[Sat Sep 24 17:22:54 2011] Detection parameters:
  Position = (116.1, 244.1) = 11 8 16.13 -19 33 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.7 +/- 21.3
  Background counts = 65.7
  Rate = 0.06 +/- 0.008

[Sat Sep 24 17:22:55 2011] Off-axis axis estimate = 13.79'
[Sat Sep 24 17:26:13 2011] Using EEF radius (= 13.32 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 17:26:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 17:26:13 2011] Initial guess for spatial extent in simple fitting = 13.32"
[Sat Sep 24 17:26:13 2011] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.965
[Sat Sep 24 17:26:13 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 13.32"
[Sat Sep 24 19:43:54 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src1.ximg exists
[Sat Sep 24 19:43:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src1.csv
[Sat Sep 24 19:43:54 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Sep 24 19:43:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src1.csv
[Sat Sep 24 19:43:54 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 19:43:55 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 19:43:55 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 19:43:55 2011] Fit fullrun_pn_xmm0092970701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep 24 19:48:06 2011] Spatial fit model total counts = 1470.130000, observed total counts = 1541.000000
[Sat Sep 24 19:48:06 2011] Offset between fit and detection position for source 1 = 4.102668 pixels
[Sat Sep 24 19:48:06 2011] 1464.065000 total counts/ 814.206000 bgd. counts: snr = 22.774665
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.102668 pixels
  Position = (115.7, 240.0) = 11 8 16.27 -19 34 13.6
  Extent = 23.5 (22.2-25.1)", rotation angle = 0
  Source counts = 649.9 +/- 38.3
  Background counts = 814.2
  Rate = 0.5 +/- 0.03
[Sat Sep 24 19:48:06 2011] Source 1 is offset by -0.551331 and -3.604230 pixels which is larger than
2 X fitted extent = 2.715416 x 2.715416, not incorporating fit results
[Sat Sep 24 19:48:06 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 19:48:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 19:48:06 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 19:48:06 2011] Source does appear to be extended
[Sat Sep 24 19:48:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 19:48:06 2011] Source is confused with source 2
[Sat Sep 24 19:48:06 2011] Source is confused with source 14
[Sat Sep 24 19:48:06 2011] Source is confused with source 15
[Sat Sep 24 19:48:06 2011] Source is confused with source 16
[Sat Sep 24 19:48:06 2011] Source is confused with source 18
[Sat Sep 24 19:48:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 19:48:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 19:48:13 2011] Initial guess for spatial extent in simple fitting = 23.49"
[Sat Sep 24 19:48:13 2011] source mask rpix=5.4, npix_max = 139, mask sum = 137, frac = 0.984
[Sat Sep 24 19:48:13 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 23.49"
[Sat Sep 24 23:47:53 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src1.ximg exists
[Sat Sep 24 23:47:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src1.csv
[Sat Sep 24 23:47:53 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Sep 24 23:47:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src1.csv
[Sat Sep 24 23:47:53 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 23:47:54 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 23:47:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Sep 24 23:47:54 2011] fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 23:47:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Sep 24 23:47:54 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092970701_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 23:50:50 2011] Warning, spatial fit 1 centroid is now closest to src. 7
[Sat Sep 24 23:50:50 2011] Spatial fit model total counts = 1765.560000, observed total counts = 1766.000000
[Sat Sep 24 23:50:50 2011] Offset between fit and detection position for source 1 = 2.773163 pixels
[Sat Sep 24 23:50:50 2011] Warning, changing simple spatial fit ID from 1 to 13
[Sat Sep 24 23:50:50 2011] 1761.234000 total counts/ 1602.330000 bgd. counts: snr = 3.969711
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.773163 pixels
  Position = (116.2, 242.8) = 11 8 16.12 -19 34 1.8
  Extent = 16.5 (9.6-26.2)", rotation angle = 0
