[Fri Aug  3 10:24:26 2012] Detection parameters:
  Position = (201.9, 399.9) = 14 9 55.03 26 27 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.4 +/- 13.4
  Background counts = 32.6
  Rate = 0.002 +/- 0.0003

[Fri Aug  3 10:24:30 2012] Off-axis axis estimate = 10.16'
[Fri Aug  3 10:30:09 2012] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 10:30:09 2012] Initial guess for spatial extent in simple fitting = 11.51"
[Fri Aug  3 10:30:09 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.910
[Fri Aug  3 10:30:09 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 11.51"
[Fri Aug  3 13:57:05 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src20.ximg exists
[Fri Aug  3 13:57:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src20.csv
[Fri Aug  3 13:57:05 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Aug  3 13:57:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src20.csv
[Fri Aug  3 13:57:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 13:57:06 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Aug  3 13:57:06 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Aug  3 13:57:06 2012] Fit fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Fri Aug  3 15:53:12 2012] Warning, spatial fit 20 centroid is now closest to src. 47
[Fri Aug  3 15:53:12 2012] Spatial fit model total counts = 539.356000, observed total counts = 539.000000
[Fri Aug  3 15:53:12 2012] Offset between fit and detection position for source 21 = 1.630270 pixels
[Fri Aug  3 15:53:12 2012] Warning, changing simple spatial fit ID from 20 to 44
[Fri Aug  3 15:53:12 2012] 539.491000 total counts/ 418.432000 bgd. counts: snr = 5.918132
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.630270 pixels
  Position = (203.0, 398.7) = 14 9 54.68 26 27 17.3
  Extent = 22.5 (22.4-44.9)" x 6.0 (4.3-9.1)", rotation angle = 51 (43-58) degrees
  Source counts = 121.1 +/- 23.2
  Background counts = 418.4
  Rate = 0.003 +/- 0.0006
[Fri Aug  3 15:53:12 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 15:53:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 15:53:12 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 15:53:12 2012] Source does appear to be extended
[Fri Aug  3 15:53:12 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.45
[Fri Aug  3 15:53:12 2012] Source is asymmetric
[Fri Aug  3 15:53:12 2012] Source is confused with source 45
[Fri Aug  3 15:53:12 2012] Source is confused with source 47
[Fri Aug  3 15:53:12 2012] Source is confused with source 48
[Fri Aug  3 15:53:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 15:53:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 15:53:41 2012] Initial guess for spatial extent in simple fitting = 14.25"
[Fri Aug  3 15:53:41 2012] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.982
[Fri Aug  3 15:53:41 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 14.25"
[Fri Aug  3 18:36:53 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_src20.ximg exists
[Fri Aug  3 18:36:53 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Aug  3 18:36:53 2012] Fit fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_src20 appears to have run properly
[Fri Aug  3 18:36:54 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Aug  3 18:36:54 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Aug  3 18:36:54 2012] Fit fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Fri Aug  3 20:10:54 2012] Spatial fit model total counts = 769.621000, observed total counts = 746.000000
[Fri Aug  3 20:10:54 2012] Offset between fit and detection position for source 21 = 0.758898 pixels
[Fri Aug  3 20:10:54 2012] 767.074000 total counts/ 619.011000 bgd. counts: snr = 5.951102
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.758898 pixels
  Position = (203.6, 398.3) = 14 9 54.47 26 27 15.6
  Extent = 28.5 (25.4-57.0)" x 5.5 (4.1-6.9)", rotation angle = 52 (47-56) degrees
  Source counts = 148.1 +/- 27.7
  Background counts = 619.0
  Rate = 0.004 +/- 0.0007
[Fri Aug  3 20:10:55 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 20:10:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 20:10:55 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 20:10:55 2012] Source does appear to be extended
[Fri Aug  3 20:10:55 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.69
[Fri Aug  3 20:10:55 2012] Source is asymmetric
[Fri Aug  3 20:11:21 2012] XMMSAS src. selection expression = ellipse(17666.318200, 34604.709400, 1709.874049, 330.912610, 52.245000, X, Y)
[Fri Aug  3 20:11:21 2012] Writing source region out to fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src21_src.reg
[Fri Aug  3 20:11:21 2012] Extracting stamp from image fullrun_pn_xmm0092850501_pi300-10000_cl_sm2.00.img.gz, (105, 300) - (302, 497)
[Fri Aug  3 20:11:21 2012] XMMSAS bgd. selection expression = annulus(17666.318200, 34604.709400, 2849.790082, 5699.580164, X, Y) && !ellipse(14095.101257, 31925.975342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22937.009918, 37552.274475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19593.703200, 33450.315800, 648.975219, 203.699206, 158.003295, X, Y) && !ellipse(17433.540000, 34520.524000, 1763.944051, 1763.944051, 0.000000, X, Y) && !ellipse(17923.736000, 34187.054000, 2214.968064, 2214.968064, 0.000000, X, Y) && !ellipse(18298.017944, 33893.516663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18572.170000, 33456.694000, 3142.784090, 3142.784090, 0.000000, X, Y) && !ellipse(18769.101800, 33108.112000, 1724.736050, 517.588015, 52.021600, X, Y) && !ellipse(19393.558000, 32460.576000, 2227.856064, 2227.856064, 0.000000, X, Y) && !ellipse(19651.093887, 31964.489197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20357.776000, 31087.588000, 1619.000047, 1619.000047, 0.000000, X, Y) && !ellipse(22280.982400, 30747.213800, 381.018411, 381.018411, 0.000000, X, Y) && !ellipse(20748.552601, 30517.533188, 2592.848075, 582.589499, 238.869479, X, Y) && !ellipse(21589.226000, 29341.940000, 2592.848075, 2592.848075, 0.000000, X, Y) && !ellipse(20980.353600, 29451.850200, 323.167209, 323.167209, 0.000000, X, Y) && !ellipse(22248.464000, 28574.862000, 1296.424037, 1296.424037, 0.000000, X, Y) && !ellipse(22177.060000, 28703.694000, 1296.288037, 1296.288037, 0.000000, X, Y) && !ellipse(14241.480988, 28231.725098, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug  3 20:11:21 2012] Writing fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src21.gif
[Fri Aug  3 20:31:20 2012] Mean detx,y = (157.16, 13385.83) 
[Fri Aug  3 20:31:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 20:32:12 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 20:32:12 2012] Setting source spectrum file to fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Aug  3 20:32:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri Aug  3 23:45:37 2012] Updating aperture counts using extracted products
[Fri Aug  3 23:45:37 2012] Error reading totcts from fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Aug  3 23:45:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 23:45:38 2012] Using photon index=1.80, rate=0.00382, arf fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src21.arf
[Fri Aug  3 23:45:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 23:45:38 2012] Updating source flux to 2.1e-14
[Fri Aug  3 23:46:47 2012] Flag c found in src. 21 procflags, skipping spectral fitting