[Fri Aug  3 10:24:25 2012] Detection parameters:
  Position = (226.5, 126.3) = 14 9 46.98 26 7 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1708.2 +/- 50.4
  Background counts = 35.1
  Rate = 0.04 +/- 0.001

[Fri Aug  3 10:24:30 2012] Off-axis axis estimate = 13.53'
[Fri Aug  3 10:30:09 2012] Using EEF radius (= 13.19 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 10:30:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 10:30:09 2012] Initial guess for spatial extent in simple fitting = 13.19"
[Fri Aug  3 10:30:09 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.982
[Fri Aug  3 10:30:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.19"
[Fri Aug  3 13:57:05 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug  3 13:57:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 13:57:05 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug  3 13:57:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 13:57:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 13:57:06 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug  3 13:57:06 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug  3 13:57:06 2012] Fit fullrun_pn_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug  3 15:53:11 2012] Spatial fit model total counts = 2476.920000, observed total counts = 2320.000000
[Fri Aug  3 15:53:11 2012] Offset between fit and detection position for source 1 = 0.306563 pixels
[Fri Aug  3 15:53:11 2012] 2472.740000 total counts/ 1232.110000 bgd. counts: snr = 35.344150
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.306563 pixels
  Position = (226.7, 126.5) = 14 9 46.92 26 7 33.4
  Extent = 6.6 (6.2-6.9)", rotation angle = 0
  Source counts = 1240.6 +/- 49.7
  Background counts = 1232.1
  Rate = 0.03 +/- 0.001
[Fri Aug  3 15:53:12 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 15:53:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 15:53:12 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 15:53:12 2012] Source does appear to be extended
[Fri Aug  3 15:53:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 15:53:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 15:53:41 2012] Initial guess for spatial extent in simple fitting = 6.60"
[Fri Aug  3 15:53:41 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.983
[Fri Aug  3 15:53:41 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.60"
[Fri Aug  3 18:36:52 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug  3 18:36:52 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug  3 18:36:52 2012] Fit fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Aug  3 18:36:53 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug  3 18:36:53 2012] fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug  3 18:36:53 2012] Fit fullrun_pn_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug  3 20:10:54 2012] Spatial fit model total counts = 1849.990000, observed total counts = 1839.000000
[Fri Aug  3 20:10:54 2012] Offset between fit and detection position for source 1 = 0.037516 pixels
[Fri Aug  3 20:10:54 2012] 1866.150000 total counts/ 626.610000 bgd. counts: snr = 49.517862
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.037516 pixels
  Position = (226.7, 126.5) = 14 9 46.93 26 7 33.3
  Extent = 8.3" x 4.7", rotation angle = 24
  Source counts = 1239.5 +/- 43.2
  Background counts = 626.6
  Rate = 0.03 +/- 0.001
[Fri Aug  3 20:10:55 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 20:10:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 20:10:55 2012] Assessing source extent using major
[Fri Aug  3 20:10:55 2012] Source does appear to be extended
[Fri Aug  3 20:10:55 2012] Computing asymmetry using major and minor axis, asym = 1.77
[Fri Aug  3 20:10:55 2012] Source is asymmetric
[Fri Aug  3 20:11:21 2012] Counts = 1239.540000, rescaling region sizes by 2.000000
[Fri Aug  3 20:11:21 2012] XMMSAS src. selection expression = ellipse(19674.251000, 10956.902600, 1000.833629, 565.893616, 24.245580, X, Y)
[Fri Aug  3 20:11:21 2012] Writing source region out to fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug  3 20:11:21 2012] Extracting stamp from image fullrun_pn_xmm0092850501_pi300-10000_cl_sm2.00.img.gz, (169, 69) - (284, 184)
[Fri Aug  3 20:11:21 2012] XMMSAS bgd. selection expression = annulus(19674.251000, 10956.902600, 3336.112096, 6672.224192, X, Y) && !ellipse(21200.387115, 10850.983353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26620.047974, 18414.422394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26486.598236, 17774.654587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17142.158905, 15254.260498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20316.065887, 10150.033051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19126.478683, 18436.995453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25615.335020, 17580.959800, 342.936810, 342.936810, 0.000000, X, Y) && !ellipse(26684.384644, 15000.012238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24425.485718, 14237.466583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21469.157900, 13508.021600, 421.227212, 421.227212, 0.000000, X, Y) && !ellipse(17992.005357, 13149.112611, 842.456024, 549.018292, 46.034763, X, Y) && !ellipse(22775.177917, 9431.953827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22482.667400, 17642.353200, 462.990413, 435.552813, 18.618000, X, Y) && !ellipse(23372.624260, 17177.788000, 396.128011, 396.128011, 0.000000, X, Y) && !ellipse(25244.185000, 16524.932600, 912.432026, 433.682412, 340.488000, X, Y) && !ellipse(18153.467529, 16028.968842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20270.732590, 15562.908981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21796.903168, 12190.100479, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug  3 20:11:21 2012] Writing fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src1.gif
[Fri Aug  3 20:11:41 2012] Mean detx,y = (12994.94, -6560.87) 
[Fri Aug  3 20:11:45 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 20:13:37 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 20:13:37 2012] Setting source spectrum file to fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug  3 20:13:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug  3 23:45:37 2012] Updating aperture counts using extracted products
[Fri Aug  3 23:45:37 2012] Error reading totcts from fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug  3 23:45:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 23:45:38 2012] Using photon index=1.80, rate=0.0319, arf fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src1.arf
[Fri Aug  3 23:45:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 23:45:38 2012] Updating source flux to 1.8e-13
[Fri Aug  3 23:49:52 2012] Reading fit data from xmm0092850501/analysis//spectral/fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src1_pl.csv
[Fri Aug  3 23:49:52 2012] Spectral fit parameter nH value = 2.94576e+16
[Fri Aug  3 23:49:52 2012] Spectral fit parameter PhoIndex value = 1.89737
[Fri Aug  3 23:49:52 2012] Failed to get F(0.3-8.0) from xmm0092850501/analysis//spectral/fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Aug  3 23:49:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 23:49:52 2012] Using Nh = 2.9e+16, photon index=1.90, rate=0.0319, arf fullrun_pn_xmm0092850501_pi300-10000_pass1_cl_src1.arf
[Fri Aug  3 23:49:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 23:49:52 2012] Updating source flux to 1.7e-13