[Wed Sep 28 14:23:29 2011] Detection parameters:
  Position = (446.3, 291.9) = 10 29 44.67 -46 21 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.5 +/- 7.3
  Background counts = 3.6
  Rate = 0.007 +/- 0.001

[Wed Sep 28 14:23:29 2011] Off-axis axis estimate = 10.73'
[Wed Sep 28 14:24:33 2011] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 14:24:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 14:24:33 2011] Initial guess for spatial extent in simple fitting = 11.79"
[Wed Sep 28 14:24:33 2011] source mask rpix=2.7, npix_max = 41, mask sum = 33, frac = 0.800
[Wed Sep 28 14:24:33 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 11.79"
[Wed Sep 28 14:36:33 2011] fullrun_pn_xmm0092970301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Sep 28 14:36:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970301_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 14:36:33 2011] fullrun_pn_xmm0092970301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Sep 28 14:36:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970301_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 14:36:33 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092970301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092970301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 14:36:33 2011] fullrun_pn_xmm0092970301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 14:36:33 2011] fullrun_pn_xmm0092970301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 14:36:33 2011] Fit fullrun_pn_xmm0092970301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 15:00:43 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.982608 pixels away
[Wed Sep 28 15:00:43 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 15:00:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 15:00:43 2011] Assessing source extent using major
[Wed Sep 28 15:00:43 2011] Source does appear to be extended
[Wed Sep 28 15:00:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 15:00:52 2011] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 15:00:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 15:00:52 2011] Initial guess for spatial extent in simple fitting = 11.79"
[Wed Sep 28 15:00:52 2011] source mask rpix=2.7, npix_max = 41, mask sum = 33, frac = 0.800
[Wed Sep 28 15:00:52 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 11.79"
[Wed Sep 28 15:11:15 2011] fullrun_pn_xmm0092970301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Sep 28 15:11:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970301_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 15:11:15 2011] fullrun_pn_xmm0092970301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Sep 28 15:11:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092970301_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 15:11:15 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092970301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092970301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 15:11:15 2011] fullrun_pn_xmm0092970301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 15:11:15 2011] fullrun_pn_xmm0092970301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 15:11:15 2011] Fit fullrun_pn_xmm0092970301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 15:35:43 2011] Spatial fit model total counts = 88.998400, observed total counts = 89.000000
[Wed Sep 28 15:35:43 2011] Offset between fit and detection position for source 1 = 0.427140 pixels
[Wed Sep 28 15:35:43 2011] 89.784300 total counts/ 64.711900 bgd. counts: snr = 3.116763
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.427140 pixels
  Position = (445.9, 291.6) = 10 29 44.81 -46 21 51.7
  Extent = 5.3 (3.7-7.5)", rotation angle = 0
  Source counts = 25.1 +/- 9.5
  Background counts = 64.7
  Rate = 0.005 +/- 0.002
[Wed Sep 28 15:35:43 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 15:35:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 15:35:43 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 15:35:43 2011] Source does appear to be extended
[Wed Sep 28 15:35:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 15:35:51 2011] XMMSAS src. selection expression = ellipse(38748.871080, 25319.038400, 316.597209, 316.597209, 0.000000, X, Y)
[Wed Sep 28 15:35:51 2011] Writing source region out to fullrun_pn_xmm0092970301_pi300-10000_pass1_cl_src1_src.reg
[Wed Sep 28 15:35:51 2011] Extracting stamp from image fullrun_pn_xmm0092970301_pi300-10000_cl_sm2.00.img.gz, (428, 273) - (464, 310)
[Wed Sep 28 15:35:51 2011] XMMSAS bgd. selection expression = annulus(38748.871080, 25319.038400, 527.662015, 1055.324030, X, Y)
[Wed Sep 28 15:35:51 2011] Writing fullrun_pn_xmm0092970301_pi300-10000_pass1_cl_src1.gif
[Wed Sep 28 15:35:54 2011] Mean detx,y = (9015.10, 9433.40) 
[Wed Sep 28 15:35:56 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 15:36:14 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 15:36:14 2011] Setting source spectrum file to fullrun_pn_xmm0092970301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 15:36:14 2011] Setting bgd. spectrum file to fullrun_pn_xmm0092970301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Sep 28 15:38:45 2011] Not generating rmf since there are only 25 counts
[Wed Sep 28 15:38:45 2011] rmf not generated due to insufficient counts
[Wed Sep 28 15:43:27 2011] Updating aperture counts using extracted products
[Wed Sep 28 15:43:27 2011] Error reading totcts from fullrun_pn_xmm0092970301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 15:43:27 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 15:43:27 2011] Using photon index=1.80, rate=0.00506, arf fullrun_pn_xmm0092970301_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 15:43:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 15:43:27 2011] Updating source flux to 3.6e-14
[Wed Sep 28 15:43:30 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 15:43:31 2011] xmm0092970301/analysis//spectral/fullrun_pn_xmm0092970301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete