[Wed Jun 19 07:47:41 2013] Detection parameters:
  Position = (415.3, 314.3) = 21 29 9.27 0 5 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 256.4 +/- 21.1
  Background counts = 46.1
  Rate = 0.006 +/- 0.0005

[Wed Jun 19 07:47:43 2013] Off-axis axis estimate = 8.55'
[Wed Jun 19 07:48:24 2013] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:48:24 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 19 07:48:24 2013] Initial guess for spatial extent in simple fitting = 10.71"
[Wed Jun 19 07:48:24 2013] source mask rpix=2.5, npix_max = 35, mask sum = 34, frac = 0.969
[Wed Jun 19 07:48:24 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.71"
[Wed Jun 19 07:48:24 2013] fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jun 19 07:48:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_src4.csv
[Wed Jun 19 07:48:24 2013] fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jun 19 07:48:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_src4.csv
[Wed Jun 19 07:48:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:48:25 2013] fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jun 19 07:48:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jun 19 07:48:25 2013] fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jun 19 07:48:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jun 19 07:48:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:48:54 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 14.180339 pixels away
[Wed Jun 19 07:48:54 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 07:48:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 07:48:54 2013] Assessing source extent using major
[Wed Jun 19 07:48:54 2013] Source does appear to be extended
[Wed Jun 19 07:48:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 07:49:23 2013] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 07:49:23 2013] Initial guess for spatial extent in simple fitting = 10.71"
[Wed Jun 19 07:49:23 2013] source mask rpix=2.5, npix_max = 35, mask sum = 34, frac = 0.969
[Wed Jun 19 07:49:23 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 10.71"
[Wed Jun 19 07:49:23 2013] fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jun 19 07:49:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_src4.csv
[Wed Jun 19 07:49:23 2013] fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jun 19 07:49:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_src4.csv
[Wed Jun 19 07:49:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:49:24 2013] fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jun 19 07:49:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jun 19 07:49:24 2013] fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jun 19 07:49:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jun 19 07:49:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:49:47 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 14.181402 pixels away
[Wed Jun 19 07:49:47 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 07:49:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 07:49:47 2013] Assessing source extent using major
[Wed Jun 19 07:49:47 2013] Source does appear to be extended
[Wed Jun 19 07:49:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 07:50:32 2013] XMMSAS src. selection expression = ellipse(36086.499176, 27296.838837, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 07:50:32 2013] Not overwriting source region fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src21_src.reg
[Wed Jun 19 07:50:32 2013] Extracting stamp from image fullrun_mos1_xmm0093030201_pi300-10000_cl_sm2.00.img.gz, (378, 277) - (453, 352)
[Wed Jun 19 07:50:32 2013] XMMSAS bgd. selection expression = annulus(36086.499176, 27296.838837, 1087.500000, 2175.000000, X, Y) && !ellipse(35668.942719, 24866.499359, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 07:50:32 2013] Writing fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src21.gif
[Wed Jun 19 07:50:33 2013] ../../xmm0093030201/products/events/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0093030201/products/events/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Wed Jun 19 07:50:33 2013] Mean detx,y = (2452.84, 8164.27) 
[Wed Jun 19 07:50:33 2013] ../../xmm0093030201/products/images/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src21_src.img and ../../xmm0093030201/products/images/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Wed Jun 19 07:50:33 2013] ../../xmm0093030201/products/spectra/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src21_src.pi and ../../xmm0093030201/products/spectra/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Wed Jun 19 07:50:33 2013] Setting source spectrum file to fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src21_src.pi.gz
[Wed Jun 19 07:50:33 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed Jun 19 07:50:33 2013] ../../xmm0093030201/products/lightcurves/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0093030201/products/lightcurves/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Wed Jun 19 07:55:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 07:55:58 2013] rmf not generated due to insufficient counts
[Wed Jun 19 08:12:17 2013] Updating aperture counts using extracted products
[Wed Jun 19 08:12:17 2013] Total counts from fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src21_src.pi.gz = 396.00
[Wed Jun 19 08:12:17 2013] Total counts from fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src21_bgd.pi.gz = 1649.00
[Wed Jun 19 08:12:17 2013] Got source and background scale factors 1123820.000000, 9466657.000000
[Wed Jun 19 08:12:17 2013] User source parameters:
  Position = (415.3, 314.3) = 21 29 9.27 0 5 38.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 200.2 +/- 20.9
  Background aperture counts = 195.8
  Rate = 0.004 +/- 0.0004

[Wed Jun 19 08:12:17 2013] Updating counts from extracted products
[Wed Jun 19 08:12:17 2013] Set source signif. to 200.24/13.99 = 14.31
[Wed Jun 19 08:12:22 2013] No arf file for this source, not re-computing flux
[Wed Jun 19 08:12:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 08:12:32 2013] xmm0093030201/analysis//spectral/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete