[Wed Jun 19 07:47:40 2013] Detection parameters: Position = (333.8, 319.9) = 21 29 32.90 0 6 2.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 133.8 +/- 20.4 Background counts = 76.2 Rate = 0.002 +/- 0.0004 [Wed Jun 19 07:47:43 2013] Off-axis axis estimate = 3.00' [Wed Jun 19 07:48:24 2013] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting [Wed Jun 19 07:48:24 2013] Initial guess for spatial extent in simple fitting = 7.93" [Wed Jun 19 07:48:24 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.741 [Wed Jun 19 07:48:24 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 7.93" [Wed Jun 19 07:48:24 2013] fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_src21.ximg exists [Wed Jun 19 07:48:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_src21.csv [Wed Jun 19 07:48:24 2013] fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_src21_1.ximg exists [Wed Jun 19 07:48:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_src21.csv [Wed Jun 19 07:48:24 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_src21_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 19 07:48:25 2013] fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists [Wed Jun 19 07:48:25 2013] fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists [Wed Jun 19 07:48:25 2013] Fit fullrun_mos1_xmm0093030201_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly [Wed Jun 19 07:48:54 2013] Source 18 is offset by 7.141344 and 4.508404 pixels which is larger than 2 X fitted extent = 5.583632 x 5.583632, not incorporating fit results [Wed Jun 19 07:48:54 2013] Vigneting correction estimate = 1.000000 [Wed Jun 19 07:48:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 19 07:48:54 2013] Assessing source extent using major [Wed Jun 19 07:48:54 2013] Source does appear to be extended [Wed Jun 19 07:48:54 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 19 07:48:54 2013] Source is confused with source 20 [Wed Jun 19 07:49:23 2013] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting [Wed Jun 19 07:49:23 2013] Initial guess for spatial extent in simple fitting = 7.93" [Wed Jun 19 07:49:23 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.741 [Wed Jun 19 07:49:23 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 7.93" [Wed Jun 19 07:49:24 2013] fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_src19.ximg exists [Wed Jun 19 07:49:24 2013] fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_src19_1.ximg exists [Wed Jun 19 07:49:24 2013] Fit fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_src19 appears to have run properly [Wed Jun 19 07:49:25 2013] fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Wed Jun 19 07:49:25 2013] fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Wed Jun 19 07:49:25 2013] Fit fullrun_mos1_xmm0093030201_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly [Wed Jun 19 07:49:47 2013] Source 18 is offset by 7.141344 and 4.536266 pixels which is larger than 2 X fitted extent = 5.703219 x 5.703219, not incorporating fit results [Wed Jun 19 07:49:47 2013] Vigneting correction estimate = 1.000000 [Wed Jun 19 07:49:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 19 07:49:47 2013] Assessing source extent using major [Wed Jun 19 07:49:47 2013] Source does appear to be extended [Wed Jun 19 07:49:47 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 19 07:50:32 2013] XMMSAS src. selection expression = ellipse(28996.362915, 27786.373138, 652.500000, 652.500000, 0.000000, X, Y) [Wed Jun 19 07:50:32 2013] Not overwriting source region fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src18_src.reg [Wed Jun 19 07:50:32 2013] Extracting stamp from image fullrun_mos1_xmm0093030201_pi300-10000_cl_sm2.00.img.gz, (296, 282) - (371, 357) [Wed Jun 19 07:50:32 2013] XMMSAS bgd. selection expression = annulus(28996.362915, 27786.373138, 1087.500000, 2175.000000, X, Y) && !ellipse(26834.680108, 26936.266200, 3608.640104, 3608.640104, 0.000000, X, Y) && !ellipse(30178.432000, 25634.874800, 318.397609, 318.397609, 0.000000, X, Y) && !ellipse(30965.214200, 27030.135200, 533.346415, 533.346415, 0.000000, X, Y) && !ellipse(29137.607819, 27263.674866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29484.354645, 25960.331604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30229.578000, 25590.903686, 1547.515779, 1515.081202, 90.000000, X, Y) && !ellipse(27584.942000, 29734.270000, 1263.752036, 1263.752036, 0.000000, X, Y) && !ellipse(29838.705475, 26465.365967, 870.000000, 870.000000, 0.000000, X, Y) [Wed Jun 19 07:50:32 2013] Writing fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src18.gif [Wed Jun 19 07:50:33 2013] ../../xmm0093030201/products/events/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0093030201/products/events/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create [Wed Jun 19 07:50:33 2013] Mean detx,y = (1092.41, 1104.34) [Wed Jun 19 07:50:33 2013] ../../xmm0093030201/products/images/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src18_src.img and ../../xmm0093030201/products/images/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create [Wed Jun 19 07:50:33 2013] ../../xmm0093030201/products/spectra/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src18_src.pi and ../../xmm0093030201/products/spectra/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create [Wed Jun 19 07:50:33 2013] Setting source spectrum file to fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src18_src.pi.gz [Wed Jun 19 07:50:33 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src18_bgd.pi.gz [Wed Jun 19 07:50:33 2013] ../../xmm0093030201/products/lightcurves/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0093030201/products/lightcurves/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create [Wed Jun 19 07:56:00 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed Jun 19 07:56:00 2013] rmf not generated due to insufficient counts [Wed Jun 19 08:12:19 2013] Updating aperture counts using extracted products [Wed Jun 19 08:12:19 2013] Total counts from fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src18_src.pi.gz = 1033.00 [Wed Jun 19 08:12:19 2013] Total counts from fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src18_bgd.pi.gz = 673.00 [Wed Jun 19 08:12:19 2013] Got source and background scale factors 1332720.000000, 2191104.000000 [Wed Jun 19 08:12:19 2013] User source parameters: Position = (333.8, 319.9) = 21 29 32.90 0 6 2.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 623.7 +/- 33.2 Background aperture counts = 409.3 Rate = 0.01 +/- 0.0006 [Wed Jun 19 08:12:19 2013] Updating counts from extracted products [Wed Jun 19 08:12:19 2013] Set source signif. to 623.65/20.23 = 30.82 [Wed Jun 19 08:12:22 2013] No arf file for this source, not re-computing flux [Wed Jun 19 08:12:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed Jun 19 08:12:32 2013] xmm0093030201/analysis//spectral/fullrun_mos1_xmm0093030201_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete