[Wed Jun 19 07:47:36 2013] Detection parameters:
  Position = (110.4, 333.0) = 21 30 37.70 0 6 58.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 248.3 +/- 25.9
  Background counts = 111.8
  Rate = 0.005 +/- 0.0005

[Wed Jun 19 07:47:39 2013] Off-axis axis estimate = 13.86'
[Wed Jun 19 07:48:21 2013] Using EEF radius (= 13.36 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:48:21 2013] Initial guess for spatial extent in simple fitting = 13.36"
[Wed Jun 19 07:48:21 2013] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.098
[Wed Jun 19 07:48:21 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 13.36"
[Wed Jun 19 07:48:22 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src25.ximg exists
[Wed Jun 19 07:48:22 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src25.csv
[Wed Jun 19 07:48:22 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed Jun 19 07:48:22 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src25.csv
[Wed Jun 19 07:48:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:48:23 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed Jun 19 07:48:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed Jun 19 07:48:23 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed Jun 19 07:48:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed Jun 19 07:48:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:48:44 2013] Warning, spatial fit 25 centroid is now closest to src. 35
[Wed Jun 19 07:48:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 07:48:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 07:48:44 2013] Assessing source extent using major
[Wed Jun 19 07:48:44 2013] Source does appear to be extended
[Wed Jun 19 07:48:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 07:49:20 2013] Using EEF radius (= 13.36 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:49:20 2013] Initial guess for spatial extent in simple fitting = 13.36"
[Wed Jun 19 07:49:20 2013] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.098
[Wed Jun 19 07:49:20 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 13.36"
[Wed Jun 19 07:49:21 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src23.ximg exists
[Wed Jun 19 07:49:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src23.csv
[Wed Jun 19 07:49:21 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src23_1.ximg exists
[Wed Jun 19 07:49:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src23.csv
[Wed Jun 19 07:49:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:49:22 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Wed Jun 19 07:49:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed Jun 19 07:49:22 2013] fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Wed Jun 19 07:49:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed Jun 19 07:49:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:49:40 2013] Warning, spatial fit 23 centroid is now closest to src. 35
[Wed Jun 19 07:49:40 2013] Source 25 is offset by -5.515669 and 4.070703 pixels which is larger than
2 X fitted extent = 1.552189 x 1.552189, not incorporating fit results
[Wed Jun 19 07:49:40 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 07:49:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 07:49:40 2013] Assessing source extent using major
[Wed Jun 19 07:49:40 2013] Source does appear to be extended
[Wed Jun 19 07:49:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 07:50:10 2013] XMMSAS src. selection expression = ellipse(9556.460762, 28921.475159, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 07:50:10 2013] Not overwriting source region fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src25_src.reg
[Wed Jun 19 07:50:10 2013] Extracting stamp from image fullrun_pn_xmm0093030201_pi300-10000_cl_sm2.00.img.gz, (73, 295) - (148, 370)
[Wed Jun 19 07:50:10 2013] XMMSAS bgd. selection expression = annulus(9556.460762, 28921.475159, 1087.500000, 2175.000000, X, Y) && !ellipse(11366.466620, 31684.758320, 840.488541, 403.426695, 290.159813, X, Y) && !ellipse(9003.910004, 27450.790710, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 07:50:10 2013] Writing fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src25.gif
[Wed Jun 19 07:50:14 2013] ../../xmm0093030201/products/events/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src25_src.evt and ../../xmm0093030201/products/events/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src25_bgd.evt exist, delete to re-create
[Wed Jun 19 07:50:14 2013] Mean detx,y = (-17654.41, 2540.83) 
[Wed Jun 19 07:50:14 2013] ../../xmm0093030201/products/images/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src25_src.img and ../../xmm0093030201/products/images/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src25_bgd.img exist, delete to re-create
[Wed Jun 19 07:50:14 2013] ../../xmm0093030201/products/spectra/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src25_src.pi and ../../xmm0093030201/products/spectra/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src25_bgd.pi exist, delete to re-create
[Wed Jun 19 07:50:14 2013] Setting source spectrum file to fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src25_src.pi.gz
[Wed Jun 19 07:50:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Wed Jun 19 07:50:14 2013] ../../xmm0093030201/products/lightcurves/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src25_src.lc and ../../xmm0093030201/products/lightcurves/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src25_bgd.lc exist, delete to re-create
[Wed Jun 19 07:50:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 07:50:27 2013] rmf not generated due to insufficient counts
[Wed Jun 19 08:12:08 2013] Updating aperture counts using extracted products
[Wed Jun 19 08:12:08 2013] Total counts from fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src25_src.pi.gz = 452.00
[Wed Jun 19 08:12:08 2013] Total counts from fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src25_bgd.pi.gz = 1394.00
[Wed Jun 19 08:12:08 2013] Got source and background scale factors 1331200.000000, 5625742.000000
[Wed Jun 19 08:12:08 2013] User source parameters:
  Position = (110.4, 333.0) = 21 30 37.70 0 6 58.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 122.1 +/- 22.3
  Background aperture counts = 329.9
  Rate = 0.003 +/- 0.0005

[Wed Jun 19 08:12:08 2013] Updating counts from extracted products
[Wed Jun 19 08:12:08 2013] Set source signif. to 122.14/18.16 = 6.73
[Wed Jun 19 08:12:16 2013] No arf file for this source, not re-computing flux
[Wed Jun 19 08:12:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 08:12:34 2013] xmm0093030201/analysis//spectral/fullrun_pn_xmm0093030201_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete