[Wed Jun 19 07:47:46 2013] Detection parameters:
  Position = (389.3, 258.9) = 21 29 16.80 0 1 36.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.1 +/- 17.0
  Background counts = 49.1
  Rate = 0.003 +/- 0.0004

[Wed Jun 19 07:47:46 2013] Off-axis axis estimate = 7.19'
[Wed Jun 19 07:48:26 2013] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:48:26 2013] Initial guess for spatial extent in simple fitting = 10.02"
[Wed Jun 19 07:48:26 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.954
[Wed Jun 19 07:48:26 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 10.02"
[Wed Jun 19 07:48:26 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src14.ximg exists
[Wed Jun 19 07:48:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src14.csv
[Wed Jun 19 07:48:26 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Jun 19 07:48:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src14.csv
[Wed Jun 19 07:48:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:48:27 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Jun 19 07:48:27 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Jun 19 07:48:27 2013] Fit fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Jun 19 07:49:05 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 13.190184 pixels away
[Wed Jun 19 07:49:05 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 07:49:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 07:49:05 2013] Assessing source extent using major
[Wed Jun 19 07:49:05 2013] Source does appear to be extended
[Wed Jun 19 07:49:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 07:49:25 2013] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:49:25 2013] Initial guess for spatial extent in simple fitting = 10.02"
[Wed Jun 19 07:49:25 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.954
[Wed Jun 19 07:49:25 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 10.02"
[Wed Jun 19 07:49:26 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_src13.ximg exists
[Wed Jun 19 07:49:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_src13.csv
[Wed Jun 19 07:49:26 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Jun 19 07:49:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_src13.csv
[Wed Jun 19 07:49:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:49:28 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Jun 19 07:49:28 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Jun 19 07:49:28 2013] Fit fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Jun 19 07:49:56 2013] Source 50 is offset by 5.087756 and 5.439770 pixels which is larger than
2 X fitted extent = 1.152046 x 1.152046, not incorporating fit results
[Wed Jun 19 07:49:56 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 07:49:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 07:49:56 2013] Assessing source extent using major
[Wed Jun 19 07:49:56 2013] Source does appear to be extended
[Wed Jun 19 07:49:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 08:01:29 2013] XMMSAS src. selection expression = ellipse(33824.894775, 22472.786011, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 08:01:29 2013] Not overwriting source region fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src50_src.reg
[Wed Jun 19 08:01:29 2013] Extracting stamp from image fullrun_mos2_xmm0093030201_pi300-10000_cl_sm2.00.img.gz, (352, 221) - (427, 296)
[Wed Jun 19 08:01:29 2013] XMMSAS bgd. selection expression = annulus(33824.894775, 22472.786011, 1087.500000, 2175.000000, X, Y) && !ellipse(35677.306061, 24932.744995, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 08:01:29 2013] Writing fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src50.gif
[Wed Jun 19 08:01:30 2013] ../../xmm0093030201/products/events/fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src50_src.evt and ../../xmm0093030201/products/events/fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src50_bgd.evt exist, delete to re-create
[Wed Jun 19 08:01:30 2013] Mean detx,y = (-7317.44, -2984.86) 
[Wed Jun 19 08:01:30 2013] ../../xmm0093030201/products/images/fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src50_src.img and ../../xmm0093030201/products/images/fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src50_bgd.img exist, delete to re-create
[Wed Jun 19 08:01:30 2013] ../../xmm0093030201/products/spectra/fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src50_src.pi and ../../xmm0093030201/products/spectra/fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src50_bgd.pi exist, delete to re-create
[Wed Jun 19 08:01:30 2013] Setting source spectrum file to fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src50_src.pi.gz
[Wed Jun 19 08:01:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Wed Jun 19 08:01:30 2013] ../../xmm0093030201/products/lightcurves/fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src50_src.lc and ../../xmm0093030201/products/lightcurves/fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src50_bgd.lc exist, delete to re-create
[Wed Jun 19 08:05:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 08:05:59 2013] rmf not generated due to insufficient counts
[Wed Jun 19 08:12:24 2013] Updating aperture counts using extracted products
[Wed Jun 19 08:12:24 2013] Total counts from fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src50_src.pi.gz = 350.00
[Wed Jun 19 08:12:24 2013] Total counts from fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src50_bgd.pi.gz = 1899.00
[Wed Jun 19 08:12:24 2013] Got source and background scale factors 1336108.000000, 10959216.000000
[Wed Jun 19 08:12:24 2013] User source parameters:
  Position = (389.3, 258.9) = 21 29 16.80 0 1 36.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 118.5 +/- 19.7
  Background aperture counts = 231.5
  Rate = 0.002 +/- 0.0004

[Wed Jun 19 08:12:24 2013] Updating counts from extracted products
[Wed Jun 19 08:12:24 2013] Set source signif. to 118.48/15.22 = 7.79
[Wed Jun 19 08:12:28 2013] No arf file for this source, not re-computing flux
[Wed Jun 19 08:12:32 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 08:12:33 2013] xmm0093030201/analysis//spectral/fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete