[Fri Aug  3 10:24:29 2012] Detection parameters:
  Position = (205.7, 274.3) = 14 9 53.77 26 18 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.6 +/- 13.5
  Background counts = 36.9
  Rate = 0.003 +/- 0.0005

[Fri Aug  3 10:24:30 2012] Off-axis axis estimate = 6.95'
[Fri Aug  3 10:30:09 2012] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 10:30:09 2012] Initial guess for spatial extent in simple fitting = 9.90"
[Fri Aug  3 10:30:09 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.811
[Fri Aug  3 10:30:09 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 9.90"
[Fri Aug  3 13:57:06 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src68.ximg exists
[Fri Aug  3 13:57:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src68.csv
[Fri Aug  3 13:57:06 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src68_1.ximg exists
[Fri Aug  3 13:57:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src68.csv
[Fri Aug  3 13:57:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 13:57:07 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Fri Aug  3 13:57:07 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Fri Aug  3 13:57:07 2012] Fit fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src68 appears to have run properly
[Fri Aug  3 15:53:12 2012] Spatial fit model total counts = 461.265000, observed total counts = 458.000000
[Fri Aug  3 15:53:12 2012] Offset between fit and detection position for source 71 = 0.241204 pixels
[Fri Aug  3 15:53:12 2012] 462.896100 total counts/ 415.171000 bgd. counts: snr = 2.342251
Spatial fit parameters:
  Offset between fit and detection position for source 71 = 0.241204 pixels
  Position = (205.6, 274.5) = 14 9 53.80 26 18 17.0
  Extent = 3.9 (2.7-5.7)", rotation angle = 0
  Source counts = 47.7 +/- 21.5
  Background counts = 415.2
  Rate = 0.001 +/- 0.0006
[Fri Aug  3 15:53:12 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 15:53:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 15:53:12 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 15:53:12 2012] Source does appear to be extended
[Fri Aug  3 15:53:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 15:53:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 15:53:41 2012] Initial guess for spatial extent in simple fitting = 3.87"
[Fri Aug  3 15:53:41 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.167
[Fri Aug  3 15:53:41 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 3.87"
[Fri Aug  3 18:36:53 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_src67.ximg exists
[Fri Aug  3 18:36:53 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_src67_1.ximg exists
[Fri Aug  3 18:36:53 2012] Fit fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_src67 appears to have run properly
[Fri Aug  3 18:36:55 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Fri Aug  3 18:36:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src67.csv
[Fri Aug  3 18:36:55 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Fri Aug  3 18:36:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src67.csv
[Fri Aug  3 18:36:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 20:10:55 2012] Warning, spatial fit 67 centroid is now closest to src. 32
[Fri Aug  3 20:10:55 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 20:10:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 20:10:55 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 20:10:55 2012] Source does appear to be extended
[Fri Aug  3 20:10:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 20:11:23 2012] XMMSAS src. selection expression = ellipse(17837.992200, 23834.190600, 231.983407, 231.983407, 0.000000, X, Y)
[Fri Aug  3 20:11:23 2012] Writing source region out to fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src71_src.reg
[Fri Aug  3 20:11:23 2012] Extracting stamp from image fullrun_pn_xmm0092850501_pi300-10000_cl_sm2.00.img.gz, (192, 261) - (219, 288)
[Fri Aug  3 20:11:23 2012] XMMSAS bgd. selection expression = annulus(17837.992200, 23834.190600, 386.639011, 773.278022, X, Y) && !ellipse(18493.186493, 24916.950226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17000.089615, 25127.435638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17473.150787, 25087.703125, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug  3 20:11:23 2012] Writing fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src71.gif
[Fri Aug  3 21:11:54 2012] Mean detx,y = (6609.08, 4764.45) 
[Fri Aug  3 21:11:57 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 21:12:08 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 21:12:08 2012] Setting source spectrum file to fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Fri Aug  3 21:12:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Fri Aug  3 22:41:55 2012] Not generating rmf since there are only 47 counts
[Fri Aug  3 22:41:55 2012] rmf not generated due to insufficient counts
[Fri Aug  3 23:45:38 2012] Updating aperture counts using extracted products
[Fri Aug  3 23:45:38 2012] Error reading totcts from fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Fri Aug  3 23:45:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 23:45:39 2012] Using photon index=1.80, rate=0.00123, arf fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src71.arf
[Fri Aug  3 23:45:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 23:45:39 2012] Updating source flux to 6e-15
[Fri Aug  3 23:46:47 2012] Source 71 has fewer than 100.000000 counts, skipping spectral fitting