  Source counts = 158.9 +/- 42.0
  Background counts = 1602.3
  Rate = 0.1 +/- 0.04
[Sat Sep 24 23:50:50 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 23:50:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 23:50:50 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 23:50:50 2011] Source does appear to be extended
[Sat Sep 24 23:50:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 23:50:58 2011] XMMSAS src. selection expression = ellipse(10056.674000, 21071.230000, 990.876029, 990.876029, 0.000000, X, Y)
[Sat Sep 24 23:50:58 2011] Writing source region out to fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src1_src.reg
[Sat Sep 24 23:50:58 2011] Extracting stamp from image fullrun_pn_xmm0092970701_pi300-10000_cl_sm2.00.img.gz, (59, 186) - (173, 300)
[Sat Sep 24 23:50:58 2011] XMMSAS bgd. selection expression = annulus(10056.674000, 21071.230000, 1651.460048, 3302.920095, X, Y) && !ellipse(9230.624283, 21985.027924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12439.402000, 23404.866000, 1970.304057, 1970.304057, 0.000000, X, Y) && !ellipse(13590.141235, 23434.527893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10746.458168, 22799.099731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11617.914000, 23141.966000, 1881.792054, 1881.792054, 0.000000, X, Y) && !ellipse(10535.024000, 22415.952800, 2030.560058, 2030.560058, 0.000000, X, Y) && !ellipse(13259.282000, 22995.070000, 1880.688054, 1880.688054, 0.000000, X, Y) && !ellipse(11420.222000, 22468.660000, 1970.304057, 1970.304057, 0.000000, X, Y) && !ellipse(11286.546000, 22242.762000, 2066.504059, 2066.504059, 0.000000, X, Y) && !ellipse(10951.251862, 21618.373688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10688.176000, 21626.986000, 4121.920119, 4121.920119, 0.000000, X, Y) && !ellipse(9449.289177, 21111.360001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12482.110000, 20826.641200, 2022.760058, 2022.760058, 0.000000, X, Y) && !ellipse(10161.410515, 20136.919113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11156.531800, 19443.678000, 2089.128060, 2089.128060, 0.000000, X, Y) && !ellipse(10872.564095, 17404.563416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12885.669037, 23651.738495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14620.354000, 23835.259640, 1734.280050, 1734.280050, 0.000000, X, Y) && !ellipse(14105.120000, 22502.394000, 1858.208053, 537.643215, 66.298200, X, Y) && !ellipse(13832.743210, 22936.391296, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep 24 23:50:58 2011] Writing fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src1.gif
[Sat Sep 24 23:51:04 2011] Mean detx,y = (-17516.21, 631.02) 
[Sat Sep 24 23:51:05 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 23:51:22 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 23:51:22 2011] Setting source spectrum file to fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Sep 24 23:51:22 2011] Setting bgd. spectrum file to fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Sep 25 01:15:58 2011] Updating aperture counts using extracted products
[Sun Sep 25 01:15:58 2011] Error reading totcts from fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Sep 25 01:15:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 01:15:59 2011] Using photon index=1.80, rate=0.133, arf fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src1.arf
[Sun Sep 25 01:15:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 01:15:59 2011] Updating source flux to 1.1e-12
[Sun Sep 25 01:16:03 2011] Flag b found in src. 1 procflags, skipping spectral fitting
[Sun Sep 25 01:16:03 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Sep 25 01:21:22 2011] Reading fit data from xmm0092970701/analysis//spectral/fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src1_pl.csv
[Sun Sep 25 01:21:22 2011] Spectral fit parameter nH value = 1.27491e+12
[Sun Sep 25 01:21:22 2011] Spectral fit parameter PhoIndex value = -0.0164733
[Sun Sep 25 01:21:22 2011] Failed to get F(0.3-8.0) from xmm0092970701/analysis//spectral/fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 01:21:22 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 01:21:22 2011] Using Nh = 1.3e+12, photon index=-0.02, rate=0.133, arf fullrun_pn_xmm0092970701_pi300-10000_pass1_cl_src1.arf
[Sun Sep 25 01:21:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 01:21:22 2011] Updating source flux to 4e-12