[Thu Aug  2 23:34:27 2012] Detection parameters:
  Position = (209.1, 425.4) = 13 44 30.35 -27 3 1.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.5 +/- 13.2
  Background counts = 13.2
  Rate = 0.01 +/- 0.001

[Thu Aug  2 23:34:27 2012] Off-axis axis estimate = 11.25'
[Thu Aug  2 23:48:07 2012] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 23:48:07 2012] Initial guess for spatial extent in simple fitting = 12.06"
[Thu Aug  2 23:48:07 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.981
[Thu Aug  2 23:48:07 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.06"
[Thu Aug  2 23:54:44 2012] fullrun_mos1_xmm0092970801_pi300-10000_cl_pass0_src3.ximg exists
[Thu Aug  2 23:54:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092970801_pi300-10000_cl_pass0_src3.csv
[Thu Aug  2 23:54:44 2012] fullrun_mos1_xmm0092970801_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Aug  2 23:54:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092970801_pi300-10000_cl_pass0_src3.csv
[Thu Aug  2 23:54:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092970801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092970801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 23:54:44 2012] fullrun_mos1_xmm0092970801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Aug  2 23:54:44 2012] fullrun_mos1_xmm0092970801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Aug  2 23:54:44 2012] Fit fullrun_mos1_xmm0092970801_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Aug  3 00:03:06 2012] Spatial fit model total counts = 85.972200, observed total counts = 86.000000
[Fri Aug  3 00:03:06 2012] Offset between fit and detection position for source 2 = 0.081717 pixels
[Fri Aug  3 00:03:06 2012] 86.483100 total counts/ 41.618100 bgd. counts: snr = 6.954510
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.081717 pixels
  Position = (209.2, 425.5) = 13 44 30.33 -27 3 2.3
  Extent = 5.2 (3.6-7.2)", rotation angle = 0
  Source counts = 44.9 +/- 9.3
  Background counts = 41.6
  Rate = 0.006 +/- 0.001
[Fri Aug  3 00:03:06 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 00:03:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 00:03:06 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 00:03:06 2012] Source does appear to be extended
[Fri Aug  3 00:03:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 00:15:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 00:15:29 2012] Initial guess for spatial extent in simple fitting = 5.17"
[Fri Aug  3 00:15:29 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.789
[Fri Aug  3 00:15:29 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.17"
[Fri Aug  3 00:21:49 2012] fullrun_mos1_xmm0092970801_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug  3 00:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092970801_pi300-10000_cl_pass1_src3.csv
[Fri Aug  3 00:21:49 2012] fullrun_mos1_xmm0092970801_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug  3 00:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092970801_pi300-10000_cl_pass1_src3.csv
[Fri Aug  3 00:21:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092970801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092970801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 00:21:49 2012] fullrun_mos1_xmm0092970801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug  3 00:21:49 2012] fullrun_mos1_xmm0092970801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug  3 00:21:49 2012] Fit fullrun_mos1_xmm0092970801_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug  3 00:28:41 2012] Warning, spatial fit 3 centroid is now closest to src. 3
[Fri Aug  3 00:28:41 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 00:28:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 00:28:41 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 00:28:41 2012] Source does appear to be extended
[Fri Aug  3 00:28:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 00:35:33 2012] XMMSAS src. selection expression = ellipse(18152.340400, 36965.832800, 310.173609, 310.173609, 0.000000, X, Y)
[Fri Aug  3 00:35:33 2012] Writing source region out to fullrun_mos1_xmm0092970801_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug  3 00:35:33 2012] Extracting stamp from image fullrun_mos1_xmm0092970801_pi300-10000_cl_sm2.00.img.gz, (191, 408) - (227, 443)
[Fri Aug  3 00:35:33 2012] XMMSAS bgd. selection expression = annulus(18152.340400, 36965.832800, 516.956015, 1033.912030, X, Y)
[Fri Aug  3 00:35:33 2012] Writing fullrun_mos1_xmm0092970801_pi300-10000_pass1_cl_src2.gif
[Fri Aug  3 00:35:52 2012] Mean detx,y = (-14200.10, 2946.18) 
[Fri Aug  3 00:35:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 00:36:00 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 00:36:00 2012] Setting source spectrum file to fullrun_mos1_xmm0092970801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug  3 00:36:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0092970801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Aug  3 00:36:35 2012] Not generating rmf since there are only 44 counts
[Fri Aug  3 00:36:35 2012] rmf not generated due to insufficient counts
[Fri Aug  3 00:42:14 2012] Updating aperture counts using extracted products
[Fri Aug  3 00:42:14 2012] Error reading totcts from fullrun_mos1_xmm0092970801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug  3 00:42:14 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 00:42:14 2012] Using photon index=1.80, rate=0.00624, arf fullrun_mos1_xmm0092970801_pi300-10000_pass1_cl_src2.arf
[Fri Aug  3 00:42:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 00:42:14 2012] Updating source flux to 1.7e-13
[Fri Aug  3 00:42:15 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug  3 00:42:16 2012] xmm0092970801/analysis//spectral/fullrun_mos1_xmm0092970801_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete