[Wed Jun 19 07:47:46 2013] Detection parameters:
  Position = (285.3, 116.7) = 21 29 46.99 -0 8 42.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.6 +/- 12.9
  Background counts = 31.7
  Rate = 0.001 +/- 0.0002

[Wed Jun 19 07:47:46 2013] Off-axis axis estimate = 13.21'
[Wed Jun 19 07:48:26 2013] Using EEF radius (= 13.03 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:48:26 2013] Initial guess for spatial extent in simple fitting = 13.03"
[Wed Jun 19 07:48:26 2013] source mask rpix=3.0, npix_max = 48, mask sum = 33, frac = 0.675
[Wed Jun 19 07:48:26 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 13.03"
[Wed Jun 19 07:48:27 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src59.ximg exists
[Wed Jun 19 07:48:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src59.csv
[Wed Jun 19 07:48:27 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src59_1.ximg exists
[Wed Jun 19 07:48:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src59.csv
[Wed Jun 19 07:48:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:48:28 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Wed Jun 19 07:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src59.csv
[Wed Jun 19 07:48:28 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Wed Jun 19 07:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src59.csv
[Wed Jun 19 07:48:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:49:05 2013] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 12.140356 pixels away
[Wed Jun 19 07:49:05 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 07:49:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 07:49:05 2013] Assessing source extent using major
[Wed Jun 19 07:49:05 2013] Source does appear to be extended
[Wed Jun 19 07:49:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 07:49:25 2013] Using EEF radius (= 13.03 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:49:25 2013] Initial guess for spatial extent in simple fitting = 13.03"
[Wed Jun 19 07:49:25 2013] source mask rpix=3.0, npix_max = 48, mask sum = 33, frac = 0.675
[Wed Jun 19 07:49:25 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 13.03"
[Wed Jun 19 07:49:27 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_src49.ximg exists
[Wed Jun 19 07:49:27 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_src49_1.ximg exists
[Wed Jun 19 07:49:27 2013] Fit fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_src49 appears to have run properly
[Wed Jun 19 07:49:29 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Wed Jun 19 07:49:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src49.csv
[Wed Jun 19 07:49:29 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Wed Jun 19 07:49:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src49.csv
[Wed Jun 19 07:49:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:49:56 2013] Spatial fit model total counts = 232.893000, observed total counts = 226.000000
[Wed Jun 19 07:49:56 2013] Offset between fit and detection position for source 61 = 1.830456 pixels
[Wed Jun 19 07:49:56 2013] 245.574100 total counts/ 91.849100 bgd. counts: snr = 16.040099
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 1.830456 pixels
  Position = (287.1, 116.5) = 21 29 46.46 -0 8 42.4
  Extent = 17.1 (3.9-26.1)" x 11.0 (3.3-20.8)", rotation angle = 14 (315-54) degrees
  Source counts = 153.7 +/- 15.7
  Background counts = 91.8
  Rate = 0.003 +/- 0.0003
[Wed Jun 19 07:49:56 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 07:49:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 07:49:56 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 07:49:56 2013] Source does appear to be extended
[Wed Jun 19 07:49:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.19
[Wed Jun 19 08:01:29 2013] XMMSAS src. selection expression = ellipse(24928.172200, 10083.606200, 1027.260030, 659.490019, 13.874011, X, Y)
[Wed Jun 19 08:01:29 2013] Not overwriting source region fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src61_src.reg
[Wed Jun 19 08:01:29 2013] Extracting stamp from image fullrun_mos2_xmm0093030201_pi300-10000_cl_sm2.00.img.gz, (228, 57) - (346, 175)
[Wed Jun 19 08:01:29 2013] XMMSAS bgd. selection expression = annulus(24928.172200, 10083.606200, 1712.100049, 3424.200099, X, Y) && !ellipse(27002.943024, 11711.410645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24639.088135, 14359.289948, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 08:01:29 2013] Writing fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src61.gif
[Wed Jun 19 08:05:21 2013] Mean detx,y = (-1889.81, -17032.03) 
[Wed Jun 19 08:05:22 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 08:05:52 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 08:05:52 2013] Setting source spectrum file to fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Wed Jun 19 08:05:52 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Wed Jun 19 08:12:28 2013] Updating aperture counts using extracted products
[Wed Jun 19 08:12:28 2013] Total counts from fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src61_src_b10.pi.gz = 227.00
[Wed Jun 19 08:12:28 2013] Total counts from fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src61_bgd.pi.gz = 1471.00
[Wed Jun 19 08:12:28 2013] Got source and background scale factors 1161764.000000, 10476439.000000
[Wed Jun 19 08:12:28 2013] User source parameters:
  Position = (287.1, 116.5) = 21 29 46.46 -0 8 42.4
  Extent = 17.1 (3.9-26.1)" x 11.0 (3.3-20.8)", rotation angle = 14 (315-54) degrees
  Source aperture counts = 63.9 +/- 16.1
  Background aperture counts = 163.1
  Rate = 0.001 +/- 0.0003

[Wed Jun 19 08:12:28 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 08:12:28 2013] Using photon index=1.80, rate=0.00273, arf fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src61.arf
[Wed Jun 19 08:12:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 08:12:28 2013] Updating source flux to 1.2e-13
[Wed Jun 19 08:12:33 2013] xmm0093030201/analysis//spectral/fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete