[Thu Sep 29 13:28:56 2011] Detection parameters:
  Position = (295.0, 274.0) = 13 43 2.35 -48 10 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.0 +/- 14.0
  Background counts = 6.4
  Rate = 0.02 +/- 0.002

[Thu Sep 29 13:28:56 2011] Off-axis axis estimate = 1.79'
[Thu Sep 29 13:57:41 2011] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 13:57:41 2011] Initial guess for spatial extent in simple fitting = 7.32"
[Thu Sep 29 13:57:41 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Thu Sep 29 13:57:41 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.32"
[Thu Sep 29 14:11:23 2011] fullrun_mos2_xmm0092970501_pi300-10000_cl_pass0_src3.ximg exists
[Thu Sep 29 14:11:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092970501_pi300-10000_cl_pass0_src3.csv
[Thu Sep 29 14:11:23 2011] fullrun_mos2_xmm0092970501_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Sep 29 14:11:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092970501_pi300-10000_cl_pass0_src3.csv
[Thu Sep 29 14:11:23 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092970501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092970501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 14:11:23 2011] fullrun_mos2_xmm0092970501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Sep 29 14:11:23 2011] fullrun_mos2_xmm0092970501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Sep 29 14:11:23 2011] Fit fullrun_mos2_xmm0092970501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Sep 29 14:11:29 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 10.186297 pixels away
[Thu Sep 29 14:11:29 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 14:11:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 14:11:29 2011] Assessing source extent using major
[Thu Sep 29 14:11:29 2011] Source does appear to be extended
[Thu Sep 29 14:11:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 14:34:33 2011] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 14:34:33 2011] Initial guess for spatial extent in simple fitting = 7.32"
[Thu Sep 29 14:34:33 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Thu Sep 29 14:34:33 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.32"
[Thu Sep 29 14:44:49 2011] fullrun_mos2_xmm0092970501_pi300-10000_cl_pass1_src3.ximg exists
[Thu Sep 29 14:44:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092970501_pi300-10000_cl_pass1_src3.csv
[Thu Sep 29 14:44:49 2011] fullrun_mos2_xmm0092970501_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Sep 29 14:44:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092970501_pi300-10000_cl_pass1_src3.csv
[Thu Sep 29 14:44:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092970501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092970501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 14:44:49 2011] fullrun_mos2_xmm0092970501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Sep 29 14:44:49 2011] fullrun_mos2_xmm0092970501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Sep 29 14:44:49 2011] Fit fullrun_mos2_xmm0092970501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Sep 29 14:44:55 2011] Spatial fit model total counts = 192.321000, observed total counts = 194.000000
[Thu Sep 29 14:44:55 2011] Offset between fit and detection position for source 8 = 0.237322 pixels
[Thu Sep 29 14:44:55 2011] 191.842200 total counts/ 98.720500 bgd. counts: snr = 9.372322
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.237322 pixels
  Position = (295.2, 274.2) = 13 43 2.30 -48 10 9.6
  Extent = 5.8 (4.8-7.2)", rotation angle = 0
  Source counts = 93.1 +/- 13.9
  Background counts = 98.7
  Rate = 0.01 +/- 0.002
[Thu Sep 29 14:44:55 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 14:44:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 14:44:55 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 14:44:55 2011] Source does appear to be extended
[Thu Sep 29 14:44:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 15:03:55 2011] XMMSAS src. selection expression = ellipse(25631.676140, 23811.014200, 347.173810, 347.173810, 0.000000, X, Y)
[Thu Sep 29 15:03:55 2011] Writing source region out to fullrun_mos2_xmm0092970501_pi300-10000_pass1_cl_src8_src.reg
[Thu Sep 29 15:03:55 2011] Extracting stamp from image fullrun_mos2_xmm0092970501_pi300-10000_cl_sm2.00.img.gz, (275, 254) - (315, 294)
[Thu Sep 29 15:03:55 2011] XMMSAS bgd. selection expression = annulus(25631.676140, 23811.014200, 578.623017, 1157.246033, X, Y)
[Thu Sep 29 15:03:55 2011] Writing fullrun_mos2_xmm0092970501_pi300-10000_pass1_cl_src8.gif
[Thu Sep 29 15:04:20 2011] Mean detx,y = (-2.56, 129.94) 
[Thu Sep 29 15:04:21 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Sep 29 15:04:26 2011] Binned source spectrum to 10 counts/bin
[Thu Sep 29 15:04:27 2011] Setting source spectrum file to fullrun_mos2_xmm0092970501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Sep 29 15:04:27 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0092970501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Sep 29 15:09:18 2011] Not generating rmf since there are only 93 counts
[Thu Sep 29 15:09:18 2011] rmf not generated due to insufficient counts
[Thu Sep 29 15:09:45 2011] Updating aperture counts using extracted products
[Thu Sep 29 15:09:45 2011] Error reading totcts from fullrun_mos2_xmm0092970501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Sep 29 15:09:45 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 15:09:45 2011] Using photon index=1.80, rate=0.0105, arf fullrun_mos2_xmm0092970501_pi300-10000_pass1_cl_src8.arf
[Thu Sep 29 15:09:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Sep 29 15:09:45 2011] Updating source flux to 1.4e-13
[Thu Sep 29 15:09:53 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting