[Sat Sep 24 17:22:54 2011] Detection parameters:
  Position = (121.5, 246.9) = 11 8 14.47 -19 33 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.1 +/- 19.4
  Background counts = 69.4
  Rate = 0.04 +/- 0.007

[Sat Sep 24 17:22:55 2011] Off-axis axis estimate = 13.36'
[Sat Sep 24 17:26:13 2011] Using EEF radius (= 13.11 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 17:26:13 2011] Initial guess for spatial extent in simple fitting = 13.11"
[Sat Sep 24 17:26:13 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.992
[Sat Sep 24 17:26:13 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 13.11"
[Sat Sep 24 19:43:55 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src15.ximg exists
[Sat Sep 24 19:43:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src15.csv
[Sat Sep 24 19:43:55 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat Sep 24 19:43:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src15.csv
[Sat Sep 24 19:43:55 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 19:43:56 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat Sep 24 19:43:56 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Sep 24 19:43:56 2011] Fit fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sat Sep 24 19:48:06 2011] Warning, spatial fit 15 centroid is now closest to src. 1
[Sat Sep 24 19:48:06 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 19:48:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 19:48:06 2011] Assessing source extent using major
[Sat Sep 24 19:48:06 2011] Source does appear to be extended
[Sat Sep 24 19:48:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 19:48:06 2011] Source is confused with source 1
[Sat Sep 24 19:48:13 2011] Using EEF radius (= 13.11 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 19:48:13 2011] Initial guess for spatial extent in simple fitting = 13.11"
[Sat Sep 24 19:48:13 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.992
[Sat Sep 24 19:48:13 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 13.11"
[Sat Sep 24 23:47:54 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src13.ximg exists
[Sat Sep 24 23:47:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src13.csv
[Sat Sep 24 23:47:54 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat Sep 24 23:47:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src13.csv
[Sat Sep 24 23:47:54 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 23:47:55 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat Sep 24 23:47:55 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Sep 24 23:47:55 2011] Fit fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Sep 24 23:50:50 2011] Spatial fit model total counts = 5442.760000, observed total counts = 5423.000000
[Sat Sep 24 23:50:50 2011] Offset between fit and detection position for source 15 = 2.911641 pixels
[Sat Sep 24 23:50:50 2011] Warning, changing simple spatial fit ID from 13 to 11
[Sat Sep 24 23:50:50 2011] 5390.850000 total counts/ 3780.980000 bgd. counts: snr = 26.181144
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 2.911641 pixels
  Position = (123.4, 249.1) = 11 8 13.89 -19 33 34.0
  Extent = 51.5 (37.7-103.0)", rotation angle = 0
  Source counts = 1609.9 +/- 73.4
  Background counts = 3781.0
  Rate = 1 +/- 0.06
[Sat Sep 24 23:50:50 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 23:50:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 23:50:50 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 23:50:50 2011] Source does appear to be extended
[Sat Sep 24 23:50:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 23:50:58 2011] Counts = 1609.870000, rescaling region sizes by 2.000000
[Sat Sep 24 23:50:58 2011] XMMSAS src. selection expression = ellipse(10688.176000, 21626.986000, 6182.880178, 6182.880178, 0.000000, X, Y)
[Sat Sep 24 23:50:58 2011] Writing source region out to fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src15_src.reg
[Sat Sep 24 23:50:58 2011] Extracting stamp from image fullrun_pn_xmm0092970701_pi300-10000_cl_sm2.00.img.gz, (0, 0) - (479, 595)
[Sat Sep 24 23:50:59 2011] XMMSAS bgd. selection expression = annulus(10688.176000, 21626.986000, 20609.600593, 41219.201186, X, Y) && !ellipse(10056.674000, 21071.230000, 1321.168038, 1321.168038, 0.000000, X, Y) && !ellipse(9230.624283, 21985.027924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12439.402000, 23404.866000, 1970.304057, 1970.304057, 0.000000, X, Y) && !ellipse(13590.141235, 23434.527893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10746.458168, 22799.099731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11617.914000, 23141.966000, 1881.792054, 1881.792054, 0.000000, X, Y) && !ellipse(10535.024000, 22415.952800, 2030.560058, 2030.560058, 0.000000, X, Y) && !ellipse(19773.150894, 10802.558937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13259.282000, 22995.070000, 1880.688054, 1880.688054, 0.000000, X, Y) && !ellipse(11420.222000, 22468.660000, 1970.304057, 1970.304057, 0.000000, X, Y) && !ellipse(11286.546000, 22242.762000, 2066.504059, 2066.504059, 0.000000, X, Y) && !ellipse(10951.251862, 21618.373688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9449.289177, 21111.360001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12482.110000, 20826.641200, 2022.760058, 2022.760058, 0.000000, X, Y) && !ellipse(10161.410515, 20136.919113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11156.531800, 19443.678000, 2089.128060, 2089.128060, 0.000000, X, Y) && !ellipse(10872.564095, 17404.563416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12885.669037, 23651.738495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14620.354000, 23835.259640, 1734.280050, 1734.280050, 0.000000, X, Y) && !ellipse(14105.120000, 22502.394000, 1858.208053, 537.643215, 66.298200, X, Y) && !ellipse(13832.743210, 22936.391296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27620.940918, 17228.909332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16609.901199, 24501.262909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15342.582703, 24494.604095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26643.100000, 19129.100000, 1455.896042, 1455.896042, 0.000000, X, Y) && !ellipse(26068.360000, 18791.804000, 1524.984044, 1524.984044, 0.000000, X, Y) && !ellipse(20847.296097, 26429.812469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23183.463013, 26755.858032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21805.723660, 26678.006811, 1330.088493, 724.670493, -0.000000, X, Y) && !ellipse(19550.815600, 25718.290000, 755.161622, 755.161622, 0.000000, X, Y) && !ellipse(16870.332000, 24895.798000, 1656.064048, 1656.064048, 0.000000, X, Y) && !ellipse(25197.984000, 18862.954000, 1475.744042, 1475.744042, 0.000000, X, Y) && !ellipse(26634.845440, 18337.382000, 1855.240053, 1855.240053, 0.000000, X, Y) && !ellipse(22138.980000, 26647.560000, 1143.384033, 1143.384033, 0.000000, X, Y) && !ellipse(23935.032600, 26627.562000, 767.187222, 767.187222, 0.000000, X, Y) && !ellipse(23214.802979, 26285.607208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.742000, 25464.846000, 1142.768033, 754.137622, 50.802000, X, Y) && !ellipse(23731.917725, 27184.892181, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep 24 23:50:59 2011] Writing fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src15.gif
[Sat Sep 24 23:57:17 2011] Mean detx,y = (-14867.66, 1454.31) 
[Sat Sep 24 23:57:20 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 00:05:32 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 00:05:32 2011] Setting source spectrum file to fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Sep 25 00:05:32 2011] Setting bgd. spectrum file to fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun Sep 25 01:15:59 2011] Updating aperture counts using extracted products
[Sun Sep 25 01:15:59 2011] Error reading totcts from fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Sep 25 01:15:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 01:15:59 2011] Using photon index=1.80, rate=1.35, arf fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src15.arf
[Sun Sep 25 01:15:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 01:15:59 2011] Updating source flux to 9.3e-12
[Sun Sep 25 01:16:03 2011] Flag c found in src. 15 procflags, skipping spectral fitting