[Thu Aug  2 23:34:10 2012] Detection parameters:
  Position = (250.0, 151.3) = 13 44 17.10 -27 22 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.1 +/- 7.9
  Background counts = 5.4
  Rate = 0.005 +/- 0.001

[Thu Aug  2 23:34:10 2012] Off-axis axis estimate = 11.23'
[Thu Aug  2 23:35:20 2012] Using EEF radius (= 12.04 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 23:35:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  2 23:35:20 2012] Initial guess for spatial extent in simple fitting = 12.04"
[Thu Aug  2 23:35:20 2012] source mask rpix=2.8, npix_max = 42, mask sum = 34, frac = 0.796
[Thu Aug  2 23:35:20 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.04"
[Thu Aug  2 23:48:06 2012] fullrun_pn_xmm0092970801_pi300-10000_cl_pass0_src6.ximg exists
[Thu Aug  2 23:48:06 2012] fullrun_pn_xmm0092970801_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Aug  2 23:48:06 2012] Fit fullrun_pn_xmm0092970801_pi300-10000_cl_pass0_src6 appears to have run properly
[Thu Aug  2 23:48:07 2012] fullrun_pn_xmm0092970801_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Aug  2 23:48:07 2012] fullrun_pn_xmm0092970801_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Aug  2 23:48:07 2012] Fit fullrun_pn_xmm0092970801_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Aug  3 00:03:05 2012] Spatial fit model total counts = 61.939700, observed total counts = 56.000000
[Fri Aug  3 00:03:05 2012] Offset between fit and detection position for source 6 = 0.597835 pixels
[Fri Aug  3 00:03:05 2012] 61.816100 total counts/ 30.464000 bgd. counts: snr = 5.680325
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.597835 pixels
  Position = (249.6, 151.8) = 13 44 17.22 -27 22 53.0
  Extent = 8.6 (6.0-11.9)", rotation angle = 0
  Source counts = 31.4 +/- 7.9
  Background counts = 30.5
  Rate = 0.007 +/- 0.002
[Fri Aug  3 00:03:05 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 00:03:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 00:03:05 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 00:03:05 2012] Source does appear to be extended
[Fri Aug  3 00:03:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 00:03:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 00:03:11 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Fri Aug  3 00:03:11 2012] source mask rpix=2.0, npix_max = 24, mask sum = 23, frac = 0.935
[Fri Aug  3 00:03:11 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 8.61"
[Fri Aug  3 00:15:28 2012] fullrun_pn_xmm0092970801_pi300-10000_cl_pass1_src6.ximg exists
[Fri Aug  3 00:15:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970801_pi300-10000_cl_pass1_src6.csv
[Fri Aug  3 00:15:28 2012] fullrun_pn_xmm0092970801_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Aug  3 00:15:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970801_pi300-10000_cl_pass1_src6.csv
[Fri Aug  3 00:15:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092970801_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092970801_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 00:15:29 2012] fullrun_pn_xmm0092970801_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Aug  3 00:15:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970801_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Aug  3 00:15:29 2012] fullrun_pn_xmm0092970801_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Aug  3 00:15:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970801_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Aug  3 00:15:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092970801_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092970801_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 00:28:40 2012] Spatial fit model total counts = 57.220700, observed total counts = 51.000000
[Fri Aug  3 00:28:40 2012] Offset between fit and detection position for source 6 = 0.061245 pixels
[Fri Aug  3 00:28:40 2012] 56.762300 total counts/ 23.992700 bgd. counts: snr = 6.690084
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.061245 pixels
  Position = (249.6, 151.8) = 13 44 17.22 -27 22 52.7
  Extent = 8.8 (6.1-11.5)", rotation angle = 0
  Source counts = 32.8 +/- 7.5
  Background counts = 24.0
  Rate = 0.008 +/- 0.002
[Fri Aug  3 00:28:40 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 00:28:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 00:28:40 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 00:28:40 2012] Source does appear to be extended
[Fri Aug  3 00:28:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 00:28:47 2012] XMMSAS src. selection expression = ellipse(21665.525200, 13160.385120, 529.902615, 529.902615, 0.000000, X, Y)
[Fri Aug  3 00:28:47 2012] Writing source region out to fullrun_pn_xmm0092970801_pi300-10000_pass1_cl_src6_src.reg
[Fri Aug  3 00:28:47 2012] Extracting stamp from image fullrun_pn_xmm0092970801_pi300-10000_cl_sm2.00.img.gz, (219, 121) - (280, 182)
[Fri Aug  3 00:28:47 2012] XMMSAS bgd. selection expression = annulus(21665.525200, 13160.385120, 883.171025, 1766.342051, X, Y)
[Fri Aug  3 00:28:47 2012] Writing fullrun_pn_xmm0092970801_pi300-10000_pass1_cl_src6.gif
[Fri Aug  3 00:30:26 2012] Mean detx,y = (6694.97, -9539.43) 
[Fri Aug  3 00:30:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 00:30:40 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 00:30:40 2012] Setting source spectrum file to fullrun_pn_xmm0092970801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Aug  3 00:30:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0092970801_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Aug  3 00:34:51 2012] Not generating rmf since there are only 32 counts
[Fri Aug  3 00:34:51 2012] rmf not generated due to insufficient counts
[Fri Aug  3 00:42:14 2012] Updating aperture counts using extracted products
[Fri Aug  3 00:42:14 2012] Error reading totcts from fullrun_pn_xmm0092970801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Aug  3 00:42:14 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 00:42:14 2012] Using photon index=1.80, rate=0.0077, arf fullrun_pn_xmm0092970801_pi300-10000_pass1_cl_src6.arf
[Fri Aug  3 00:42:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 00:42:14 2012] Updating source flux to 4.6e-14
[Fri Aug  3 00:42:22 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug  3 00:42:23 2012] xmm0092970801/analysis//spectral/fullrun_pn_xmm0092970801_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete