[Wed Jun 19 07:47:46 2013] Detection parameters:
  Position = (322.4, 282.3) = 21 29 36.21 0 3 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.8 +/- 17.1
  Background counts = 71.3
  Rate = 0.002 +/- 0.0003

[Wed Jun 19 07:47:46 2013] Off-axis axis estimate = 2.10'
[Wed Jun 19 07:48:26 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:48:26 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Wed Jun 19 07:48:26 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.269
[Wed Jun 19 07:48:26 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 7.48"
[Wed Jun 19 07:48:27 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src43.ximg exists
[Wed Jun 19 07:48:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src43.csv
[Wed Jun 19 07:48:27 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src43_1.ximg exists
[Wed Jun 19 07:48:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src43.csv
[Wed Jun 19 07:48:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:48:28 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Wed Jun 19 07:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src43.csv
[Wed Jun 19 07:48:28 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Wed Jun 19 07:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src43.csv
[Wed Jun 19 07:48:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:49:05 2013] Source 47 is offset by 2.278707 and 6.008543 pixels which is larger than
2 X fitted extent = 2.159241 x 2.159241, not incorporating fit results
[Wed Jun 19 07:49:05 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 07:49:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 07:49:05 2013] Assessing source extent using major
[Wed Jun 19 07:49:05 2013] Source does appear to be extended
[Wed Jun 19 07:49:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 07:49:25 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:49:25 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Wed Jun 19 07:49:25 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.269
[Wed Jun 19 07:49:25 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 7.48"
[Wed Jun 19 07:49:26 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_src36.ximg exists
[Wed Jun 19 07:49:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_src36.csv
[Wed Jun 19 07:49:26 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_src36_1.ximg exists
[Wed Jun 19 07:49:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_src36.csv
[Wed Jun 19 07:49:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:49:28 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Wed Jun 19 07:49:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src36.csv
[Wed Jun 19 07:49:28 2013] fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Wed Jun 19 07:49:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src36.csv
[Wed Jun 19 07:49:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:49:56 2013] Source 47 is offset by 0.956401 and -7.574836 pixels which is larger than
2 X fitted extent = 6.875678 x 6.875678, not incorporating fit results
[Wed Jun 19 07:49:56 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 07:49:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 07:49:56 2013] Assessing source extent using major
[Wed Jun 19 07:49:56 2013] Source does appear to be extended
[Wed Jun 19 07:49:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 08:01:29 2013] XMMSAS src. selection expression = ellipse(28004.605927, 24511.673279, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 08:01:29 2013] Not overwriting source region fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src47_src.reg
[Wed Jun 19 08:01:29 2013] Extracting stamp from image fullrun_mos2_xmm0093030201_pi300-10000_cl_sm2.00.img.gz, (285, 245) - (360, 320)
[Wed Jun 19 08:01:29 2013] XMMSAS bgd. selection expression = annulus(28004.605927, 24511.673279, 1087.500000, 2175.000000, X, Y) && !ellipse(26849.321320, 26935.725000, 3960.600114, 3960.600114, 0.000000, X, Y) && !ellipse(28133.284576, 26302.416199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28435.656000, 27304.656000, 1234.688036, 1234.688036, 0.000000, X, Y) && !ellipse(30192.741200, 25636.207600, 420.671212, 420.671212, 0.000000, X, Y) && !ellipse(29112.354000, 27853.804000, 1299.920037, 1299.920037, 0.000000, X, Y) && !ellipse(30794.521332, 25703.948700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25190.152740, 25543.446869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28279.271362, 21945.737473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29560.413269, 26306.807617, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 08:01:29 2013] Writing fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src47.gif
[Wed Jun 19 08:03:22 2013] Mean detx,y = (-1172.35, -2383.43) 
[Wed Jun 19 08:03:23 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 08:03:33 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 08:03:33 2013] Setting source spectrum file to fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Wed Jun 19 08:03:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Wed Jun 19 08:06:38 2013] Not generating rmf since there are only 81 counts
[Wed Jun 19 08:06:38 2013] rmf not generated due to insufficient counts
[Wed Jun 19 08:12:27 2013] Updating aperture counts using extracted products
[Wed Jun 19 08:12:27 2013] Total counts from fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src47_src_b10.pi.gz = 747.00
[Wed Jun 19 08:12:27 2013] Total counts from fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src47_bgd.pi.gz = 674.00
[Wed Jun 19 08:12:27 2013] Got source and background scale factors 1283204.000000, 2341140.000000
[Wed Jun 19 08:12:27 2013] User source parameters:
  Position = (322.4, 282.3) = 21 29 36.21 0 3 18.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 377.6 +/- 28.3
  Background aperture counts = 369.4
  Rate = 0.007 +/- 0.0005

[Wed Jun 19 08:12:27 2013] Updating counts from extracted products
[Wed Jun 19 08:12:27 2013] Set source signif. to 377.57/19.22 = 19.64
[Wed Jun 19 08:12:28 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 08:12:28 2013] Using photon index=1.80, rate=0.00671, arf fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src47.arf
[Wed Jun 19 08:12:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 08:12:28 2013] Updating source flux to 6.9e-14
[Wed Jun 19 08:12:32 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 08:12:33 2013] xmm0093030201/analysis//spectral/fullrun_mos2_xmm0093030201_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete