19 07:48:23 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Wed Jun 19 07:48:23 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Wed Jun 19 07:48:23 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Wed Jun 19 07:48:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:48:44 2013] Warning, spatial fit 26 centroid is now closest to src. 33
[Wed Jun 19 07:48:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 07:48:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 07:48:44 2013] Assessing source extent using major
[Wed Jun 19 07:48:44 2013] Source does appear to be extended
[Wed Jun 19 07:48:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 07:48:44 2013] Source is confused with source 32
[Wed Jun 19 07:48:44 2013] Source is confused with source 33
[Wed Jun 19 07:49:20 2013] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:49:20 2013] Initial guess for spatial extent in simple fitting = 7.61"
[Wed Jun 19 07:49:20 2013] source mask rpix=1.7, npix_max = 20, mask sum = 22, frac = 1.088
[Wed Jun 19 07:49:20 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 7.61"
[Wed Jun 19 07:49:21 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src24.ximg exists
[Wed Jun 19 07:49:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src24.csv
[Wed Jun 19 07:49:21 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src24_1.ximg exists
[Wed Jun 19 07:49:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src24.csv
[Wed Jun 19 07:49:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:49:22 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Wed Jun 19 07:49:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src24.csv
[Wed Jun 19 07:49:22 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Wed Jun 19 07:49:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src24.csv
[Wed Jun 19 07:49:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:49:40 2013] Source 26 is offset by 2.720409 and -0.458401 pixels which is larger than
2 X fitted extent = 0.874331 x 2.168253, not incorporating fit results
[Wed Jun 19 07:49:40 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 07:49:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 07:49:40 2013] Assessing source extent using major
[Wed Jun 19 07:49:40 2013] Source does appear to be extended
[Wed Jun 19 07:49:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 07:50:10 2013] XMMSAS src. selection expression = ellipse(24804.156616, 28515.428253, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 07:50:10 2013] Not overwriting source region fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src26_src.reg
[Wed Jun 19 07:50:10 2013] Extracting stamp from image fullrun_pn_xmm0093030201_pi300-10000_cl_sm2.00.img.gz, (248, 291) - (323, 366)
[Wed Jun 19 07:50:10 2013] XMMSAS bgd. selection expression = annulus(24804.156616, 28515.428253, 1087.500000, 2175.000000, X, Y) && !ellipse(26859.219000, 26939.851800, 4192.197361, 4192.197361, 0.000000, X, Y) && !ellipse(26370.369019, 28860.712158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25916.457245, 28957.036621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27056.380798, 28684.197845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27649.941803, 28572.495453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25041.704742, 28066.582275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24484.995544, 28044.882721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24151.271637, 27605.618744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24750.174561, 27275.468506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24630.825684, 26677.306335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25638.716000, 25474.918000, 1108.832032, 1108.832032, 0.000000, X, Y)
[Wed Jun 19 07:50:10 2013] Writing fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src26.gif
[Wed Jun 19 07:50:14 2013] ../../xmm0093030201/products/events/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src26_src.evt and ../../xmm0093030201/products/events/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src26_bgd.evt exist, delete to re-create
[Wed Jun 19 07:50:14 2013] Mean detx,y = (-2798.30, -597.31) 
[Wed Jun 19 07:50:14 2013] ../../xmm0093030201/products/images/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src26_src.img and ../../xmm0093030201/products/images/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src26_bgd.img exist, delete to re-create
[Wed Jun 19 07:50:14 2013] ../../xmm0093030201/products/spectra/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src26_src.pi and ../../xmm0093030201/products/spectra/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src26_bgd.pi exist, delete to re-create
[Wed Jun 19 07:50:14 2013] Setting source spectrum file to fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src26_src.pi.gz
[Wed Jun 19 07:50:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed Jun 19 07:50:14 2013] ../../xmm0093030201/products/lightcurves/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src26_src.lc and ../../xmm0093030201/products/lightcurves/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src26_bgd.lc exist, delete to re-create
[Wed Jun 19 07:50:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 07:50:27 2013] rmf not generated due to insufficient counts
[Wed Jun 19 08:12:08 2013] Updating aperture counts using extracted products
[Wed Jun 19 08:12:08 2013] Total counts from fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src26_src.pi.gz = 905.00
[Wed Jun 19 08:12:08 2013] Total counts from fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src26_bgd.pi.gz = 680.00
[Wed Jun 19 08:12:08 2013] Got source and background scale factors 870521.000000, 1390905.000000
[Wed Jun 19 08:12:08 2013] User source parameters:
  Position = (285.7, 328.3) = 21 29 46.87 0 6 56.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 479.4 +/- 31.1
  Background aperture counts = 425.6
  Rate = 0.01 +/- 0.0007

[Wed Jun 19 08:12:08 2013] Updating counts from extracted products
[Wed Jun 19 08:12:08 2013] Set source signif. to 479.41/20.63 = 23.24
[Wed Jun 19 08:12:16 2013] No arf file for this source, not re-computing flux
[Wed Jun 19 08:12:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 08:12:34 2013] xmm0093030201/analysis//spectral/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete