[Sat Sep 24 17:22:55 2011] Detection parameters:
  Position = (258.0, 308.7) = 11 7 32.46 -19 29 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.0 +/- 16.1
  Background counts = 92.7
  Rate = 0.07 +/- 0.01

[Sat Sep 24 17:22:55 2011] Off-axis axis estimate = 3.02'
[Sat Sep 24 17:26:13 2011] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 17:26:13 2011] Initial guess for spatial extent in simple fitting = 7.94"
[Sat Sep 24 17:26:13 2011] source mask rpix=1.8, npix_max = 21, mask sum = 18, frac = 0.832
[Sat Sep 24 17:26:13 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 7.94"
[Sat Sep 24 19:43:55 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src39.ximg exists
[Sat Sep 24 19:43:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src39.csv
[Sat Sep 24 19:43:55 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src39_1.ximg exists
[Sat Sep 24 19:43:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src39.csv
[Sat Sep 24 19:43:55 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 19:43:56 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sat Sep 24 19:43:56 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sat Sep 24 19:43:56 2011] Fit fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Sat Sep 24 19:48:06 2011] Source 39 is offset by -2.001391 and 5.619864 pixels which is larger than
2 X fitted extent = 2.185048 x 2.185048, not incorporating fit results
[Sat Sep 24 19:48:06 2011] Spatial fit model total counts = 654.390000, observed total counts = 654.000000
[Sat Sep 24 19:48:06 2011] Offset between fit and detection position for source 39 = 3.467607 pixels
[Sat Sep 24 19:48:06 2011] 572.785000 total counts/ 343.065000 bgd. counts: snr = 12.402539
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 3.467607 pixels
  Position = (255.0, 306.9) = 11 7 33.37 -19 29 23.5
  Extent = 14.3 (11.1-15.9)", rotation angle = 0
  Source counts = 229.7 +/- 23.9
  Background counts = 343.1
  Rate = 0.2 +/- 0.02
[Sat Sep 24 19:48:06 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 19:48:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 19:48:06 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 19:48:06 2011] Source does appear to be extended
[Sat Sep 24 19:48:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 19:48:06 2011] Source is confused with source 34
[Sat Sep 24 19:48:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 19:48:13 2011] Initial guess for spatial extent in simple fitting = 14.29"
[Sat Sep 24 19:48:13 2011] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.116
[Sat Sep 24 19:48:13 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 14.29"
[Sat Sep 24 23:47:54 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src37.ximg exists
[Sat Sep 24 23:47:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src37.csv
[Sat Sep 24 23:47:54 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src37_1.ximg exists
[Sat Sep 24 23:47:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src37.csv
[Sat Sep 24 23:47:54 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 23:47:55 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sat Sep 24 23:47:55 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sat Sep 24 23:47:55 2011] Fit fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Sat Sep 24 23:50:50 2011] Warning, spatial fit 37 centroid is now closest to src. 33
[Sat Sep 24 23:50:50 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 23:50:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 23:50:50 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 23:50:50 2011] Source does appear to be extended
[Sat Sep 24 23:50:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 23:50:59 2011] XMMSAS src. selection expression = ellipse(22138.980000, 26647.560000, 857.538025, 857.538025, 0.000000, X, Y)
[Sat Sep 24 23:50:59 2011] Writing source region out to fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src39_src.reg
[Sat Sep 24 23:50:59 2011] Extracting stamp from image fullrun_pn_xmm0092970701_pi300-10000_cl_sm2.00.img.gz, (206, 258) - (304, 356)
[Sat Sep 24 23:50:59 2011] XMMSAS bgd. selection expression = annulus(22138.980000, 26647.560000, 1429.230041, 2858.460082, X, Y) && !ellipse(20847.296097, 26429.812469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23183.463013, 26755.858032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21805.723660, 26678.006811, 1330.088493, 724.670493, -0.000000, X, Y) && !ellipse(19550.815600, 25718.290000, 755.161622, 755.161622, 0.000000, X, Y) && !ellipse(23935.032600, 26627.562000, 767.187222, 767.187222, 0.000000, X, Y) && !ellipse(23214.802979, 26285.607208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.742000, 25464.846000, 1142.768033, 754.137622, 50.802000, X, Y) && !ellipse(23731.917725, 27184.892181, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep 24 23:50:59 2011] Writing fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src39.gif
[Sun Sep 25 00:16:41 2011] Mean detx,y = (-4454.34, -394.77) 
[Sun Sep 25 00:16:43 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 00:16:59 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 00:17:00 2011] Setting source spectrum file to fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Sep 25 00:17:00 2011] Setting bgd. spectrum file to fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sun Sep 25 01:15:59 2011] Updating aperture counts using extracted products
[Sun Sep 25 01:15:59 2011] Error reading totcts from fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Sep 25 01:15:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 01:15:59 2011] Using photon index=1.80, rate=0.192, arf fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src39.arf
[Sun Sep 25 01:15:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 01:15:59 2011] Updating source flux to 6.3e-13
[Sun Sep 25 01:16:03 2011] Flag b found in src. 39 procflags, skipping spectral fitting
[Sun Sep 25 01:16:03 2011] Flag c found in src. 39 procflags, skipping spectral fitting